Order In The Amorphous State Of Polymers

In 1975, a symposium was held in Midland, Michigan, co-sponsored by the Dow Chemical Company and the then Midland Macromolecular Institute in honor of Raymond F. Boyer on the occasion of his 65th birthday and retirement from Dow. The topic of that first Boyer symposium dealt with an area of interest to Boyer, namely, polymer transitions and relaxations. One decade later, after ten years of additional fruitful scientific endeavor at MMI, Ray Boyer was again honored with a symposium, this time celebrating his 75th birthday and 10th anniversary at the Michigan Molecular Institute. The topic of the second Boyer symposium in 1985 was somewhat more focused, this time concentrating on the subject of order (or structure) in the amorphous state of polymers and the attendant polymer transitions that are observed. This volume contains the full manuscripts of the contributors to the 17th MMI International Symposium, held in Midland, Michigan on August 18-21, 1985. Eleven one-hour plenary lectures and ten 20-minute contributed papers were presented during the Symposium. An open forum panel discussion was also scheduled; the edited transcript of that session is included at the end of this volume. One of our tasks in organizing this Symposium was to attempt to gather together a number of speakers who would be able to define what, if any, physical structure might be present in anwrplwus polymers and what the nature of this order might be.

The basic problem of polymer physics is obtaining a ‘structure-propertiesa correlations for their future application for practical purposes. However, these cannot be obtained without the development of a quantitative model of the polymer structure.This problem has been actively investigated during the last 45 years, which resulted in obtaining a

Fundamentals of Polymer Science for Engineers Filling a gap in the market, this textbook provides a concise, yet thorough introduction to polymer science for advanced engineering students and practitioners, focusing on the chemical, physical and materials science aspects that are most relevant for engineering applications. After covering polymer synthesis and properties, the major section of the book is devoted to polymeric materials, such as thermoplastics and polymer composites, polymer processing such as injection molding and extrusion, and methods for large-scale polymer characterization. The text concludes with an overview of engineering plastics. The emphasis throughout is on application-relevant topics, and the author focuses on real-life, industry-relevant polymeric materials.

This volume represents a continuation of the Polymer Science and Technology series edited by Dr. D. M. Brewis and Professor D. Briggs. The theme of the series is the production of a number of stand alone volumes on various areas of polymer science and technology. Each volume contains short articles by a variety of expert contributors outlining a particular topic and these articles are extensively cross referenced. References to related topics included in the volume are indicated by bold text in the articles, the bold text being the title of the relevant article. At the end of each article there is a list of bibliographic references where interested readers can obtain further detailed information on the subject of the article. This volume was produced at the invitation of Derek Brewis who asked me to edit a text which concentrated on the mechanical properties of polymers. There are already many excellent books on the mechanical properties of polymers, and a somewhat lesser number of volumes dealing with methods of carrying out mechanical tests on polymers. Some of these books are listed in Appendix 1. In this volume I have attempted to cover basic mechanical properties and test methods as well as the theory of polymer mechanical deformation and hope that the reader will find the approach useful.

This volume offers a comprehensive guide on the theory and practice of amorphous solid dispersions (ASD) for handling challenges associated with poorly soluble drugs. In twenty-three inclusive chapters, the book examines thermodynamics and kinetics of the amorphous state and amorphous solid dispersions, ASD technologies, excipients for stabilizing amorphous solid dispersions such as polymers, and ASD manufacturing technologies, including spray drying, hot melt extrusion, fluid bed layering and solvent-controlled micro-precipitation technology (MBP). Each technology is illustrated by specific case studies. In addition, dedicated sections cover analytical tools and technologies for characterization of amorphous solid dispersions, the prediction of long-term stability, and the development of suitable dissolution methods and regulatory aspects. The book also highlights future technologies on the horizon, such as supercritical fluid processing, mesoporous silica, KinetiSol®, and the use of non-salt-forming organic acids and amino acids for the stabilization of amorphous systems. Amorphous Solid Dispersions: Theory and Practice is a valuable reference to pharmaceutical scientists interested in developing bioavailable and therapeutically effective formulations of poorly soluble molecules in order to advance these technologies and develop better medicines for the future.

Describes and interrelates the following processes: cooperative alpha processes in a cold liquid, structural relaxation in the glass near Tg, the Johari-Goldstein beta process, the Williams-Götze process in a warm liquid, fast nonactivated cage rattling and boson peak, and ultraslow Fischer modes.