Modeling And Simulation For Rf System Design

Modern telecommunication systems are highly complex from an algorithmic point of view. The complexity continues to increase due to advanced modulation schemes, multiple protocols and standards, as well as additional functionality such as personal organizers or navigation aids. To have short and reliable design cycles, efficient verification methods and tools are necessary. Modeling and simulation need to accompany the design steps from the specification to the overall system verification in order to bridge the gaps between system specification, system simulation, and circuit level simulation. Very high carrier frequencies together with long observation periods result in extremely large computation times and requires, therefore, specialized modeling methods and simulation tools on all design levels. The focus of Modeling and Simulation for RF System Design lies on RF specific modeling and simulation methods and the consideration of system and circuit level descriptions. It contains application-oriented training material for RF designers which combines the presentation of a mixed-signal design flow, an introduction into the powerful standardized hardware description languages VHDL-AMS and Verilog-A, and the application of commercially available simulators. Modeling and Simulation for RF System Design is addressed to graduate students and industrial professionals who are engaged in communication system design and want to gain insight into the system structure by own simulation experiences. The authors are experts in design, modeling and simulation of communication systems engaged at the Nokia Research Center (Bochum, Germany) and the Fraunhofer Institute for Integrated Circuits, Branch Lab Design Automation (Dresden, Germany).

Modern telecommunication systems are highly complex from an algorithmic point of view. The complexity continues to increase due to advanced modulation schemes, multiple protocols and standards, as well as additional functionality such as personal organizers or navigation aids. To have short and reliable design cycles, efficient verification methods and tools are necessary. Modeling and simulation need to accompany the design steps from the specification to the overall system verification in order to bridge the gaps between system specification, system simulation, and circuit level simulation. Very high carrier frequencies together with long observation periods result in extremely large computation times and requires, therefore, specialized modeling methods and simulation tools on all design levels. The focus of Modeling and Simulation for RF System Design lies on RF specific modeling and simulation methods and the consideration of system and circuit level descriptions. It contains application-oriented training material for RF designers which combines the presentation of a mixed-signal design flow, an introduction into the powerful standardized hardware description languages VHDL-AMS and Verilog-A, and the application of commercially available simulators. Modeling and Simulation for RF System Design is addressed to graduate students and industrial professionals who are engaged in communication system design and want to gain insight into the system structure by own simulation experiences. The authors are experts in design, modeling and simulation of communication systems engaged at the Nokia Research Center (Bochum, Germany) and the Fraunhofer Institute for Integrated Circuits, Branch Lab Design Automation (Dresden, Germany).

With the growing complexity of personal mobile communication systems demanding higher data-rates and high levels of integration using low-cost CMOS technology, overall system performance has become more sensitive to RF analog front-end impairments. Designing integrated transceivers requires a thorough understanding of the whole transceiver chain including RF analog front-end and digital baseband. Communication system engineers have to include RF analog imperfections in their simulation benches in order to study and quantify their impact on the system performance. Here the author explores key RF analog impairments in a transceiver and demonstrates how to model their impact from a communication system design view-point. He discusses the design aspects of the front end of transceivers (both receivers and transmitters) and provides the reader with a way to optimize a complex mixed-signal platform by taking into account the characteristics of the RF/analog front-end. Key features of this book include: Practical examples illustrated by system simulation results based on WiFi and mobile WiMAX OFDM transceivers An overview of the digital estimation and compensation of the RF analog impairments such as power amplifier distortion, quadrature imbalance, and carrier and sampling frequency offsets An exposition of the challenges involved in the design of both RF analog circuits and DSP communication circuits in deep submicron CMOS technology MATLAB® codes for RF analog impairments models hosted on the companion website Uniquely the book bridges the gap between RFIC design specification needs and communication systems simulation, offering readers RF analog impairments modeling knowledge and a comprehensive approach to unifying theory and practice in system modelling. It is of great value to communication systems and DSP engineers and graduate students who design communication processing engines, RF/analog systems and IC design engineers involved in the design of communication platforms.

New Topics in Simulation and Modeling of RF Circuits addresses two main topics: simulation of RF circuits and new models of nonlinear power BAW resonators and filters. Since RF circuits have several unique features, and all analysis methods are based on the circuit essential properties, the book begins by describing the properties of RF circuits, characterization of circuits with customary and uncustomary behavior and some theorems of solutions existence and uniqueness for dynamic nonlinear circuits. Thereafter, the main time domain and frequency domain analysis methods for RF circuits are presented. The advantages and disadvantages of each method have been highlighted, and an algorithm for the time step choice in transient analysis based on energy balance errors is also presented. Lastly, the final part contains some nonlinear circuit models of power BAW resonators. The behavioral models for the time domain analysis are simple circuits containing weakly nonlinear elements. The behavioral models for frequency domain analysis are based on the measured values of the frequency dependent S parameters for a set of incident powers. S parameters corresponding to certain intermodulation products of practical interest are also considered. The physical models contain artificial transmission lines with nonlinear circuit elements corresponding to mechanical and electrical nonlinearities.

CMOS technology has now reached a state of evolution, in terms of both frequency and noise, where it is becoming a serious contender for radio frequency (RF) applications in the GHz range. Cutoff frequencies of about 50 GHz have been reported for 0.18 æm CMOS technology, and are expected to reach about 100 GHz when the feature size shrinks to 100 nm within a few years. This translates into CMOS circuit operating frequencies well into the GHz range, which covers the frequency range of many of today's popular wireless products, such as cell phones, GPS (Global Positioning System) and Bluetooth. Of course, the great interest in RF CMOS comes from the obvious advantages of CMOS technology in terms of production cost, high-level integration, and the ability to combine digital, analog and RF circuits on the same chip. This book discusses many of the challenges facing the CMOS RF circuit designer in terms of device modeling and characterization, which are crucial issues in circuit simulation and design.

More than ever, FDL is the place for researchers, developers, industry designers, academia, and EDA tool companies to present and to learn about the latest scientific achievements, practical applications and users experiences in the domain of specification and design languages. FDL covers the modeling and design methods, and their latest supporting tools, for complex embedded systems, systems on chip, and heterogeneous systems. FDL 2009 is the twelfth in a series of events that were held all over Europe, in selected locations renowned for their Universities and Reseach Institutions as well as the importance of their industrial environment in Computer Science and Micro-electronics. In 2009, FDL was organized in the attractive south of France area of Sophia Antipolis. together with the DASIP (Design and Architectures for Signal and Image Processing) Conference and the SAME (Sophia Antipolis MicroElectronics ) Forum. All submitted papers were carefully reviewed to build a program with 27 full and 10 short contributions. From these, the Program Committee selected a shorter list, based on the evaluations of the reviewers, and the originality and relevance of the work that was presented at the Forum. The revised, and sometimes extended versions of these contributions constitute the chapters of this volume. Advances in Design Methods from Modeling Languages for Embedded Systems and SoC’s presents extensions to standard specification and description languages, as well as new language-based design techniques and methodologies to solve the challenges raised by mixed signal and multi-processor systems on a chip. It is intended as a reference for researchers and lecturers, as well as a state of the art milestone for designers and CAD developers.

Modeling and Simulation Environment for Satellite and Terrestrial Communications Networks: Proceedings of the European COST Telecommunications Symposium will be of interest to network designers, developers, and operators. This book is a collection of papers given at the European Cost Telecommunications Symposium. The Symposium was broken down into four sessions: Modelling and Simulation. Teletraffic Modelling. Communications Networks Simulation. Problems in Simulation. Each session addressed a wide spectrum of subjects. The symposium covered nearly all of the important aspects of simulation modeling and tools for the design and performance evaluation of communication techniques and systems. Emerging techniques were emphasized. Modeling and Simulation Environment for Satellite and Terrestrial Communications Networks: Proceedings of the European COST Telecommunications Symposium is a useful reference work for practicing engineers and academic researchers.

This book focuses on practical computational electrodynamics, guiding the reader step-by-step through the modeling process from the initial "what question must the model answer?", through the setting up of a computer model, to post processing, validation and optimization. The book offers a realistic view of the capabilities and limits of current 3-D field simulators and how to apply this knowledge efficiently to EM analysis and design of RF applications in modern communication systems.