Severe Plastic Deformation And Thermomechanical Processing Nanostructuring And Properties

Severe plastic deformation (SPD) is a very attractive research field for metallic materials because it provides new possibilities for manufacturing nanostructured materials in large quantities and allows microstructural design on different hierarchical levels. The papers included in this issue address the following topics: novel SPD processes as well as recent advancements in established processing methods, microstructure evolution and grain refinement in single- and multi-phase alloys as well as composites, strategies to enhance the microstructure stability at elevated temperatures, mechanically driven phase transformations, surface nanostructuring, gradient and multilayered materials, and mechanical and physical properties of SPD-processed materials.

Severe plastic deformation (SPD) is a very attractive research field for metallic materials because it provides new possibilities for manufacturing nanostructured materials in large quantities and allows microstructural design on different hierarchical levels. The papers included in this issue address the following topics: novel SPD processes as well as recent advancements in established processing methods, microstructure evolution and grain refinement in single- and multi-phase alloys as well as composites, strategies to enhance the microstructure stability at elevated temperatures, mechanically driven phase transformations, surface nanostructuring, gradient and multilayered materials, and mechanical and physical properties of SPD-processed materials.

Severe Plastic Deformation: Methods, Processing and Properties examines all severe plastic deformation techniques developed over the past two decades, exploring the appropriate severe plastic deformation method for a particular case. The book offers an overview of these methods, introduces ultrafine-grained and nano-grained metals and methods for various bulk, sheet, tubular and large size samples, reviews effective parameters to make a severe plastic deformation method better, from property (mechanical) and processing (cost, time, load, etc.) viewpoints, discusses mechanical, physical and chemical properties of UFG and NS metals, and concludes with various applications for these methods. Over the last several decades, a large number of severe plastic deformation methods have been developed for processing a wide array of metals for superior properties, making this a timely resource.

It has been already well established that the nanostructured materials (materials with a grain size of 100mm or less) is the future materials. Nanostructured materials possess properties superior to those of conventional, coarse grained materials. Hence designing potentially cost efficient and environmentally friendly products with better performance is a possibility. Among others, nanostructured materials exhibit increased strength, hardness and ductility and provide an opportunity for superplastic forming. When all the procedures in use for the production of nanostructured materials are examined, only severe plastic deformation (SPD) processes exhibit a potential for producing relatively large samples suitable for industrial applications. In this monograph, the state-of-the-art on severe plastic deformation methods is presented in one volume. The monograph is organised into eight chapters, each of which contains papers on different aspect of severe plastic deformation methods prepared by the experts in this field. The topics covered in the monograph are structure formation, phase transformation, superplasticity, mechanical properties of nanostructured materials, electronic and magnetic properties of nanostructured materials, deformation analysis, novel SPD methods, commercialisation of ECAE method.

Recently, it was reported that nanostructured materials processed under high pressure by HPT and ECAP have an extraordinary combination of both high strength and high ductility, which are two desirable, but rarely co-existing properties. These findings indicate that high-pressure is a critical factor that can be employed to process nanostructured materials with superior mechanical, and possibly also physical, properties. It is the objective of this workshop to review our current knowledge, identify issues for future research, and discuss future directions on the processing and properties of nanostructured materials via SPD techniques, with a special emphasis on high-pressure effects. The 42 peer-reviewed papers in this book cover areas of high pressure effect on the nanostructure and properties of SPD-processed materials, fundamentals of nanostructured materials, development of high-pressure SPD technologies for commercializations, recent advances of SPD technologies as well as applications and future markets of SPD-processed nanostructured materials.

Recently, it was reported that nanostructured materials processed under high pressure by HPT and ECAP have an extraordinary combination of both high strength and high ductility, which are two desirable, but rarely co-existing properties. These findings indicate that high-pressure is a critical factor that can be employed to process nanostructured materials with superior mechanical, and possibly also physical, properties. It is the objective of this workshop to review our current knowledge, identify issues for future research, and discuss future directions on the processing and properties of nanostructured materials via SPD techniques, with a special emphasis on high-pressure effects. The 42 peer-reviewed papers in this book cover areas of high pressure effect on the nanostructure and properties of SPD-processed materials, fundamentals of nanostructured materials, development of high-pressure SPD technologies for commercializations, recent advances of SPD technologies as well as applications and future markets of SPD-processed nanostructured materials.

These proceedings of the "Second International Conference on Nanomaterials by Severe Plastic Deformation" review the enormous scientific avalanche that has been developing in the field over recent years. A valuable resource for any scientist and engineer working in this emerging field of nanotechnology.

The processing and mechanical behaviour of bulk nanostructured materials are one of the most interesting new fields of research on advanced materials systems. Many nanocrystalline materials possess very high strength with still good ductility, and exhibit high values of fatigue resistance and fracture toughness. There has been continuing interest in these nanomaterials for use in structural and biomedical applications, and this has led to a large number of research programs worldwide. This book focuses on the processing techniques, microstructures, mechanical and physical properties, and applications of bulk nanostructured materials, as well as related fundamental issues. Only since recently can such bulk nanostructured materials be produced in large bulk dimensions, which opens the door to their commercial applications.