Seismic Fragility Of Nuclear Power Plant Components

This book is a comprehensive compilation of earthquake- and tsunami-related technologies and knowledge for the design and construction of nuclear facilities. As such, it covers a wide range of fields including civil engineering, architecture, geotechnical engineering, mechanical engineering, and nuclear engineering, for the development of new technologies providing greater resistance against earthquakes and tsunamis. It is crucial both for students of nuclear energy courses and for young engineers in nuclear power generation industries to understand the basics and principles of earthquake- and tsunami-resistant design of nuclear facilities. In Part I, "Seismic Design of Nuclear Power Plants", the design of nuclear power plants to withstand earthquakes and tsunamis is explained, focusing on buildings, equipment's, and civil engineering structures. In Part II, "Basics of Earthquake Engineering", fundamental knowledge of earthquakes and tsunamis as well as the dynamic response of structures and foundation ground are explained.

Experience shows that an assessment of the seismic capacity of an existing operating facility can be required for a number of reasons, for example identification of potential seismic vulnerabilities based on operating experience events or the periodic safety review programme. This publication covers the seismic safety evaluation programmes to be performed on existing nuclear installations in order to ensure that the required fundamental safety functions are available, with particular attention to the safe shutdown of reactors. It includes lessons learned based on the IAEA Action Plan on Nuclear Safety following the Fukushima Daiichi accident, and updated methodologies for seismic safety evaluation of nuclear installations.

Over the last three decades the process industries have grown very rapidly, with corresponding increases in the quantities of hazardous materials in process, storage or transport. Plants have become larger and are often situated in or close to densely populated areas. Increased hazard of loss of life or property is continually highlighted with incidents such as Flixborough, Bhopal, Chernobyl, Three Mile Island, the Phillips 66 incident, and Piper Alpha to name but a few. The field of Loss Prevention is, and continues to, be of supreme importance to countless companies, municipalities and governments around the world, because of the trend for processing plants to become larger and often be situated in or close to densely populated areas, thus increasing the hazard of loss of life or property. This book is a detailed guidebook to defending against these, and many other, hazards. It could without exaggeration be referred to as the "bible" for the process industries. This is THE standard reference work for chemical and process engineering safety professionals. For years, it has been the most complete collection of information on the theory, practice, design elements, equipment, regulations and laws covering the field of process safety. An entire library of alternative books (and cross-referencing systems) would be needed to replace or improve upon it, but everything of importance to safety professionals, engineers and managers can be found in this all-encompassing reference instead. Frank Lees' world renowned work has been fully revised and expanded by a team of leading chemical and process engineers working under the guidance of one of the world’s chief experts in this field. Sam Mannan is professor of chemical engineering at Texas A&M University, and heads the Mary Kay O’Connor Process Safety Center at Texas A&M. He received his MS and Ph.D. in chemical engineering from the University of Oklahoma, and joined the chemical engineering department at Texas A&M University as a professor in 1997. He has over 20 years of experience as an engineer, working both in industry and academia. New detail is added to chapters on fire safety, engineering, explosion hazards, analysis and suppression, and new appendices feature more recent disasters. The many thousands of references have been updated along with standards and codes of practice issued by authorities in the US, UK/Europe and internationally. In addition to all this, more regulatory relevance and case studies have been included in this edition. Written in a clear and concise style, Loss Prevention in the Process Industries covers traditional areas of personal safety as well as the more technological aspects and thus provides balanced and in-depth coverage of the whole field of safety and loss prevention. * A must-have standard reference for chemical and process engineering safety professionals * The most complete collection of information on the theory, practice, design elements, equipment and laws that pertain to process safety * Only single work to provide everything; principles, practice, codes, standards, data and references needed by those practicing in the field

This Safety Guide provides recommendations on a generally accepted way to design a nuclear power plant so that an earthquake motion at the site will not jeopardize the safety of the plant. It also gives guidance on a consistent application of methods and procedures for analysis, testing and qualification of structures and equipment so that they meet the safety requirements covering the design of nuclear power plants, safety assessments for the design and the regulatory issues concerned with the licensing of plants.

The development of protective measures to guard against the spread of radioactive debris following reactor disasters has been given extensive and careful engineering attention over the past several years. Much of this attention has been devoted to eliminating or minimizing the effects of malfunctions of internal components. But reactors can also suffer externally caused disasters—for example, their radioactive cores can be damaged by earthquakes or by missiles generated by tornadoes. Earthquakes in particular will continue to render man vulnerable even to the "peaceful atom" as the number of nuclear power plants increases and as they come to be located in those parts of the world that have a history of seismic activity. It was to consider such problems that the seminar reported here was held. The conferees, who are leaders in this special and important field, gathered in Cambridge, Massachusetts, in spring 1969, to present the papers whose titles are listed below. Together they cover both the theoretical underpinnings of the subject and specific applications to nuclear reactors; they provide both useful summaries of what is known to date and some new thinking on the subject, not before published. Contents: Preface—T. J. Thompson. Foreword—R. J. Hansen. Introduction—R. V. Whitman. Geological and Seismological Factors Influencing the Assessment of a Seismic Threat to Nuclear Reactors—Daniel Linehan, S. J. Geophysics—Keiiti Aki. Design Seismic Inputs—C. Allin Cornell. Some Observations on Probabilistic Methods in the Seismic Design of Nuclear Power Plants—C. Allin Cornell. Seismic Risk and Seismic Design Decisions—Luis Esteva. Fundamentals of Soil Amplification—J. M. Roesset. Soil Structure Interaction—R. V. Whitman. Evaluation of Soil Properties for Site Evaluation and Dynamic Analysis of Nuclear Plants—R. V. Whitman. Structural Response to Seismic Input—J. M. Biggs. Seismic Analysis of Equipment Mounted on a Massive Structure—J. M. Biggs and J. M. Roesset. Modal Response of Containment Structures—Peter Jan Pahl. Provision of Required Seismic Resistance—M. J. Holley, Jr. A Measure of Earthquake Intensity—Arturo Arias. Closure—R. J. Hansen.