Pspice For Circuit Theory And Electronic Devices

PSpice for Circuit Theory and Electronic Devices is one of a series of five PSpice books and introduces the latest Cadence Orcad PSpice version 10.5 by simulating a range of DC and AC exercises. It is aimed primarily at those wishing to get up to speed with this version but will be of use to high school students, undergraduate students, and of course, lecturers. Circuit theorems are applied to a range of circuits and the calculations by hand after analysis are then compared to the simulated results. The Laplace transform and the s-plane are used to analyze CR and LR circuits where transient signals are involved. Here, the Probe output graphs demonstrate what a great learning tool PSpice is by providing the reader with a visual verification of any theoretical calculations. Series and parallel-tuned resonant circuits are investigated where the difficult concepts of dynamic impedance and selectivity are best understood by sweeping different circuit parameters through a range of values. Obtaining semiconductor device characteristics as a laboratory exercise has fallen out of favour of late, but nevertheless, is still a useful exercise for understanding or modelling semiconductor devices. Inverting and non-inverting operational amplifiers characteristics such as gain-bandwidth are investigated and we will see the dependency of bandwidth on the gain using the performance analysis facility. Power amplifiers are examined where PSpice/Probe demonstrates very nicely the problems of cross-over distortion and other problems associated with power transistors. We examine power supplies and the problems of regulation, ground bounce, and power factor correction. Lastly, we look at MOSFET device characteristics and show how these devices are used to form basic CMOS logic gates such as NAND and NOR gates.

Provides practical examples of circuit design and analysis using PSpice, MATLAB, and the Smith Chart This book presents the three technologies used to deal with electronic circuits: MATLAB, PSpice, and Smith chart. It gives students, researchers, and practicing engineers the necessary design and modelling tools for validating electronic design concepts involving bipolar junction transistors (BJTs), field-effect transistors (FET), OP Amp circuits, and analog filters. Electronic Circuits with MATLAB®, PSpice®, and Smith Chart presents analytical solutions with the results of MATLAB analysis and PSpice simulation. This gives the reader information about the state of the art and confidence in the legitimacy of the solution, as long as the solutions obtained by using the two software tools agree with each other. For representative examples of impedance matching and filter design, the solution using MATLAB and Smith chart (Smith V4.1) are presented for comparison and crosscheck. This approach is expected to give the reader confidence in, and a deeper understanding of, the solution. In addition, this text: Increases the reader's understanding of the underlying processes and related equations for the design and analysis of circuits Provides a stepping stone to RF (radio frequency) circuit design by demonstrating how MATLAB can be used for the design and implementation of microstrip filters Features two chapters dedicated to the application of Smith charts and two-port network theory Electronic Circuits with MATLAB®, PSpice®, and Smith Chart will be of great benefit to practicing engineers and graduate students interested in circuit theory and RF circuits.

This laboratory manual for students of Electronics, Electrical, Instrumentation, Communication, and Computer engineering disciplines has been prepared in the form of a standalone text, offering the necessary theory and circuit diagrams with each experiment. Procedures for setting up the circuits and measuring and evaluating their performance are designed to support the material of the authors' book Analog Electronics (also published by PHI Learning). There are twenty-five experiments. The experiments cover the basic transistor circuits, the linear op-amp circuits, the active filters, the non-linear op-amp circuits, the signal generators, the voltage regulators, the power amplifiers, the high frequency amplifiers, and the data converters. In addition to the hands-on experiments using traditional test equipment and components, this manual describes the simulation of circuits using PSPICE as well. For PSPICE simulation, any available standard SPICE software may be used including the latest version OrCAD V10 Demo software. This feature allows the instructor to adopt a single laboratory manual for both types of experiments.

For upper-level courses in devices and circuits, at 2-year or 4-year engineering and technology institutes. Highly accurate and thoroughly updated, this text has set the standard in electronic devices and circuit theory for over 25 years. Boylestad offers students a complete and comprehensive survey, focusing on all the essentials they will need to succeed on the job. This very readable presentation is supported by strong pedagogy and content that is ideal for new students of this rapidly changing field. Its colorful, student-friendly layout boasts a large number of stunning photographs. A broad range of ancillary materials is available for instructor support. *NEW -Over 40 new end-of-chapter practical examples added throughout - Provides an understanding of the design process not normally available at this level. This helps students apply content to real-world situations and makes material more meaningful. *NEW - Expanded coverage of computer software - Adds coverage of Mathcad to illustrate the versatility of the package for use in electronics - keeping students up to date on a rapidly changing part of the field. *NEW - Summaries added to the end of every chapter - Uses boldface

Electronics: Basic, Analog, and Digital with PSpice does more than just make unsubstantiated assertions about electronics. Compared to most current textbooks on the subject, it pays significantly more attention to essential basic electronics and the underlying theory of semiconductors. In discussing electrical conduction in semiconductors, the author addresses the important but often ignored fundamental and unifying concept of electrochemical potential of current carriers, which is also an instructive link between semiconductor and ionic systems at a time when electrical engineering students are increasingly being exposed to biological systems. The text presents the background and tools necessary for at least a qualitative understanding of new and projected advances in microelectronics. The author provides helpful PSpice simulations and associated procedures (based on schematic capture, and using OrCAD® 16.0 Demo software), which are available for download. These simulations are explained in considerable detail and integrated throughout the book. The book also includes practical, real-world examples, problems, and other supplementary material, which helps to demystify concepts and relations that many books usually state as facts without offering at least some plausible explanation. With its focus on fundamental physical concepts and thorough exploration of the behavior of semiconductors, this book enables readers to better understand how electronic devices function and how they are used. The book’s foreword briefly reviews the history of electronics and its impact in today’s world. ***Classroom Presentations are provided on the CRC Press website. Their inclusion eliminates the need for instructors to prepare lecture notes. The files can be modified as may be desired, projected in the classroom or lecture hall, and used as a basis for discussing the course material.***

This book is aimed at advanced students and practising engineers. It provides step by step instructions in the use of MicroSim PSpice, industry-standard software that simulates power-electronics circuits. Computer-aided simulation is recognised as the most efficient method of power electronics circuit performance analysis, and is widely used in the industrial marketplace. This book presents a clear and concise guide to one of the most popular software packages. The theory is backed up by drills and exercises throughout, building up practical experience in MicroSim PSpice. The book is intended for use alongside a PC, and a free evaluation version of MicroSim PSpice will be supplied on application to Microsim Corporation. Alternatively, the author's site on the Internet can be accessed at the Internet and the software can be downloaded along with free circuit files, library files and zipped solutions to exercises.