State Of The Art In Computer Graphics

Today one of the hardest parts of computer aided design or analysis is first modeling the design, then recording and verifying it. For example, a typical vehicle such as a tank, automobile, ship or aircraft might be composed of tens of thousands of individual parts. Many of these parts are composed of cylinders, flats, and simple conic curves and surfaces such as are amenable to modeling using a constructive solid geometry (CSG) approach. However, especially with the increasing use of composite materials, many parts are designed using sculp tured surfaces. A marriage of these two techniques in now critical to continued development of computer aided design and analysis. Further, the graphical user interfaces used in most modeling systems are at best barely adequate to the required task. Critical work on these interfaces is required to continue pushing back the frontiers. Similarly, once the design is modeled, how are the varied and diverse pieces stored, retrieved, and modified? How are physical interferences prevented or eliminated? Although considerable progress has been made, there are still more questions and frustrations than answers. One of the fundamental problems of the 1990s is and will continue to be modeling. The second problem is interpretation. With the ever increasing computational power available, our ability to generate data far exceeds our ability to interpret, understand, and utilize that data.

State of the Art in Computer Graphics Aspects of Visualization This is the fourth volume derived from a State of . . . the Art in Computer Graphics Summer Institute. It represents a snapshot of a number of topics in computer graphics, topics which include visualization of scientific data; modeling; some aspects of visualization in virtual reality; and hardware architectures for visu alization. Many papers first present a background introduction to the topic, followed by discussion of current work in the topic. The volume is thus equally suitable for nonspecialists in a particular area, and for the more experienced researcher in the field. It also enables general readers to obtain an acquaintance with a particular topic area sufficient to apply that knowledge in the context of solving current problems. The volume is organized into four chapters - Visualization of Data, Modeling, Virtual Reality Techniques, and Hardware Architectures for Visualization. In the first chapter, Val Watson and Pamela Walatka address the visual aspects of fluid dynamic computations. They discuss algorithms for function-mapped surfaces and cutting planes, isosurfaces, particle traces, and topology extractions. They point out that current visualization systems are limited by low information transfer bandwidth, poor response to viewing and model accuracy modification requests, mismatches between model rendering and human cognitive capabilities, and ineffective interactive tools. However, Watson and Walatka indicate that proposed systems will correct most of these problems.

Research, development, and applications in computer graphics have dramatically expanded in recent years. Because of decreasing prices, superior hardware is now being used and image quality is better than ever. Many people now require image-synthesis techniques and software for their applicaions. Moreover, the techniques of computer ani mation have become very popular. In this book, we present a wide range of applications of computer graphics. This book is a collection of 44 papers in various areas of computer graphics selected from papers presented at Graphics Interface '85. Graphics Interface '85, held from May 27 to 31 in Montreal, was the first truly international computer graphics conference in Canada. This year, for the first time, the conference was presented jointly by the Com puter Graphics Society and the Canadian Man-Computer Communications Society. This new arrangement gave the conference international scope. The conference was spon sored by the Department of Communications in Ottawa, the Department of Science and Technology in Quebec, Supply and Services Canada, the Natural Sciences and Engineer ing Research Council of Canada, Hydro-Quebec, the "Association Canadienne Fran«aise pour I' Avancement des Sciences", and the Canadian Broadcasting Corpora tion. Graphics Interface '85 was organized by "1'Ecole des Hautes Etudes Commerciales" of the University of Montreal. Over 100 papers were submitted to the conference , but 64 were selected by the inter national program committee for presentation. This book contains new expanded versions of the papers.

Selected topics and papers from the first international workshop on computer animation, held in Geneva in 1989, provide a comprehensive overview of the problems encountered in the rising field of computer animation. To foster interactive links between researchers, end-users, and artists, roundtables and discussions have been included as well as presentations of concepts and research themes such as keyframe to task-level animation, artificial intelligence, natural language and simulation for human animation, choreography, anthropometry for animated human figures, facial animation and expressions, the use of dynamic simulation, motion control and blur, and data-base oriented animation design.

Today one of the hardest parts of computer aided design or analysis is first modeling the design, then recording and verifying it. For example, a typical vehicle such as a tank, automobile, ship or aircraft might be composed of tens of thousands of individual parts. Many of these parts are composed of cylinders, flats, and simple conic curves and surfaces such as are amenable to modeling using a constructive solid geometry (CSG) approach. However, especially with the increasing use of composite materials, many parts are designed using sculp tured surfaces. A marriage of these two techniques in now critical to continued development of computer aided design and analysis. Further, the graphical user interfaces used in most modeling systems are at best barely adequate to the required task. Critical work on these interfaces is required to continue pushing back the frontiers. Similarly, once the design is modeled, how are the varied and diverse pieces stored, retrieved, and modified? How are physical interferences prevented or eliminated? Although considerable progress has been made, there are still more questions and frustrations than answers. One of the fundamental problems of the 1990s is and will continue to be modeling. The second problem is interpretation. With the ever increasing computational power available, our ability to generate data far exceeds our ability to interpret, understand, and utilize that data.

Today one of the hardest parts of computer aided design or analysis is first modeling the design, then recording and verifying it. For example, a typical vehicle such as a tank, automobile, ship or aircraft might be composed of tens of thousands of individual parts. Many of these parts are composed of cylinders, flats, and simple conic curves and surfaces such as are amenable to modeling using a constructive solid geometry (CSG) approach. However, especially with the increasing use of composite materials, many parts are designed using sculp tured surfaces. A marriage of these two techniques in now critical to continued development of computer aided design and analysis. Further, the graphical user interfaces used in most modeling systems are at best barely adequate to the required task. Critical work on these interfaces is required to continue pushing back the frontiers. Similarly, once the design is modeled, how are the varied and diverse pieces stored, retrieved, and modified? How are physical interferences prevented or eliminated? Although considerable progress has been made, there are still more questions and frustrations than answers. One of the fundamental problems of the 1990s is and will continue to be modeling. The second problem is interpretation. With the ever increasing computational power available, our ability to generate data far exceeds our ability to interpret, understand, and utilize that data.

Packed with exercises, this book is an application-independent and reader-friendly primer for anyone with a serious desire to understand 3D Computer Graphics. Opening with the first and most basic elements of computer graphics, the book rapidly advances into progressively more complex concepts. Each of the elements, however simple, are important to understand because each is an essential link in a chain that allows an artist to master any computer graphics application. With this accomplished, the artist can use technology to satisfy his/her goals, instead of the technology being master of the artist.