Radar Cross Section Reduction

This book discusses the active and passive radar cross section (RCS) estimation and techniques to examine the low observable aerospace platforms. It begins with the fundamentals of RCS, followed by the dielectric, magnetic and metamaterials parameters of the constituent materials and then explains various methods and the emerging trends followed in this area of study. The RCS estimation of phased array including the mutual coupling effect is also presented in detail in the book. The active RCS reduction is carefully touched upon through the performance of phased arrays, sidelobe cancellers and mitigation of multipath effect. Providing information on various adaptive algorithms like least mean square (LMS), recursive least square (RLS) and weighted least square algorithms, the authors also mention the recent developments in the area of embedded antennas, conformal load bearing antenna, metamaterials and frequency selective surface (FSS) based RCS reduction.

The leading text and reference on radar cross section (RCS) theory and applications, this work presents a comparison of two radar signal strengths. One is the strength of the radar bean sweeping over a target, the other is the strength of the reflected echo senses by the receiver. This book shows how the RCS "gauge" can be predicted for theoretical objects.

This book presents a comprehensive review of plasma-based stealth, covering the basics, methods, parametric analysis, and challenges towards the realization of the idea. The concealment of aircraft from radar sources, or stealth, is achieved through shaping, radar absorbing coatings, engineered materials, or plasma, etc. Plasma-based stealth is a radar cross section (RCS) reduction technique associated with the reflection and absorption of incident electromagnetic (EM) waves by the plasma layer surrounding the structure. A plasma cloud covering the aircraft may give rise to other signatures such as thermal, acoustic, infrared, or visual. Thus it is a matter of concern that the RCS reduction by plasma enhances its detectability due to other signatures. This needs a careful approach towards the plasma generation and its EM wave interaction. The book starts with the basics of EM wave interactions with plasma, briefly discuss the methods used to analyze the propagation characteristics of plasma, and its generation. It presents the parametric analysis of propagation behaviour of plasma, and the challenges in the implementation of plasma-based stealth technology. This review serves as a starting point for the graduate and research students, scientists and engineers working in the area of low-observables and stealth technology.

This reference describes techniques for controlling the RCS of targets, provides analytical methods for estimating RCS, develops models for the design of low RCS targets and antennas, and discusses several RCS enhancement techniques.

The objective of this thesis is to investigate and evaluate the effectiveness of radar cross section (RCS) reduction by means of the geometric control of discontinuities using serrated edges. Although the use of serrated edges for RCS reduction can be clearly seen on stealth aircraft such as the Northrop B-2, and was mentioned in several papers and references, not much data on the reduction magnitude, the associated geometry, or the design methodology are available in the open literature. Parameters of interest include the number of basic serration cells (triangles) required per wavelength, and the aspect ratio of the triangles that form the zig zags. An infinitely thin metallic plate is considered for the analysis. The RCS of such a plate with serrated edges is computed and compared against the RCS of a plate of the same sized without serrated edges. The infinitely thin assumption is valid if the wing of the aircraft, which is represented by the plate, is thin compared to the wavelength. The results obtained show significant reduction in RCS.

The original campus of the University of Michigan was nearly a perfect square about a half-mile along a side. A street-sized walk, appropriately called the Diag, runs diagonally across this square, connecting its southeast and northwest corners. In 1904 a new engineering building was either started or finished (I do not remember which) to house classrooms. When another engineering building was built on the expanded campus across the street from it many years later, the old building came to be known as West Engine, to distinguish it from the new East Engine. Old West Engine is (or maybe by now, was) a four-story, L-shaped structure that stood at the southeast corner of the original campus. It was built with an arch in it to straddle the Diag at the apex of the L. You walked over the Engineering Arch to get from one leg of the L to the other if you were inside the building, and you walked under it when you entered the campus from the southeast corner. Affixed to the masonry wall of the arch was a plaque I often noted in passing. It bore a quote attributed to Horace Greeley (1811-1872), who I did not know at the time was the founder, editor, and publisher of the New York Tribune. It said, simply, Young man, when theory and practice differ, use your horse sense. The suggestion seems worthy of an exclamation point instead of a period, but I do not remember if it had one.

There have been many new developments in the ten years since the first edition of Radar and Laser Cross Section Engineering was published. Stealth technology is now an important consideration in the design of all types of platforms. The second edition includes a more extensive introduction that covers the important aspects of stealth technology and the unique tradeoffs involved in stealth design. Prediction, reduction, and measurement of electromagnetic scattering from complex three-dimensional targets remains the primary emphasis of this text, developed by the author from courses taught at the Naval Postgraduate School. New topics on computational methods like the finite element method and the finite integration technique are covered, as well as new areas in the application of radar absorbing material and artificial metamaterials. Matlab [registered] software, homework problems, and a solution manual (available to instructors) supplement the text. Written as an instructional text, this book is recommended for upper-level undergraduate and graduate students. introduction to the physics and mathematics of radar cross section in order to better understand the interdisciplinary aspects of stealth. Matlab is a registered trademark of The MathWorks, Inc.

Measurement is a multidisciplinary experimental science. Measurement systems synergistically blend science, engineering and statistical methods to provide fundamental data for research, design and development, control of processes and operations, and facilitate safe and economic performance of systems. In recent years, measuring techniques have expanded rapidly and gained maturity, through extensive research activities and hardware advancements. With individual chapters authored by eminent professionals in their respective topics, Applied Measurement Systems attempts to provide a comprehensive presentation and in-depth guidance on some of the key applied and advanced topics in measurements for scientists, engineers and educators.