Power Plant Electrical Equipment And Systems Handbook

This is a practical, comprehensive guide for the selection, applications, operation, diagnostic testing, troubleshooting, maintenance, and refurbishment of all types of electrical equipment and systems used in power stations and in other industries.

Maximize your company’s energy output while ensuring the reliability and longevity of your industrial electrical equipment! Everything you need for selection, applications, operations, diagnostic testing, troubleshooting and maintenance for all capital equipment placed firmly in your grasp. Keeping your equipment running efficiently and smoothly could make the difference between profit and loss. Electrical Equipment Handbook: Troubleshooting and Maintenance provides you with the state-of–the-art information for achieving the highest performance from your transformers, motors, speed drives, generator, rectifiers, and inverters. With this book in hand you'll understand various diagnostic testing methods and inspection techniques as well as advance fault detection techniques critical components and common failure modes. This handbook will answer all your questions about industrial electrical equipment. In Electrical Equipment Handbook: Troubleshooting and Maintenance, you will: Learn about the various types of transformers, motors, variable speed drives, generators, rectifiers, inverters, and uninterrupted power systems. Understand diagnostic testing and inspection, advanced fault detection techniques, critical components, and common failure modes. Study selection criteria, commissioning requirements, predictive and preventive maintenance, reliability, testing and cost discover the maintenance required to minimize their operating cost and maximize their efficiency, reliability and longevity.

Extensively revised and updated, this new edition of a classic resource provides powerplant engineers with a full range of information from basic operations to leading-edge technologies, including steam generation, turbines and diesels, fuels and fuel handling, pollution control, plant electrical systems, and instrumentation and control. New material covers various energy resources for power generation, nuclear plant systems, hydroelectric power stations, alternative and cogeneration energy plants, and environmental controls. With over 600 drawings, diagrams, and photographs, it offers engineers and technicians the information needed to keep powerplants operating smoothly into the 21st century.

The Electric Power Engineering Handbook, Third Edition updates coverage of recent developments and rapid technological growth in crucial aspects of power systems, including protection, dynamics and stability, operation, and control. With contributions from worldwide field leaders—edited by L.L. Grigsby, one of the world’s most respected, accomplished authorities in power engineering—this reference includes chapters on: Nonconventional Power Generation Conventional Power Generation Transmission Systems Distribution Systems Electric Power Utilization Power Quality Power System Analysis and Simulation Power System Transients Power System Planning (Reliability) Power Electronics Power System Protection Power System Dynamics and Stability Power System Operation and Control Content includes a simplified overview of advances in international standards, practices, and technologies, such as small-signal stability and power system oscillations, power system stability controls, and dynamic modeling of power systems. Each book in this popular series supplies a high level of detail and, more importantly, a tutorial style of writing and use of photographs and graphics to help the reader understand the material. This resource will help readers achieve safe, economical, high-quality power delivery in a dynamic and demanding environment. Volumes in the set: K12642 Electric Power Generation, Transmission, and Distribution, Third Edition (ISBN: 9781439856284) K12648 Power Systems, Third Edition (ISBN: 9781439856338) K13917 Power System Stability and Control, Third Edition (9781439883204) K12650 Electric Power Substations Engineering, Third Edition (9781439856383) K12643 Electric Power Transformer Engineering, Third Edition (9781439856291)

We’ve all lived through long hot summers with power shortages, brownouts, and blackouts. But at last, all the what-to-do and how-to-do it information you’ll need to handle a full range of operation and maintenance tasks at your fingertips. Written by a power industry expert, Power Generation Handbook: Selection, Applications, Operation, Maintenance helps you to gain a thorough understanding of all components, calculations, and subsystems of the various types of gas turbines, steam power plants, co-generation, and combined cycle plants. Divided into five sections, Power Generation Handbook: Selection, Applications, Operation, Maintenance provides a thorough understanding of co-generation and combined cycle plants. Each of the components such as compressors, gas and steam turbines, heat recovery steam generators, condensers, lubricating systems, transformers, and generators are covered in detail. The selection considerations, operation, maintenance and economics of co-generation plants and combined cycles as well as emission limits, monitoring and governing systems will also be covered thoroughly. This all-in-one resource gives you step-by-step guidance on how to maximize the efficiency, reliability and longevity of your power generation plant.

The book discusses instrumentation and control in modern fossil fuel power plants, with an emphasis on selecting the most appropriate systems subject to constraints engineers have for their projects. It provides all the plant process and design details, including specification sheets and standards currently followed in the plant. Among the unique features of the book are the inclusion of control loop strategies and BMS/FSSS step by step logic, coverage of analytical instruments and technologies for pollution and energy savings, and coverage of the trends toward filed bus systems and integration of subsystems into one network with the help of embedded controllers and OPC interfaces. The book includes comprehensive listings of operating values and ranges of parameters for temperature, pressure, flow, level, etc of a typical 250/500 MW thermal power plant. Appropriate for project engineers as well as instrumentation/control engineers, the book also includes tables, charts, and figures from real-life projects around the world. Covers systems in use in a wide range of power plants: conventional thermal power plants, combined/cogen plants, supercritical plants, and once through boilers Presents practical design aspects and current trends in instrumentation Discusses why and how to change control strategies when systems are updated/changed Provides instrumentation selection techniques based on operating parameters. Spec sheets are included for each type of instrument. Consistent with current professional practice in North America, Europe, and India

Practical Power Plant Engineering offers engineers, new to the profession, a guide to the methods of practical design, equipment selection and operation of power and heavy industrial plants as practiced by experienced engineers. The author—a noted expert on the topic—draws on decades of practical experience working in a number of industries with ever-changing technologies. This comprehensive book, written in 26 chapters, covers the electrical activities from plant design, development to commissioning. It is filled with descriptive examples, brief equipment data sheets, relay protection, engineering calculations, illustrations, and common-sense engineering approaches. The book explores the most relevant topics and reviews the industry standards and established engineering practices. For example, the author leads the reader through the application of MV switchgear, MV controllers, MCCs and distribution lines in building plant power distribution systems, including calculations of interrupting duty for breakers and contactors. The text also contains useful information on the various types of concentrated and photovoltaic solar plants as well as wind farms with DFIG turbines. This important book: • Explains why and how to select the proper ratings for electrical equipment for specific applications • Includes information on the critical requirements for designing power systems to meet the performance requirements • Presents tests of the electrical equipment that prove it is built to the required standards and will meet plant-specific operating requirements Written for both professional engineers early in their career and experienced engineers, Practical Power Plant Engineering is a must-have resource that offers the information needed to apply the concepts of power plant engineering in the real world.