Simulation Of Multiphase Flows With Multiparameter Equations Of State And The Discontinuous Galerkin Method

This book gathers the proceedings of the 11th workshop on Direct and Large Eddy Simulation (DLES), which was held in Pisa, Italy in May 2017. The event focused on modern techniques for simulating turbulent flows based on the partial or full resolution of the instantaneous turbulent flow structures, as Direct Numerical Simulation (DNS), Large-Eddy Simulation (LES) or hybrid models based on a combination of LES and RANS approaches. In light of the growing capacities of modern computers, these approaches have been gaining more and more interest over the years and will undoubtedly be developed and applied further. The workshop offered a unique opportunity to establish a state-of-the-art of DNS, LES and related techniques for the computation and modeling of turbulent and transitional flows and to discuss about recent advances and applications. This volume contains most of the contributed papers, which were submitted and further reviewed for publication. They cover advances in computational techniques, SGS modeling, boundary conditions, post-processing and data analysis, and applications in several fields, namely multiphase and reactive flows, convection and heat transfer, compressible flows, aerodynamics of airfoils and wings, bluff-body and separated flows, internal flows and wall turbulence and other complex flows.

This book offers a fundamental and practical introduction to the use of computational methods. A thorough discussion of practical aspects of the subject is presented in a consistent manner, and the level of treatment is rigorous without being unnecessarily abstract. Each chapter ends with bibliographic information and exercises.

This book presents the latest research in one of the most challenging, yet most universally applicable areas of technology. Multiphase flows are found in all areas of technology, at all length scales and flow regimes, involving compressible or incompressible linear or nonlinear fluids. The range of related problems of interest is vast, including astrophysics, biology, geophysics, atmospheric process, and many areas of engineering. The solution of the equations that describe such complex problems often requires a combination of advanced computational and experimental methods. For example, any models developed must be validated through the application of expensive and difficult experimental techniques. Numerous problems in the area thus remain as yet unsolved, including modelling nonlinear fluids, modelling and tracking interfaces, dealing with multiple length scales, characterising phase structures, and treating drop break-up and coalescence. The papers contained in the book were presented at the eighth in a well established series of biennial conferences that began in 2001. They represent close interaction between numerical modellers and other researchers working to gradually resolve the many outstanding issues in understanding of multiphase flow. The papers in the book cover such topics as: Multiphase Flow Simulation; Bubble and Drop Dynamics; Interface Behaviour; Experimental Measurements; Energy Applications; Compressible Flows; Flow in Porous Media; Turbulent Flow; Image Processing; Heat Transfer; Atomization; Hydromagnetics; Plasma; Fluidised Beds; Cavitation.

Multiphase flows are found in all areas of technology, at all length scales and flow regimes and can involve compressible or incompressible linear or nonlinear, fluids. However, although they are ubiquitous, multiphase flows continue to be one of the most challenging areas of computational mechanics, with numerous problems as yet unsolved. Advanced computational and experimental methods are often required to solve the equations that describe such complex problems. The many challenges that must be faced in solving them include modelling nonlinear fluids, modelling and tracking interfaces, dealing with multiple length scales, characterising phase structures, and treating drop break-up and coalescence. It is important to validate models, which calls for the use of expensive and difficult experimental techniques.This book presents contributions on the latest research in the techniques for solving multiphase flow problems, presented at the seventh in a biennial series of conferences on the subject that began in 2001. Featured topics include: Flow in porous media; Turbulent flow; Multiphase flow simulation; Image processing; Heat transfer; Atomization; Interface behaviour; Oil and gas applications; Experimental measurements; Energy applications; Biological flows; Micro and macro fluids; Compressible flows.

Multiphase flows, which can involve compressible or incompressible linear or nonlinear, fluids, Are found in all areas of technology, at all length scales and flow regimes. In spite of their ubiquitousness, however multiphase flow continues to be one of the most challenging areas of computational mechanics and experimental methods, with numerous problems remaining unsolved to date. Because the multiphase flow problems are so complex, advanced computational and experimental methods are often required to solve the equations that describe them. The many hhallenges include modelling nonlinear fluids, modelling and tracking interfaces, dealing with multiple length scales, characterizing phase structures, and treating drop breakup and coalescence. Models must be validated, which requires the use of expensive and difficult experimental techniquess. This book presents contributions on the latest research in these techniques, presented at the sixth in a biennial series of conferences on the subject that begain in 2001. Featured topics include: Bubble and drop dynamics, Flow in porous media, Turbulent flow, Multiphase flow simulation, Image processing, Heat transfer, Interaction of gases, liquids and solids, Interface behaviour, Small scale phenomena, Atomization processes, and Liquid film behaviour.

Fluid Dynamics is one of the most important topics of applied mathematics and physics. Together with complex flows and turbulence, multiphase flows remains one of the most challenging areas of computational mechanics, and even seemingly simple problems remain unsolved to date. Multiphase flows are found in all areas of technology, at all length scales and flow regimes. The fluids involved can be compressible or incompressible, linear or nonlinear. Because of the complexity of the problem, it is often essential to utilize advanced computational and experimental methods to solve the complex equations that describe them. Challenges in these simulations include nonlinear fluids, treating drop breakup and coalescence, characterizing phase structures, and many others.This volume brings together work presented at the Fourth International Conference on Computational and Experimental Methods in Multiphase and Complex Flows. Featured topics include: Suspensions; Bubble and Drop Dynamics; Flow in Porous Media; Interfaces; Turbulent Flow; Injectors and Nozzles; Particle Image Velocimetry; Macroscale Constitutive Models; Large Eddy Simulation; Finite Volumes; Interface Tracking Methods; Biological Flows; Environmental Multiphase Flow; Phase Changes and Stochastic Modelling.

Multi-phase flows are part of our natural environment such as tornadoes, typhoons, air and water pollution and volcanic activities as well as part of industrial technology such as power plants, combustion engines, propulsion systems, or chemical and biological industry. The industrial use of multi-phase systems requires analytical and numerical strategies for predicting their behavior. In its third extended edition this monograph contains theory, methods and practical experience for describing complex transient multi-phase processes in arbitrary geometrical configurations, providing a systematic presentation of the theory and practice of numerical multi-phase fluid dynamics. In the present first volume the fundamentals of multiphase dynamics are provided. This third edition includes various updates, extensions and improvements in all book chapters.