Iutam Symposium On New Applications Of Nonlinear And Chaotic Dynamics In Mechanics

This book presents the latest research results in the area of applied nonlinear dynamics and chaos theory. Papers by three academic generations address new applications of nonlinear dynamics to mechanics, including fluid-structure interaction, machining and mechanics of solids, and many other applications.

The interest of the applied mechanics community in chaotic dynamics of engineering systems has exploded in the last fifteen years, although research activity on nonlinear dynamical problems in mechanics started well before the end of the Eighties. It developed first within the general context of the classical theory of nonlinear oscillations, or nonlinear vibrations, and of the relevant engineering applications. This was an extremely fertile field in terms of formulation of mechanical and mathematical models, of development of powerful analytical techniques, and of understanding of a number of basic nonlinear phenomena. At about the same time, meaningful theoretical results highlighting new solution methods and new or complex phenomena in the dynamics of deterministic systems were obtained within dynamical systems theory by means of sophisticated geometrical and computational techniques. In recent years, careful experimental studies have been made to establish the actual occurrence and observability of the predicted dynamic phenomena, as it is vitally needed in all engineering fields. Complex dynamics have been shown to characterize the behaviour of a great number of nonlinear mechanical systems, ranging from aerospace engineering applications to naval applications, mechanical engineering, structural engineering, robotics and biomechanics, and other areas. The International Union of Theoretical and Applied Mechanics grasped the importance of such complex phenomena in the Eighties, when the first IUTAM Symposium devoted to the general topic of nonlinear and chaotic dynamics in applied mechanics and engineering was held in Stuttgart (1989).

The IUT AM / IFToMM Symposium on Synthesis of Nonlinear Dynamical Systems, held in Riga, Latvia, 24-28 August 1998, was one of a series of IUTAM sponsored symposia which focus on the theory and application of methods of nonlinear dynamics in mechanics. The symposium follows eighteen symposia on Analysis and Synthesis of Nonlinear Mechanical Oscillatory Systems held at Riga Technical University from 1971 to 1991 and in 1996 (prof. E. Lavendelis and Prof. M. Zakrzhevsky). Early in the late fifties and sixties Prof. J. G. Panovko organised several successful conferences in Riga on Nonlinear Oscillations. The participants in all these conferences and symposia (except 1996) were only from the ex-Soviet Union. This symposium, organised by the Institute of Mechanics of Riga Technical University, brought together scientists active in different fields of nonlinear dynamics. Selected scientists from 14 countries represented a wide range of expertise in' mechanics, from pure theoreticians to people primarily oriented towards application of nonlinear and chaotic dynamics and nonlinear oscillations. The goal of the symposium was to stimulate development of the theory of strongly nonlinear dynamical systems and its new applications in the fields of applied mechanics, engineering and other branches of science and technology.

This is a state-of-the-art treatise on the problems of both nonlinearity and uncertainty in the dynamics and control of engineering systems. The concept of dynamics and control implies the combination of dynamic analysis and control synthesis. It is essential to gain insight into the dynamics of a nonlinear system with uncertainty if any new control strategy is designed to utilize nonlinearity.

This is the proceedings of the IUTAM Symposium on Exploiting Nonlinear Dynamics for Engineering Systems that was held in Novi Sad, Serbia, from July 15th to 19th, 2018. The appearance of nonlinear phenomena used to be perceived as dangerous, with a general tendency to avoid them or control them. This perception has led to intensive research using various approaches and tailor-made tools developed over decades. However, the Nonlinear Dynamics of today is experiencing a profound shift of paradigm since recent investigations rely on a different strategy which brings good effects of nonlinear phenomena to the forefront. This strategy has a positive impact on different fields in science and engineering, such as vibration isolation, energy harvesting, micro/nano-electro-mechanical systems, etc. Therefore, the ENOLIDES Symposium was devoted to demonstrate the benefits and to unlock the potential of exploiting nonlinear dynamical behaviour in these but also in other emerging fields of science and engineering. This proceedings is useful for researchers in the fields of nonlinear dynamics of mechanical systems and structures, and in Mechanical and Civil Engineering.

During the last decades, applications of dynamical analysis in advanced, often nonlinear, engineering systems have been evolved in a revolutionary way. In this context one can think of applications in aerospace engineering like satellites, in naval engineering like ship motion, in mechanical engineering like rotating machinery, vehicle systems, robots and biomechanics, and in civil engineering like earthquake dynamics and offshore technology. One could continue with this list for a long time. The application of advanced dynamics in the above fields has been possible due to the use of sophisticated computational techniques employing powerful concepts of nonlinear dynamics. These concepts have been and are being developed in mathematics, mechanics and physics. It should be remarked that careful experimental studies are vitally needed to establish the real existence and observability of the predicted dynamical phenomena. The interaction between nonlinear dynamics and nonlinear control in advanced engineering systems is becoming of increasing importance because of several reasons. Firstly, control strategies in nonlinear systems are used to obtain desired dynamic behaviour and improved reliability during operation, Applications include power plant rotating machinery, vehicle systems, robotics, etc. Terms like motion control, optimal control and adaptive control are used in this field of interest. Since mechanical and electronic components are often necessary to realize the desired action in practice, the engineers use the term mechatronics to indicate this field. If the desired dynamic behaviour is achieved by changing design variables (mostly called system parameters), one can think of fields like control of chaos.

Actuating materials hold a promise for fast-spreading applications in smart structures and active control systems, and have attracted extensive attention from scientists of both mechanics and materials sciences communities. High performance and stability of actuating materials and structures play a decisive role in their successive applications as sensors and actuators in structural control and robotics. The advances of actuating materials, however, recently encountered a severe reliability issue. For a better understanding toward this issue, scientific efforts are of paramount significance to gain a deep insight into the intricate deformation and failure behaviors of actuating materials. To examine the state of the art in this subject, the general assembly of IUTAM approved in August, 2002 at Cambridge University, UK, a proposal to hold an IUTAM symposium to summarize the relevant research findings. The main themes of the symposium are: (i) the constitutive relations of actuating materials that couple mechanical, electrical, thermal and magnetic properties, as well as incorporate phase transformation and domain switch; (ii) the physical mechanisms of deformation, damage, and fatigue crack growth of actuating materials; (iii) the development of failure-resilient approaches that base on the macro-, meso-, and micro-mechanics analyses; (iv) the investigation of microstructural evolution, stability of phase transformation, and size effects of ferroelectric ceramics, shape memory alloys, actuating polymers, and bio-actuating materials. The above problems represent an exciting challenge and form a research thrust of both materials science and solid mechanics. The IUTAM Symposium (GA.

This book is a collection of selected reviewed papers that were presented at the International Union of Theoretical and Applied Mechanics Symposium "Mechanical waves for composite structures characterization". The Symposium took place June 14-17, 2000 in Chania, Crete, Greece. As is customary, IUTAM Symposia Proceedings are published in the series "Solid Mechanics and Its Applications" by Kluwer Academic Publishers. I am indebted to Professor G. M. L. Gladwell who is the series editor. I would also like to take this opportunity to express my sincere gratitude to Professor M. A. Hayes the Secretary General of the International Union of Theoretical and Applied Mechanics and a member ofthe Symposium's Scientific Committee. His constant encouragement and support made the Symposium not only possible but also successful. To the success also contributed all the members of the Symposium's Scientific Committee which I had the honor to chair. I express my appreciation to each one of them who are: Professor J. D. Achenbach (Northwestern University, Evanston, Illinois, USA), Professor M. A. Hayes (University College, Dublin, Ireland), Professor K. J. Langenberg (University of Kassel, Germany), Professor A. K. Mal (University of California, Los Angeles, USA), Professor X. Markenscoff (University of California, San Diego, USA), Professor S. Nair (Illinois Institute of Technology, Chicago, USA), Professor R. W. Ogden (University of Glasgow, UK), Professor G.