Robot Force Control

One of the fundamental requirements for the success of a robot task is the capability to handle interaction between manipulator and environment. The quantity that describes the state of interaction more effectively is the contact force at the manipulator's end effector. High values of contact force are generally undesirable since they may stress both the manipulator and the manipulated object; hence the need to seek for effective force control strategies. The book provides a theoretical and experimental treatment of robot interaction control. In the framework of model-based operational space control, stiffness control and impedance control are presented as the basic strategies for indirect force control; a key feature is the coverage of six-degree-of-freedom interaction tasks and manipulator kinematic redundancy. Then, direct force control strategies are presented which are obtained from motion control schemes suitably modified by the closure of an outer force regulation feedback loop. Finally, advanced force and position control strategies are presented which include passivity-based, adaptive and output feedback control schemes. Remarkably, all control schemes are experimentally tested on a setup consisting of a seven-joint industrial robot with open control architecture and force/torque sensor. The topic of robot force control is not treated in depth in robotics textbooks, in spite of its crucial importance for practical manipulation tasks. In the few books addressing this topic, the material is often limited to single-degree-of-freedom tasks. On the other hand, several results are available in the robotics literature but no dedicated monograph exists. The book is thus aimed at filling this gap by providing a theoretical and experimental treatment of robot force control.

A modern and unified treatment of the mechanics, planning, and control of robots, suitable for a first course in robotics.

Force Control of Robotics Systems is the first book that focuses on the fundamentals of this complex topic. Written to engage in force control research, this timely volume presents original results, some of which previously have not been readily accessible to Western Audiences. Issues covered include force sensor design, force feedback synthesis, closed-loop dynamics, and more. The theoretical analysis is based on the methods of Analytical Dynamics and Control Theory. The book also considers fundamental problems related to force control, and explains how to design simple and efficient control algorithms for performing tasks with robots. Algorithms and design methods are experimentally verified and emphasize practical applications.

Methods by which robots can learn control laws that enable real-time reactivity using dynamical systems; with applications and exercises. This book presents a wealth of machine learning techniques to make the control of robots more flexible and safe when interacting with humans. It introduces a set of control laws that enable reactivity using dynamical systems, a widely used method for solving motion-planning problems in robotics. These control approaches can replan in milliseconds to adapt to new environmental constraints and offer safe and compliant control of forces in contact. The techniques offer theoretical advantages, including convergence to a goal, non-penetration of obstacles, and passivity. The coverage of learning begins with low-level control parameters and progresses to higher-level competencies composed of combinations of skills. Learning for Adaptive and Reactive Robot Control is designed for graduate-level courses in robotics, with chapters that proceed from fundamentals to more advanced content. Techniques covered include learning from demonstration, optimization, and reinforcement learning, and using dynamical systems in learning control laws, trajectory planning, and methods for compliant and force control . Features for teaching in each chapter: applications, which range from arm manipulators to whole-body control of humanoid robots; pencil-and-paper and programming exercises; lecture videos, slides, and MATLAB code examples available on the author’s website . an eTextbook platform website offering protected material[EPS2] for instructors including solutions.

Robot Manipulator Control offers a complete survey of control systems for serial-link robot arms and acknowledges how robotic device performance hinges upon a well-developed control system. Containing over 750 essential equations, this thoroughly up-to-date Second Edition, the book explicates theoretical and mathematical requisites for controls design and summarizes current techniques in computer simulation and implementation of controllers. It also addresses procedures and issues in computed-torque, robust, adaptive, neural network, and force control. New chapters relay practical information on commercial robot manipulators and devices and cutting-edge methods in neural network control.

Introduces the basic concepts of robot manipulation--the fundamental kinematic and dynamic analysis of manipulator arms, and the key techniques for trajectory control and compliant motion control. Material is supported with abundant examples adapted from successful industrial practice or advanced research topics. Includes carefully devised conceptual diagrams, discussion of current research topics with references to the latest publications, and end-of-book problem sets. Appendixes. Bibliography.

The book “Mechatronics: Recent Technological and Scientific Advances” provides comprehensive and accessible coverage of the evolving disciplines of mechatronics for nanotechnology, automatic control & robotics, biomedical engineering, design manufacturing and testing of MEMS, metrology, photonics, mechatronic products majors. It is already the third volume following the previous editions in 2007 and 2009 providing a recent state of advances in mechatronics presented on the 9th International Conference Mechatronics 2011, hosted this year at the Faculty of Mechatronics, Warsaw University of Technology, Poland. The carefully selected contributions give an insight into the current development of these scientific disciplines, present the new results of research and development and indicate the trends of development in the interdisciplinary field of mechatronics systems. Even though many people believe that the presence of mechanical, electrical, electronic components, and computers make a system mechatronics, others do not feel the same as there is nothing wrong with the individual identity. The enclosed material is original, and reflects the main research tendencies and developments in mechatronics among Mechatronics 2011 contributing countries. It helps to acquire the mix of skills needed to comprehend and design mechatronic systems and also provides with the frame of understanding to develop a truly interdisciplinary and integrated approach to engineering. The enclosed material is original, and reflects the main research tendencies and developments in mechatronics among Mechatronics 2011 contributing countries. It helps to acquire the mix of skills needed to comprehend and design mechatronic systems and also provides with the frame of understanding to develop a truly interdisciplinary and integrated approach to engineering.

This book presents recent advances in robot control theory on task space sensory feedback control of robot manipulators. By using sensory feedback information, the robot control systems are robust to various uncertainties in modelling and calibration errors of the sensors. Several sensory task space control methods that do not require exact knowledge of either kinematics or dynamics of robots, are presented. Some useful methods such as approximate Jacobian control, adaptive Jacobian control, region control and multiple task space regional feedback are included. These formulations and methods give robots a high degree of flexibility in dealing with unforeseen changes and uncertainties in its kinematics and dynamics, which is similar to human reaching movements and tool manipulation. It also leads to the solution of several long-standing problems and open issues in robot control, such as force control with constraint uncertainty, control of multi-fingered robot hand with uncertain contact points, singularity issue of Jacobian matrix, global task-space control, which are also presented in this book. The target audience for this book includes scientists, engineers and practitioners involved in the field of robot control theory.