Non Destructive In Situ Strength Assessment Of Concrete

The book presents the work of the RILEM Technical Committee 249-ISC. Addressing the effective application of new recommendations for non-destructive in situ strength assessment of concrete, it provides information about the different steps of the investigation and processing of test results, until the delivery of strength estimates, and includes tables giving the minimum required number of cores in a variety of situations as well as several examples of how the recommendations can be used in practice. The book explores a topic which is of major importance, i.e. the assessment of concrete compressive strength in existing structures. This property (both mean and standard deviation) is a key input in many cases, such as the reinforcement of structures, the safety checking, the extension of service life. As the new RILEM recommendations imply a deep revision (and improvement) of field practice, the book is intended for managers of structures, structural engineers and specialists of NDT that have to answer these issues. More widely, it will benefit engineers and students who are interested in NDT and in the safety analysis of structures.

This book gives information on non destructive techniques for assessment of concrete structures. It synthesizes the best of international knowledge about what techniques can be used for assessing material properties (strength) and structural properties (geometry, defects...). It describes how the techniques can be used so as to answer a series of usual questions, highlighting their capabilities and limits, and providing advices for a better use of techniques. It also focuses on possible combinations of techniques so as to improve the assessment. It is based on many illustrative examples and give in each case references to standards and guidelines.

This book gives information on non destructive techniques for assessment of concrete structures. It synthesizes the best of international knowledge about what techniques can be used for assessing material properties (strength) and structural properties (geometry, defects...). It describes how the techniques can be used so as to answer a series of usual questions, highlighting their capabilities and limits, and providing advices for a better use of techniques. It also focuses on possible combinations of techniques so as to improve the assessment. It is based on many illustrative examples and give in each case references to standards and guidelines.

Civil engineers will value this resource that examines the tools and techniques used to estimate the in-place strength on concrete, permeation properties that relate to potential durability, and the methods used to assess the internal condition of concrete and the corrosion activity of steel reinforcement.

This edited volume contains the best papers in the geo-engineering field accepted for presentation at the 1st Springer Conference of the Arabian Journal of Geosciences, Tunisia 2018. In addition, it includes 3 keynotes by international experts on the following topics: 1. A new three-dimensional rock mass strength criterion 2. New tools and techniques of remote sensing for geologic hazard assessment 3. Land subsidence induced by the engineering-environmental effects in Shanghai China The book is useful for readers who would like to get a broad coverage in geo-engineering. It contains 11 chapters covering the following main areas: (a) Applications in geo-environmental engineering including soil remediation, (b) Characterization of geo-materials using geological, geotechnical and geophysical techniques, (c) Soil improvement applications, (d) Soil behaviour under dynamic loading, (e) Recent studies on expansive soils, (f) Analytical and numerical modelling of various geo-structures, (g) Slope stability, (h) Landslides, (i) Subsidence studies and (j) Recent studies on various other types of geo-hazards.

Concrete floors should be diagnosed in order to obtain the proper durability. Non-destructive testing (NDT) methods, which have numerous advantages and are very effective for in situ testing, are recommended for this purpose. Non-Destructive Diagnostics of Concrete Floors: Methods and Case Studies offers useful NDT methods, test methodologies, and case studies. This book contains classifications of NDT methods, examines their areas of usefulness in floor diagnostics, and explains the complementarity and reliability of NDT methods as well as the need to calibrate research equipment. It presents interesting case studies of concrete floors, such as dowelled floors, floors with a top layer made of stone slabs, industrial floors, industrial floors with a top layer of polyurethane-cement, layered floors, post-tensioned floors, and cement screeds. The authors have drawn on many years of experience in both academia and the practical diagnosis of concrete floors using NDT methods.