Micro Total Analysis Systems 2002

The Sixth International Conference on Miniaturized Chemical and Biochemical Analysis Systems, known as /JTAS2002, will be fully dedicated to the latest scientific and technological developments in the field of miniaturized devices and systems for realizing not only chemical and biochemical analysis but also synthesis. The first /JTAS meeting was held in Enschede in 1994 with approximately 160 participants, bringing together the scientists with background in analytical and biochemistry with those with Micro Electro Mechanical Systems (MEMS) in one workshop. We are grateful to Piet Bergveld and Albert van den Berg of MESA Research Institute of the University of Twente for their great efforts to arrange this exciting first meeting. The policy of the meeting was succeeded by late Prof. Dr. Michael Widmer in the second meeting, /JTAS'96 held in Basel with 275 participants. The first two meetings were held as informal workshops. From the third workshop, /JTAS'98 (420 participants) held in Banff, the workshop had become a worldwide conference. Participants continued to increase in /JTAS2000 (about 500 participants) held in Enschede and /JTAS2001 (about 700 participants) held in Monterey. The number of submitted papers also dramatically increased in this period from 130 in 1998, 230 in 2000 to nearly 400 in 2001. From 2001, /JTAS became an annual symposium. The steering committee meeting held in Monterey, confrrmed the policy of former /JTAS that quality rather than quantity would be the key-point and that the parallel-session format throughout the 3.

The Sixth International Conference on Miniaturized Chemical and Biochemical Analysis Systems, known as IlTAS2002, will be fully dedicated to the latest scientific and technological developments in the field of miniaturized devices and systems for realizing not only chemical and biochemical analysis but also synthesis. The first IlTAS meeting was held in Enschede in 1994 with approximately 160 participants, bringing together the scientists with background in analytical and biochemistry with those with Micro Electro Mechanical Systems (MEMS) in one workshop. We are grateful to Piet Bergveld and Albert van den Berg of MESA Research Institute of the University of Twente for their great efforts to arrange this exciting first meeting. The policy of the meeting was succeeded by late Prof. Dr. Michael Widmer in the second meeting, IlTAS'96 held in Basel with 275 participants. The first two meetings were held as informal workshops. From the third workshop, IlTAS'98 (420 participants) held in Banff, the workshop had become a worldwide conference. Participants continued to increase in IlTAS2000 (about 500 participants) held in Enschede and IlTAS2001 (about 700 participants) held in Monterey. The number of submitted papers also dramatically increased in this period from 130 in 1998, 230 in 2000 to nearly 400 in 2001. From 2001, IlTAS became an annual symposium. The steering committee meeting held in Monterey, confirmed the policy of former IlTAS that quality rather than quantity would be the key-point and that the parallel-session format throughout the 3.

This book covers all the steps in order to fabricate a lab-on-a-chip device starting from the idea, the design, simulation, fabrication and final evaluation. Additionally, it includes basic theory on microfluidics essential to understand how fluids behave at such reduced scale. Examples of successful histories of lab-on-a-chip systems that made an impact in fields like biomedicine and life sciences are also provided. This book also: · Provides readers with a unique approach and toolset for lab-on-a-chip development in terms of materials, fabrication techniques, and components · Discusses novel materials and techniques, such as paper-based devices and synthesis of chemical compounds on-chip · Covers the four key aspects of development: basic theory, design, fabrication, and testing · Provides readers with a comprehensive list of the most important journals, blogs, forums, and conferences where microfluidics and lab-on-a-chip news, methods, techniques and challenges are presented and discussed, as well as a list of companies providing design and simulation support, components, and/or developing lab-on-a-chip and microfluidic devices.

The microfluidic lab-on-a-chip allows scientists to conduct chemical and biochemical analysis in a miniaturized format so small that properties and effects are successfully enhanced, and processes seamlessly integrated. This microscale advantage translates into greater sensitivity, more accurate results, and better information. Microfluidic

Conservation and Restoration of Glass is an in-depth guide to the materials and practices required for the care and preservation of glass objects. It provides thorough coverage of both theoretical and practical aspects of glass conservation. This new edition of Newton and Davison's original book, Conservation of Glass, includes sections on the nature of glass, the historical development and technology of glassmaking, and the deterioration of glass. Professional conservators will welcome the inclusion of recommendations for examination and documentation. Incorporating treatment of both excavated glass and historic and decorative glass, the book provides the knowledge required by conservators and restorers and is invaluable for anyone with glass objects in their care.

Lab-on-a-chip technology permits us to make many important discoveries that can only be observed at the microscale or the nanoscale. Using this technology, biological and biochemical analyses translate into greater sensitivity, more accurate results, and more valuable findings. Authored by one of the field's pioneering researchers, Fundamentals of

I TECHNOLOGIES -- Hydrogels and polymers as components of a lab on a chip -- Microreplication technologies for polymer-based æTAS applications -- Silicon and glass micromachining for æTAS -- Surface chemistry in polymer microfluidic systems -- Plastic microfluidic devices: electrokinetic manipulations, life science applications, and production technologies -- II METHODS -- Transverse diffusion in microfluidic systems -- Nanoliter & picoliter liquid handling -- Micro sequential injection system for monitoring of metabolites extruded by cultured cells -- III CELL- & BEAD-BASED SYSTEMS -- Handling of beads in microfluidic devices for biotech applications -- Particles and molecules handling in micro channels -- Cell counting and cell sizing in microstructures -- IV APPLICATIONS -- Microfabricated capillary array electrophoresis: -- implementation and applications -- Microfluidic systems for analysis of the proteome with mass spectrometry -- Interfacing æTAS to matrix assisted laser desorpt ...