Mass Transfer And Absorbers

Mass Transfer and Absorbers deals with absorption and mass transfer processes and the factors to consider in designing absorbers. Calculations are supported by a uniform, generalized process driving force, complying with Maxwell's equation, and the coefficients are made as independent as possible in terms of the kind of diffusion and of the values of the concentrations. This volume is comprised of seven chapters and begins with an overview of the general principles of diffusional mass transfer, absorption and stripping, and equilibrium between gas and liquid phases. Steady-state mass transfer by diffusion is then discussed, along with mass transfer in a single phase (forced flow and unforced flow). Subsequent chapters explore design considerations for mass transfer equipment and related problems; adsorption accompanied by a chemical reaction; and problems relating to hydrodynamics. The final chapter is devoted to some practical issues, including economic flow velocity and mechanical features of packed, plate, and spray tower designs. This book is intended for practicing designers and engineers.

This book gives a practical account of the modern theory of calculation of absorbers for binary and multicomponent physical absorption and absorption with simultaneous chemical reaction. The book consists of two parts: the theory of absorption and the calculation of absorbers. Part I covers basic knowledge on diffusion and the theory of mass transfer in binary and multicomponent systems. Significant stress is laid on diffusion theory because this forms the basis for the absorption process. In the next chapters the fundamentals of simultaneous mass transfer and chemical reaction, the theory of the desorption of gases from liquids and the formulation of differential mass balances are discussed. Part II is devoted to the calculation of absorbers and the classification of absorbers. The chapters present calculation methods for the basic types of absorber with a detailed analysis of the calculation methods for packed, plate and bubble columns. The authors illustrate the presented material with a large number of examples, starting with simple ones for binary systems and ending with column calculation for multicomponent systems.

The phenomenon of "mass transfer with chemical reaction" takes place whenever one phase is brought into contact with one or more other phases not in chemical equilibrium with it. This phenomenon has industrial, biological and physiological importance. In chemical process engineering, it is encountered in both separ ation processes and reaction engineering. In some cases, a chemical reaction may deliberately be employed for speeding up the rate of mass transfer and/or for increasing the capacity of the solvent; in other cases the multiphase reaction system is a part of the process with the specific aim of product formation. Finally, in some cases, for instance "distillation with chemical reaction," both objectives are involved. Although the subject is clearly a chemical engineering undertakin, it requires often a good understanding of other subjects, such as chemistry and fluid mechanics etc., leading to publications in diversified areas. On the other har.d, the subject has always been a major field and one of the most fruitful for chemical engineers."

Absorption And Stripping Are Essential Two Very Important Unit Operations Frequently Encountered In Both Cpis And Pcis. In Many Plants, Absorption & Stripping Operate In Conjunction With Distillation The Oldest Unit Operation That Emerged From Alchemists Laboratory Centuries Back.Contents: Absorption; Stripping; Hydraulics Of Operation; Design: Basic Concepts; Design: Absorbers & Strippers; Packings; Packed Tower Internals; Typical Absorptions Of Industrial Importance; Revamping Absorbers And Strippers; Cost Estimation Of Absorption Tower; Miscellaneous; Index; Etc.