Jc T 2055 2011 Translated English Of Chinese Standard Jct 2055 2011 Jc T2055 2011 Jct2055 2011

This Standard specifies the requirements, test methods, inspection rules, packaging, transportation, and storage, etc. of particle bentonite for pet litters. This Standard applies to particle bentonite for pet litters processed from natural bentonite.

This Standard, in combination with the specific conditions of steel chemical vessels, is the supplement and concretization of the fabrication part in Steel Pressure Vessels GB 150. The application scope of this Standard, unless otherwise specified, is the same as that of Steel Pressure Vessels GB 150.

This Standard specifies the definition, order contents, size, shape, weight, permissible deviation, technical requirements, test methods, inspection rules, transportation, storage, marking and quality certificate of continuous casting square and rectangular blank of non-alloy steel, low alloy steel, and alloy steel.

This Standard specifies the definition, order contents, dimensions, appearance, weight as well as allowable deviation, technical requirements, test methods, inspection rules, transport, storage, marks, and quality certificate of non-alloy steel, low-alloy steel, and alloy-steel continuous casting square and rectangular blank.

This standard specifies the technical requirements, inspection methods and rules for the annealed and quenched & annealed stainless steel rolling bearing rings and rolling elements (hereinafter referred to as bearing parts) which are made from G95Cr18 (original designation 9Cr18), G102Cr18Mo (original designation 9Cr18Mo), G65Cr14Mo that comply with the provisions of GB/T 3086-2008. This standard applies to the heat-treatment quality inspection of bearing parts made of the above materials.

This Standard specifies the terms and definitions, compositions and materials, technical requirements, test methods, inspection rules, package, marking, transportation and storage, etc. of the ground granulated electric furnace phosphorous slag powder. This Standard is applicable to the ground granulated electric furnace phosphorous slag powder used as the cement mixture and concrete additive.

This standard specifies the composition, working environment, technical requirements, test methods, inspection rules and markings, packaging, transportation and storage of axle counters.

This part of GB/T 1479 specifies the method for measuring the apparent density of metal powders with a funnel under standard conditions. This part applies to metal powders that can flow freely through a funnel with a pore diameter of 2.5 mm. If the powder is difficult to pass through a pore with a diameter of 2.5 mm but can flow freely through a 5.0 mm pore, this method can also be used.