Properties And Application Of Zeolitized Fly Ash

This book presents a thorough review of the state-of-knowledge and recent innovations in the synthesis of pure and improved grades of fly ash zeolites (FAZ). Addressing improvements to conventional methods, it also showcases a novel technique for the synthesis of high cation exchangers from fly ash and detailed characterization techniques for the products obtained. In addition, it examines in detail various areas of specific applications of fly ash zeolites. Over the years, several methods such as hydrothermal, fusion prior to hydrothermal, microwave assisted hydrothermal and molten salt techniques for producing FAZ have been developed. However, one-step and two-step reactions between the fly ash and alkali usually generate alkaline wastes that may cause environmental contamination. In addition, the separation of FAZ from the partially activated fly ash (the impurities) remains a major concern for researchers and industrialists alike. /divIn view of these challenges, this book presents a novel technique for three-step activation (TSA), which focuses on recycling the fly ash-NaOH-water reaction by-products until zeolitic residue is formed. The FAZ (the final residue after third step reactions) synthesized in this manner exhibits exceptionally high cation exchange capacity, specific surface area and pore area. This book offers a comprehensive compendium of reading material on fly ash and its recycled product, the zeolites. Students at both undergraduate and graduate levels, researchers, and practicing engineers will all find this book to be a valuable guide in their respective fields.

This book draws together a large quantity of research that has been carried out on pulverised fuel ash (PFA) over the past 30 years.In addition to covering the potential uses of PFA it provides an overview of the benefits of use.

"Due to rising energy demand, the amount of coal utilization is escalating at a fast rate, leading to a rise in ash generation. Coal Fly Ash: Properties, Applications and Performance begins by presenting a study wherein the physiochemical properties of coal ash were analysed and based on that, their potential for reuse was identified. Next, the synergy between Portland cement and coal fly ash was investigated. Raw materials were characterized in terms of chemical and mineralogical composition and physical properties. Mortars were manufactured and the effect of the addition of different ratios of coal fly ash (0-80 wt %) as a partial substitute of Portland cement was studied. Following this, an investigation was carried out to explore the behaviour of coal ash with hydrated lime as mineral filler in hot mix asphalt, in an attempt to determine a sustainable solution for the management of coal ash in Mauritius. The closing chapter describes the synthesis process used to obtain zeolite Na-A from coal fly ash via fusion with NaOH followed by hydrothermal reaction. Coal fly ash is a low cost source of both silica and alumina. The molar ratio of SiO2/Al2O3 for zeolite 4A formation was achieved through the addition of sodium aluminate solution/aluminum waste as aluminum sources"--

This book is a state-of-the-art report which documents current knowledge on the properties of fly ash in concrete and the use of fly ash in construction. It includes RILEM Recommendations on fly ash in concrete and a comprehensive bibliography including over 800 references.

Nanoporous Materials for Molecule Separation and Conversion cover the topic with sections on nanoporous material synthesis and characterization, nanoporous materials for molecule separation, and nanoporous materials for energy storage and renewable energy. Typical nanoporous materials including carbon, zeolite, silica and metal-organic frameworks and their applications in molecule separation and energy related applications are covered. In addition, the fundamentals of molecule adsorption and molecule transport in nanoporous materials are also included, providing readers with a stronger understanding of the principles and topics covered. This is an important reference for anyone exploring nanoporous materials, including researchers and postgraduate students in materials science and chemical engineering. In addition, it is ideal for industry professionals working on a wide range of applications for nanoporous materials. Outlines the fundamental principles of nanoporous materials design Explores the application of nanoporous materials in important areas such as molecule separation and energy storage Gives real-life examples of how nanoporous materials are used in a variety of industry sector

This book discusses different aspects of energy consumption and environmental pollution, describing in detail the various pollutants resulting from the utilization of natural resources and their control techniques. It discusses diagnostic techniques in a simple and easy-to-understand manner. It will be useful for engineers, agriculturists, environmentalists, ecologists and policy makers involved in area of pollutants from energy, environmental safety, and health sectors.