Radio Frequency System Architecture And Design

Communication devices such as smart phones, GPS systems, and Bluetooth, are now part of our daily lives more than ever before. As our communication equipment becomes more sophisticated, so do the radios and other hardware required to enable that technology. Common radio architectures are required to make this technology work seamlessly. This resource describes practical aspects of radio frequency communications systems design, bridging the gap between system-level design considerations and circuit-level design specifications. Industry experts not only provide detailed calculations and theory to determine block level specifications, but also discuss basic theory and operational concepts. This resource also includes extensive, up-to-date application examples.

This book is for RF Engineers and, in particular, those engineers focusing mostly on RF systems and RFIC design. The author develops systematic methods for RF systems design, complete with a comprehensive set of design formulas. Its focus on mobile station transmitter and receiver system design also applies to transceiver design of other wireless systems such as WLAN. This comprehensive reference work covers a wide range of topics from general principles of communication theory, as it applies to digital radio designs to specific examples on implementing multimode mobile systems.

This newly revised and expanded edition of the 2003 Artech House classic, Radio Frequency Integrated Circuit Design, serves as an up-to-date, practical reference for complete RFIC know-how. The second edition includes numerous updates, including greater coverage of CMOS PA design, RFIC design with on-chip components, and more worked examples with simulation results. By emphasizing working designs, this book practically transports you into the authors' own RFIC lab so you can fully understand the function of each design detailed in this book. Among the RFIC designs examined are RF integrated LC-based filters, VCO automatic amplitude control loops, and fully integrated transformer-based circuits, as well as image reject mixers and power amplifiers. If you are new to RFIC design, you can benefit from the introduction to basic theory so you can quickly come up to speed on how RFICs perform and work together in a communications device. A thorough examination of RFIC technology guides you in knowing when RFICs are the right choice for designing a communication device. This leading-edge resource is packed with over 1,000 equations and more than 435 illustrations that support key topics.

The ultimate practical resource for today's RF system design professionals Radio frequency components and circuits form the backbone of today's mobile and satellite communications networks. Consequently, both practicing and aspiring industry professionals need to be able to solve ever more complex problems of RF design. Blending theoretical rigor with a wealth of practical expertise, Practical RF System Design addresses a variety of complex, real-world problems that system engineers are likely to encounter in today's burgeoning communications industry with solutions that are not easily available in the existing literature. The author, an expert in the field of RF module and system design, provides powerful techniques for analyzing real RF systems, with emphasis on some that are currently not well understood. Combining theoretical results and models with examples, he challenges readers to address such practical issues as: * How standing wave ratio affects system gain * How noise on a local oscillator will affect receiver noise figure and desensitization * How to determine the dynamic range of a cascade from module specifications * How phase noise affects system performance and where it comes from * How intermodulation products (IMs) predictably change with signal amplitude, and why they sometimes change differently An essential resource for today's RF system engineers, the text covers important topics in the areas of system noise and nonlinearity, frequency conversion, and phase noise. Along with a wealth of practical examples using MATLAB(r) and Excel, spreadsheets are available for download from an FTP Web site to help readers apply the methods outlined in this important resource.

Wireless Receiver Architectures and Design presents the various designs and architectures of wireless receivers in the context of modern multi-mode and multi-standard devices. This one-stop reference and guide to designing low-cost low-power multi-mode, multi-standard receivers treats analog and digital signal processing simultaneously, with equal detail given to the chosen architecture and modulating waveform. It provides a complete understanding of the receiver‘s analog front end and the digital backend, and how each affects the other. The book explains the design process in great detail, starting from an analysis of requirements to the choice of architecture and finally to the design and algorithm development. The advantages and disadvantages of each wireless architecture and the suitability to a standard are given, enabling a better choice of design methodology, receiver lineup, analog block, and digital algorithm for a particular architecture. Whether you are a communications engineer working in system architecture and waveform design, an RF engineer working on noise and linearity budget and line-up analysis, a DSP engineer working on algorithm development, or an analog or digital design engineer designing circuits for wireless transceivers, this book is your one-stop reference and guide to designing low-cost low-power multi-mode multi-standard receivers. The material in this book is organized and presented to lead you from applied theory to practical design with plenty of examples and case studies drawn from modern wireless standards. Provides a complete description of receiver architectures together with their pros and cons, enabling a better choice of design methodology Covers the design trade-offs and algorithms between the analog front end and the digital modem – enabling an end-to-end design approach Addresses multi-mode multi-standard low-cost, low-power radio design – critical for producing the applications for Smart phones and portable internet devices

The fundamental methods of radio frequency design using mathematics to develop intuition for RF circuits and systems are explained here with an emphasis on applications of simple circuit models. The book prepares readers to actually design HF, VHF and UHF equipment.

A fully comprehensive reference combining digital communications and RFIC (Radio Frequency Integrated Circuits) in one complete volume There are many books which focus on the physical implementation of the RF/analog part of transceivers, such as the CMOS design, or the signal processing involved in digital communications. However, there is little material dedicated to transceiver architecture and system design. Similarly, much of the existing literature looks at concepts useful for dimensioning, yet offers little practical information on how to proceed for dimensioning a line-up from scratch, and on the reasons for proceeding that way. This book redresses the balance by explaining the architecture of transceivers and their dimensioning from the perspective of a RFIC architect from within industry. It bridges the gap between digital communication systems and radiofrequency integrated circuit design, covering wireless transceiver architecture and system design from both system level and circuit designer aspects. • Covers digital communication theory, electromagnetism theory and wireless networks organization, from theories to implementation, for deriving the minimum set of constraints to be fulfilled by transceivers • Details the limitations in the physical implementation of transceivers to be considered for their dimensioning, in terms of noise, nonlinearity, and RF impairments • Presents transceiver architecture and system design in terms of transceivers budgets, transceivers architectures, and algorithms for transceivers

A fully comprehensive reference combining digital communications and RFIC (Radio Frequency Integrated Circuits) in one complete volume There are many books which focus on the physical implementation of the RF/analog part of transceivers, such as the CMOS design, or the signal processing involved in digital communications. However, there is little material dedicated to transceiver architecture and system design. Similarly, much of the existing literature looks at concepts useful for dimensioning, yet offers little practical information on how to proceed for dimensioning a line-up from scratch, and on the reasons for proceeding that way. This book redresses the balance by explaining the architecture of transceivers and their dimensioning from the perspective of a RFIC architect from within industry. It bridges the gap between digital communication systems and radiofrequency integrated circuit design, covering wireless transceiver architecture and system design from both system level and circuit designer aspects. • Covers digital communication theory, electromagnetism theory and wireless networks organization, from theories to implementation, for deriving the minimum set of constraints to be fulfilled by transceivers • Details the limitations in the physical implementation of transceivers to be considered for their dimensioning, in terms of noise, nonlinearity, and RF impairments • Presents transceiver architecture and system design in terms of transceivers budgets, transceivers architectures, and algorithms for transceivers.