Reverse Osmosis Treatment To Remove Inorganic Contaminants From Drinking Water

Provides a literature review of the current state of knowledge in the area of inorganic chemical removal from drinking water. The review considers inorganic chemical parameters that include arsenic, barium, boron, cadmium, chloride, chromium, copper, cyanide, fluoride, iron, lead, manganese, mercury, nitrate, selenium, sodium, sulphide, total dissolved solids, uranium, and zinc. Sources of inorganic chemicals include industrial and municipal effluent, agricultural runoff, and natural sources. Both conventional and advance treatment processes are noted to give an idea of how each contaminant could be removed. These processes include coagulation, softening, filtration, oxidation, adsorption, ion exchange, distillation, membrane processes, aeration, and dilution.

Reverse Osmosis Treatment of Drinking Water discusses the use of reverse osmosis in the treatment of drinking water, as well as the applications of reverse osmosis on industrial and municipal wastewater. The book covers topics such as the general principles of reverse osmosis; the removal of inorganic wastes, organic wastes, and microorganisms by reverse osmosis; the membranes of the reverse osmosis system, and its cleaning and maintenance. The book also includes topics such as the pretreatment for reverse osmosis installations; the approval criteria of regulatory agencies for reverse osmosis installations; and future possible developments in the use of reverse osmosis treatment. The text is recommended for those in water treatments who would like to know more about the processes involved in reverse osmosis treatment.

Part of Metals and Related Substances in Drinking Water Set - buy all five books together to save over 30%! The EU Drinking Water Directive sets a range of standards for metals and related substances in drinking water, many of which are concerned with health protection. A number of these standards are very stringent and require compliance to be assessed at the point of use. Because of the difficulties associated with monitoring, historic practices in many countries have concentrated on the quality of water within the distribution network. As a result, the magnitude of problems with some metals and related substances in drinking water is not fully appreciated in all European countries, and the extent and nature of corrective actions differ widely. This Best Practice Guide on Metals Removal From Drinking Water By Treatment describes drinking water standards and regulations, and explains the impact of a range of water treatment processes on metal levels in drinking water. Its objectives are to provide a basis for assessing the extent of problems and to identify appropriate water treatment options. The Guide provides a reasoned guide to selection of key water treatment processes. Each chapter focuses on a specific water treatment process and has been written by experts in that particular process. Best Practice Guide on Metals Removal From Drinking Water By Treatment provides practice-based knowledge for water engineers and scientists in large and small water utilities, regulatory agencies, health agencies and local municipalities (from cities through to small rural communities). It also supports university level teaching in degree schemes that relate to water management. This Guide is one of a series produced by the International Water Association’s Specialist Group on Metals and Related Substances in Drinking Water. The series is an up-to-date compilation of a range of scientific, engineering, regulatory and operational issues concerned with the control and removal of metals from drinking water.

This book discusses drinking water treatment technologies that address contaminants and contaminant categories regulated under the Safe Drinking Water Act and its 1986 amendments. It covers both established and emerging technologies needed to comply with the new regulations of 1986 amendment.