Solid Waste Assessment Monitoring And Remediation

This book covers a broad group of wastes, from biowaste to hazardous waste, but primarily the largest (by mass and volume) group of wastes that are not hazardous, but also are not inert, and are problematic for three major reasons: (1) they are difficult to manage because of their volume: usually they are used in civil engineering as a common fill etc., where they are exposed to environmental conditions almost the same way as at disposal sites; (2) they are not geochemically stable and in the different periods of environmental exposure undergo transformations that might add hazardous properties to the material that are not displayed when it is freshly generated; (3) many designers and researchers in different countries involved in waste management are often not aware of time-delayed adverse environmental impact of some large-volume waste, and also do not consider some positive properties that may extend the area of their environmentally beneficial application.

This book covers a broad group of wastes, from biowaste to hazardous waste, but primarily the largest (by mass and volume) group of wastes that are not hazardous, but also are not inert, and are problematic for three major reasons : (1) they are difficult to manage because of their volume : usually they are used in civil engineering as a common fill etc., where they are exposed to environmental conditions almost the same way as at disposal sites; (2) they are not geochemically stable and in the different periods of environmental exposure undergo transformations that might add hazardous properties to the material that are not displayed when it is freshly generated; (3) many designers and researchers in different countries involved in waste management are often not aware of time-delayed adverse environmental impact of some large-volume waste, and also do not consider some positive properties that may extend the area of their environmentally beneficial application.--[Source inconnue].

This landmark new book sets the standard for planning, performing, and interpreting investigations for solid and hazardous waste sites and selecting appropriate locations for ground-water monitoring. It covers the technical components of assessment monitoring programs that define both the rate and extent of contamination and provide design criteria for aquifer remediation. Technical tools are discussed in detail to provide background techniques such as flow net constructions, cross section instructions, and documentation standards. More than 500 figures and tables illustrate the author's structured holistic program for examining the physical, chemical, and environmental factors of a site for waste disposal. The technical aspects of site assessments regarding contaminated ground-water evaluation and remediation are also covered in detail. Learn the fundamentals of site assessments This classic guide explains the fundamentals of a technical approach to site assessments. It is the principle text used for training EPA regional project managers for Superfund sites. The book uses a practical, step-by-step format to walk you through the following tasks:

This book explores state-of-art techniques based on methodological and modeling aspects of solid and hazardous waste management, specifically focusing on the recent trends in data acquisition and robust modeling of the results obtained. In addition to an in-depth description of the recent regulatory paradigm for solid waste disposal and revealing insights into solid waste management models, the book also addresses significant case history and remediation methodologies for sustainable development in emerging economies like India, China and Brazil. The main emphasis is on a suitable regulatory framework with site-specific baseline calibration and aimed at the robust modeling of contaminant transport and its remediation. This is based on instructive case history in various locations/regions worldwide. The focus on recent modeling and quantification methods is the backbone of the book. One of the major aspects discussed is the application of non-invasive methods for studies related to the Earth's interior, which are increasingly preferred over invasive techniques thanks to their economic utility, as well as robust techniques for the interpretation of geophysical data. The increasing demand for groundwater and energy resources, especially for rapidly emerging countries with large populations like India and China, has made it vital to derive safe utilization approaches for our resources, including suitable waste disposal and remediation methodologies that can be adopted for 'contaminated sites.'

By combining integrated solid waste management with the traditional coverage of landfills, this new edition offers the first comprehensive guide to managing the entire solid waste cycle, from collection, to recycling, to eventual disposal. * Includes new material on source reduction, recycling, composting, contamination soil remediation, incineration, and medical waste management. * Presents up-to-date chapters on bioreactor landfills, wetland mitigation, and landfill remediation. * Offers comprehensive coverage of the role of geotechnical engineering in a wide variety of environmental issues.

Solid waste has grown into a relatively difficult problem to solve for those responsible for its management; these responsibilities include the collection, transport, treatment, and disposal of solid wastes, particularly wastes generated in medium and large urban centres. This problem is even more intense in economically developing countries, where the financial, human, and other critical resources are scarce in general. In the last decade, there has been a great interest and awareness regarding the environmentally safe management of waste worldwide, centralised in legislative, administrative, standardisation, and research activities in this field. Therefore, it is essential to develop short- and long-term waste management strategies (often named the 3Rs) and their consequent implementation in compliance with the formulated priorities for waste: (1) Reduce, (2) Recycle, (3) Reuse and (4) environmentally safe disposal. Several contradictions and lack of agreement still exist, even regarding the major basic definitions, e.g., which material should be treated as "waste" and which as a "beneficial raw material", which wastes are "hazardous" and which are "non-hazardous", etc. Quite often, different approaches and as a consequence, waste management/disposals are adopted for the same situation/materials. Environmental risk assessment procedures and mode of actions are varied greatly not only within national levels, but also at regional levels within the same country by different groups of scientists and/or policy makers. The general idea of the book has arisen from the mutual experience of many specialists in numerous disciplines from different countries involved in the problem of environmental assessment, economic and monitoring approaches, and control approaches for chemicals generated from solid waste disposal. Solid waste worldwide issues nowadays reflect the complexity and unbalanced development of our world at the beginning of the 21st century. This book covers a broad group of wastes, from biowaste to hazardous waste. The contributors to the book are recognised experts in the diverse fields associated with the issues of waste management and the reuse-recycle of materials, and are from different parts of the world. Authors present their experience and approaches considering both international and national/local specifics. The book is addressed to the wide range of end-users, decision-makers and professionals involved in environmental and agricultural issues: administration, designers, manufacturers, policy makers, farmers, researchers, academics and university students, and is focused on waste properties, environmental behaviour and management in an environmentally safe way. It was not the intention of the editor/authors to exhaust the subject, which is intensely broad, but to give a general idea with updating trends in the field of solid waste management concerning disposal, monitoring, assessment and remedial options, which are demonstrated also in case studies. The authors hope that this book to some extent will contribute to the trials and efforts for the proper, environmentally safe practices of solid waste disposal, and will provide state-of-the-art information and discussion, monitoring strategies, advanced approaches and methods, techniques and equipment for environmentally safe disposal and remediation of solid wastes.

Hazardous Waste Site Remediation is an outstanding textbook that reviews specific treatment processes, as well as pertinent basic concepts in organic geochemistry, material balance mass transfer, thermodynamics, and kinetics. Following a quantitative approach to source control, the text covers regulations, materials handling, engineering principles, soil vapor extraction, chemical extraction and soil washing, solidification and stabilization, and chemical destruction. It also explores topics in bioremediation, thermal processes, risk assessment, and waste minimization. A solutions manual is available.

Geoenvironmental Engineering covers the application of basic geological and hydrological science, including soil and rock mechanics and groundwater hydrology, to any number of different environmental problems. * Includes end-of-chapter summaries, design examples and worked-out numerical problems, and problem questions. * Offers thorough coverage of the role of geotechnical engineering in a wide variety of environmental issues. * Addresses such issues as remediation of in-situ hazardous waste, the monitoring and control of groundwater pollution, and the creation and management of landfills and other above-ground and in-situ waste containment systems.