Optical And Euv Lithography

Editorial Review Dr. Bakshi has compiled a thorough, clear reference text covering the important fields of EUV lithography for high-volume manufacturing. This book has resulted from his many years of experience in EUVL development and from teaching this subject to future specialists. The book proceeds from an historical perspective of EUV lithography, through source technology, optics, projection system design, mask, resist, and patterning performance, to cost of ownership. Each section contains worked examples, a comprehensive review of challenges, and relevant citations for those who wish to further investigate the subject matter. Dr. Bakshi succeeds in presenting sometimes unfamiliar material in a very clear manner. This book is also valuable as a teaching tool. It has become an instant classic and far surpasses others in the EUVL field. --Dr. Akira Endo, Chief Development Manager, Gigaphoton Inc. Description Extreme ultraviolet lithography (EUVL) is the principal lithography technology aiming to manufacture computer chips beyond the current 193-nm-based optical lithography, and recent progress has been made on several fronts: EUV light sources, optics, optics metrology, contamination control, masks and mask handling, and resists. This comprehensive volume is comprised of contributions from the world's leading EUVL researchers and provides all of the critical information needed by practitioners and those wanting an introduction to the field. Interest in EUVL technology continues to increase, and this volume provides the foundation required for understanding and applying this exciting technology. About the editor of EUV Lithography Dr. Vivek Bakshi previously served as a senior member of the technical staff at SEMATECH; he is now president of EUV Litho, Inc., in Austin, Texas.

This comprehensive volume, edited by a senior technical staff member at SEMATECH, is the authoritative reference book on EUV source technology. The volume contains 38 chapters contributed by leading researchers and suppliers in the EUV source field. Topics range from a state-of-the-art overview and in-depth explanation of EUV source requirements, to fundamental atomic data and theoretical models of EUV sources based on discharge-produced plasmas (DPP) and laser-produced plasmas, to a description of prominent DPP and LPP designs and other technologies for producing EUV radiation. Additional topics include EUV source metrology and components (collectors, electrodes), debris mitigation, and mechanisms of component erosion in EUV sources. The volume is intended to meet the needs of both practitioners of the technology and readers seeking an introduction to the subject.

"Extreme ultraviolet lithography (EUVL) is the principal lithography technology aiming to manufacture computer chips beyond the current 193-nm-based optical lithography, and recent progress has been made on several fronts: EUV light sources, optics, optics metrology, contamination control, masks and mask handling, and resists. This book covers the fundamental and latest status of all aspects of EUVL in field. It thoroughly covers the current in-field version of EUVL plus related topics, including light sources, optics, mask, photoresists, contamination, imaging and scanners. In the nine years since SPIE Press published the first edition of EUVL Lithography, much progress has taken place in the development of EUVL as the choice technology for NGL. In 2008, EUVL was a prime contender to replace 193 nm based optical lithography in leading edge computer chipmaking, but not everyone was convinced at that point. Switching from 193 nm to 13.5 nm wavelengths was a much bigger jump than the industry had attempted before. It brought several difficult challenges in all areas of lithography - light source, scanner, mask, mask handling, optics, optics metrology, resist, computation, materials and optics contamination. These challenges have been effectively resolved, and several leading-edge chipmakers have announced dates, starting in 2018, for inserting EUVL into high-volume manufacturing"--

The fabrication of an integrated circuit requires a variety of physical and chemical processes to be performed on a semiconductor substrate. In general, these processes fall into three categories: film deposition, patterning, and semiconductor doping. Films of both conductors and insulators are used to connect and isolate transistors and their components. By creating structures of these various components millions of transistors can be built and wired together to form the complex circuitry of modern microelectronic devices. Fundamental to all of these processes is lithography, ie, the formation of three-dimensional relief images on the substrate for subsequent transfer of the pattern to the substrate. This book presents a complete theoretical and practical treatment of the topic of lithography for both students and researchers. It comprises ten detailed chapters plus three appendices with problems provided at the end of each chapter. Additional Information: Visiting http://www.lithoguru.com/textbook/index.html enhances the reader's understanding as the website supplies information on how you can download a free laboratory manual, Optical Lithography Modelling with MATLAB®, to accompany the textbook. You can also contact the author and find help for instructors.

This book is written for new and experienced engineers, technology managers, and senior technicians who want to enrich their understanding of the image formation physics of a lithographic system. Readers will gain knowledge of the basic equations and constants that drive optical lithography, learn the basics of exposure systems and image formation, and come away with a full understanding of system components, processing, and optimization. Readers will also get an overview of the outlook of optical lithography and means to enhance semiconductor manufacturing. This second edition blends the author's unique experience in research, teaching, and world-class high-volume manufacturing to add brand new material on proximity printing, as well as updated and expanded material on exposure systems, image formation, E-D methodology, hardware components, processing and optimization, and EUV and immersion lithographies.

Lithography is a field in which advances proceed at a swift pace. This book was written to address several needs, and the revisions for the second edition were made with those original objectives in mind. Many new topics have been included in this text commensurate with the progress that has taken place during the past few years, and several subjects are discussed in more detail. This book is intended to serve as an introduction to the science of microlithography for people who are unfamiliar with the subject. Topics directly related to the tools used to manufacture integrated circuits are addressed in depth, including such topics as overlay, the stages of exposure, tools, and light sources. This text also contains numerous references for students who want to investigate particular topics in more detail, and they provide the experienced lithographer with lists of references by topic as well. It is expected that the reader of this book will have a foundation in basic physics and chemistry. No topics will require knowledge of mathematics beyond elementary calculus.