Proceedings Of The 4th International Seminar On Non Ideal Compressible Fluid Dynamics For Propulsion And Power

This book collects the main contributions from the 4th edition of the NICFD conference, organized by the Special Interest Group on Non-Ideal Compressible Fluid Dynamics (SIG- 49). It provides some of the latest research findings in the field of NICFD, relevant to a number of engineering applications related to the conversion of renewable and waste energy sources, like, e.g., organic Rankine cycles, super-critical CO2 cycle power plants, combustors operating with supercritical fluids, and heat pumps. The book reports on research encompassing theoretical, computational, and experimental aspects of the gas-dynamics of non-ideal reactive and non-reactive flows and their impact for the design of internal-flow components (turbomachinery, heat exchangers, combustors). All chapters address challenges related to characterizing the behaviour of non-ideal fluids, where state-of-the-art models are used to predict the thermo-physical properties of both pure and multi-phase fluids.

This book contains a collection of the main contributions from the third edition of the NICFD conference, organized by the Special Interest Group on Non-Ideal Compressible Fluid Dynamics (SIG-49). It provides insight on the latest research findings in the field of NICFD that are relevant to a number of engineering applications related to the conversion of renewable and waste energy sources, like organic Rankine cycles, supercritical CO2 cycle power plants, combustors operating with supercritical fluids, and heat pumps. The various chapters of the book document research encompassing theoretical, computational, and experimental aspects of the gas dynamics of non-ideal reactive and non-reactive flows and their impact for the design of internal flow components (turbomachinery, heat exchangers, combustors). Since the accurate calculation of fluid thermo-physical properties is of great concern in NICFD, all the chapters address this problem by describing state-of-the-art models for the characterization of the properties of pure fluids and mixtures.

This book reports on advanced theories and methods aimed at characterizing the dynamics of non-ideal compressible fluids. A special emphasis is given to research fostering the use of non-ideal compressible fluids for propulsion and power engineering. Both numerical and experimental studies, as well as simulations, are described in the book, which is based on selected contributions and keynote lectures presented at the 2nd International Seminar on Non-Ideal Compressible-Fluid Dynamics for Propulsion & Power. Held on October 4-5 in Bochum, Germany, the seminar aimed at fostering collaborations between academics and professionals. The two perspectives have been gathered together in this book, which offers a timely guide to advanced fundamentals, innovative methods and current applications of non-ideal compressible fluids to developing turbomachines, and for propulsion and power generation.

This book reports on advanced theories and methods aimed at characterizing the dynamics of non-ideal compressible fluids. A special emphasis is given to research fostering the use of non-ideal compressible fluids for propulsion and power engineering. Both numerical and experimental studies, as well as simulations, are described in the book, which is based on selected contributions and keynote lectures presented at the 2nd International Seminar on Non-Ideal Compressible-Fluid Dynamics for Propulsion & Power. Held on October 4-5 in Bochum, Germany, the seminar aimed at fostering collaborations between academics and professionals. The two perspectives have been gathered together in this book, which offers a timely guide to advanced fundamentals, innovative methods and current applications of non-ideal compressible fluids to developing turbomachines, and for propulsion and power generation.

To protect the Earth, China has launched its target of peaking carbon dioxide emissions by 2030, and achieving carbon neutrality by 2060 , which greatly encourages the use and development of renewable energy. Supercritical CO2 power cycle is a promising technology and the radial inflow turbine is the most important component of it, whose design and optimisation are considered as great challenges. This book introduces simulation tools and methods for supercritical CO2 radial inflow turbine, including a high fidelity quasi-one-dimensional design procedure, a non-ideal compressible fluid dynamics Riemann solver within open-source CFD software OpenFOAM framework, and a multi-objective Nelder–Mead geometry optimiser. Enhanced one-dimensional loss models are presented for providing a new insight towards the preliminary design of the supercritical CO2 radial inflow turbine. Since the flow phenomena within the blade channels are complex, involving fluid flow, shock wave transmission and boundary layer separation, only employing the ideal gas model is inadequate to predict the performance of the turbine. Thus, a non-ideal compressible fluid dynamics Riemann solver based on OpenFOAM library is developed. This book addresses the issues related to the turbine design and blade optimization and provides leading techniques. Hence, this book is of great value for the readers working on the supercritical CO2 radial inflow turbine and understanding the knowledge of CFD and turbomachinery.

The International Conference on Computational Fluid Dynamics (ICCFD) is the merger of the International Conference on Numerical Methods in Fluid Dynamics, ICNMFD (since 1969) and International Symposium on Computational Fluid Dynamics, ISCFD (since 1985). It is held every two years and brings together physicists, mathematicians and engineers to review and share recent advances in mathematical and computational techniques for modeling fluid dynamics. The proceedings of the 2006 conference (ICCFD4) held in Gent, Belgium, contain a selection of refereed contributions and are meant to serve as a source of reference for all those interested in the state of the art in computational fluid mechanics.

The International Conference on Computational Fluid Dynamics is held every two years and brings together physicists, mathematicians and engineers to review and share recent advances in mathematical and computational techniques for modeling fluid flow. The proceedings of the 2010 conference (ICCFD6) held in St Petersburg, Russia, contain a selection of refereed contributions and are meant to serve as a source of reference for all those interested in the state of the art in computational fluid dynamics.

This volume comprises the proceedings of the 42nd National and 5th International Conference on Fluid Mechanics and Fluid Power held at IIT Kanpur in December, 2014.The conference proceedings encapsulate the best deliberations held during the conference. The diversity of participation in the conference, from academia, industry and research laboratories reflects in the articles appearing in the volume. This contributed volume has articles from authors who have participated in the conference on thematic areas such as Fundamental Issues and Perspectives in Fluid Mechanics; Measurement Techniques and Instrumentation; Computational Fluid Dynamics; Instability, Transition and Turbulence; Turbomachinery; Multiphase Flows; Fluid‐Structure Interaction and Flow‐Induced Noise; Microfluidics; Bio‐inspired Fluid Mechanics; Internal Combustion Engines and Gas Turbines; and Specialized Topics. The contents of this volume will prove useful to researchers from industry and academia alike.