Logic Circuit Design

In three main divisions the book covers combinational circuits, latches, and asynchronous sequential circuits. Combinational circuits have no memorising ability, while sequential circuits have such an ability to various degrees. Latches are the simplest sequential circuits, ones with the shortest memory. The presentation is decidedly non-standard. The design of combinational circuits is discussed in an orthodox manner using normal forms and in an unorthodox manner using set-theoretical evaluation formulas relying heavily on Karnaugh maps. The latter approach allows for a new design technique called composition. Latches are covered very extensively. Their memory functions are expressed mathematically in a time-independent manner allowing the use of (normal, non-temporal) Boolean logic in their calculation. The theory of latches is then used as the basis for calculating asynchronous circuits. Asynchronous circuits are specified in a tree-representation, each internal node of the tree representing an internal latch of the circuit, the latches specified by the tree itself. The tree specification allows solutions of formidable problems such as algorithmic state assignment, finding equivalent states non-recursively, and verifying asynchronous circuits.

This textbook for courses in Digital Systems Design introduces students to the fundamental hardware used in modern computers. Coverage includes both the classical approach to digital system design (i.e., pen and paper) in addition to the modern hardware description language (HDL) design approach (computer-based). Using this textbook enables readers to design digital systems using the modern HDL approach, but they have a broad foundation of knowledge of the underlying hardware and theory of their designs. This book is designed to match the way the material is actually taught in the classroom. Topics are presented in a manner which builds foundational knowledge before moving onto advanced topics. The author has designed the presentation with learning goals and assessment at its core. Each section addresses a specific learning outcome that the student should be able to “do” after its completion. The concept checks and exercise problems provide a rich set of assessment tools to measure student performance on each outcome.

This is an up-to-date treatment of the analysis and design of CMOS integrated digital logic circuits. The self-contained book covers all of the important digital circuit design styles found in modern CMOS chips, emphasizing solving design problems using the various logic styles available in CMOS.

This practical introduction explains exactly how digital circuits are designed, from the basic circuit to the advanced system. It covers combinational logic circuits, which collect logic signals, to sequential logic circuits, which embody time and memory to progress through sequences of states. The primer also highlights digital arithmetic and the integrated circuits that implement the logic functions.Based on the author's extensive experience in teaching digital electronics to undergraduates, the book translates theory directly into practice and presents the essential information in a compact, digestible style. Worked problems and examples are accompanied by abbreviated solutions, with demonstrations to ensure that the design material and the circuits' operation are fully understood.This is essential reading for any electronic or electrical engineering student new to digital electronics and requiring a succinct yet comprehensive introduction.

This textbook for courses in Digital Systems Design introduces students to the fundamental hardware used in modern computers. Coverage includes both the classical approach to digital system design (i.e., pen and paper) in addition to the modern hardware description language (HDL) design approach (computer-based). Using this textbook enables readers to design digital systems using the modern HDL approach, but they have a broad foundation of knowledge of the underlying hardware and theory of their designs. This book is designed to match the way the material is actually taught in the classroom. Topics are presented in a manner which builds foundational knowledge before moving onto advanced topics. The author has designed the presentation with learning Goals and assessment at its core. Each section addresses a specific learning outcome that the student should be able to “do” after its completion. The concept checks and exercise problems provide a rich set of assessment tools to measure student performance on each outcome.

"Digital Design provides a modern approach to learning the increasingly important topic of digital systems design. The text's focus on register-transfer-level design and present-day applications not only leads to a better appreciation of computers and of today's ubiquitous digital devices, but also provides for a better understanding of careers involving digital design and embedded system design. The book's key features include: An emphasis on register-transfer-level (RTL) design, the level at which most digital design is practiced today, giving readers a modern perspective of the field's applicability. Yet, coverage stays bottom-up and concrete, starting from basic transistors and gates, and moving step-by-step up to more complex components. Extensive use of basic examples to teach and illustrate new concepts, and of application examples, such as pacemakers, ultrasound machines, automobiles, and cell phones, to demonstrate the immediate relevance of the concepts. Separation of basic design from optimization, allowing development of a solid understanding of basic design, before considering the more advanced topic of optimization. Flexible organization, enabling early or late coverage of optimization methods or of HDLs, and enabling choice of VHDL, Verilog, or SystemC HDLs. Career insights and advice from designers with varying levels of experience. A clear bottom-up description of field-programmable gate arrays (FPGAs). About the Author: Frank Vahid is a Professor of Computer Science & Engineering at the University of California, Riverside. He holds Electrical Engineering and Computer Science degrees; has worked/consulted for Hewlett Packard, AMCC, NEC, Motorola, and medical equipment makers; holds 3 U.S. patents; has received several teaching awards; helped setup UCR's Computer Engineering program; has authored two previous textbooks; and has published over 120 papers on digital design topics (automation, architecture, and low-power).

This book will show you how to approach the design covering everything from the circuit specification to the final design acceptance, including what support you can expect, sizing, timing analysis, power and packaging, various simulations, design verification, and design submission.