Static Creep Micro Macro Fracture Mechanics Of Brittle Solids

This book gathers a large amount of recent research results on this topic to better understand the static creep micro–macro fracture mechanics in brittle solids (e.g., glass, ceramic, concrete, ice, and rock). To be precise, this is about to explore the effects of the external factors of stress paths, water content, seepage pressure, dynamic disturbance, thermal treated temperature, and the internal factors of crack angle, size, recovery, and nucleation coalescence on the static creep fracture mechanical properties in brittle solids. This book provides important theoretical support in evaluation for long-term lifetime in the brittle solid engineering (e.g., deep underground engineering, architecture engineering, aerospace engineering, and mechanical manufacturing engineering).

This book is a monograph on the brittle fracture of ceramic materials, in a unified continuum, microstructural and atomistic treatment.

Failure of components which operate in the creep range can result either from the growth of a dominant crack or through the accumulation of 'damage' in the material. Conventional and nuclear power generating plant are generally designed on the basis of continuum failure, with assessment routes providing an indication of the effects of flaws on component performance. Another example where an understanding of creep failure is important is in the design of offshore structures which operate in arctic waters. These structures can be subjected to quite considerable forces by wind-driven ice sheets, which are limited by failure of the ice sheet. Design codes are currently being developed which identify the different mechanisms of failure, ranging from continuum crushing to radial cracking and buckling of the ice sheet. Our final example concerns engineering ceramics, which are currently being considered for use in a wide range of high-temperature applications. A major problem preventing an early adoption of these materials is their brittle response at high stresses, although they can behave in a ductile manner at lower stresses. In each of the above situations an understanding of the processes of fast fracture, creep crack growth and continuum failure is required, and in particular an understanding of the material and structural features that influence the transition from brittle to ductile behaviour. The translation of this information to component design is most advanced for metallic components.

Cracks and Fracture consists of nine chapters in logical sequence. In two introductory chapters, physical processes in the vicinity of the crack edge are discussed and the fracture process is described. Chapter 3 develops general basic concepts and relations in crack mechanics, such as path independent integrals, stress intensity factors and energy flux into the crack edge region. Chapters 4-7 deal with elastostatic cracks, stationary or slowly moving elastic-plastic cracks, elastodynamic crack mechanics and elastoplastic aspects of fracture, including dynamic fracture mechanics. Appendices include general formulae, the basic theory of analytic functions, introduction to Laplace and Hankel transforms and description of certain basic relations, for instance for stress waves in solids. There is an extensive bibliography, containing references to both classical and recent work, and a comprehensive index. Presents an extensive bibliography containing references to both classical and recent works and a comprehensive index Appendices include general formulas, the basic theory of analytic functions, introduction to Laplace and Hankel transforms, and descriptions of certain basic relations, for instance for stress waves in solids

Intended for engineers, researchers, and graduate students dealing with materials science, structural design, and nondestructive testing and evaluation, this book represents a continuation of the author's 'Fracture Mechanics' (1997). It will appeal to a variety of audiences: The discussion of design codes and procedures will be of use to practicing engineers, particularly in the nuclear, aerospace, and pipeline industries; the extensive bibliography and discussion of recent results will make it a useful reference for academic researchers; and graduate students will find the clear explanations and worked examples useful for learning the field. The book begins with a general treatment of fracture mechanics in terms of material properties and loading and provides up-to-date reviews of the ductile-brittle transition in steels and of methods for analyzing the risk of fracture. It then discusses the dynamics of fracture and creep in homogeneous and isotropic media, including discussions of high-loading-rate characteristics, the behavior of stationary cracks in elastic media under stress, and the propagation of cracks in elastic media. This is followed by an analysis of creep and crack initiation and propagation, describing, for example, the morphology and incubation times of crack initiation and growth and the effects of high temperatures. The book concludes with treatments of cycling deformation and fatigue, creep-fatigue fractures, and crack initiation and propagation. Problems at the end of each chapter serve to reinforce and test the student's knowledge and to extend some of the discussions in the text. Solutions to half of the problems are provided.

Provides a modern, practical approach to the understanding and measurement procedures relevant to the fracture of brittle materials This book examines the testing and analysis of the fracture of brittle materials. Expanding on the measurement and analysis methodology contained in the first edition, it covers the relevant measurements (toughness and strength), material types, fracture mechanics, measurement techniques, reliability and lifetime predictions, microstructural considerations, and material/test selection processes appropriate for the analysis of the fracture behavior of brittle materials. The Fracture of Brittle Materials: Testing and Analysis, Second Edition summarizes the concepts behind the selection of a test procedure for fracture toughness and strength, and goes into detail on how the statistics of fracture can be used to assure reliability. It explains the importance of the role of microstructure in these determinations and emphasizes the use of fractographic analysis as an important tool in understanding why a part failed. The new edition includes a significant quantity of material related to the fracture of biomaterials, and features two new chapters—one on thermal shock, the other on the modeling of the fracture process. It also expands on a discussion of how to treat the statistics of fracture strength data to ensure reliability. Provides practical analysis of fracture toughness and strength Introduces the engineering and materials student to the basic concepts necessary for analyzing brittle fracture Contains new statistical analysis procedures to allow for the prediction of the safe design of brittle components Contains real-world examples to assist the reader in applying the concepts to their own research, material development, and quality-control needs The Fracture of Brittle Materials: Testing and Analysis, Second Edition is an important resource for all students, technicians, engineers, scientists, and researchers involved in the study, analysis, creation, or testing of ceramics.

Mechanics of Creep Brittle Materials-l was published in 1989 as the proceedings of a Colloquium held in Leicester in the summer of 1988. The Colloquium examined the creep response of a wide range of materials, including metals, engineering ceramics and ice, with the aim of determining similarities in the response of these materials and the way in which their behaviour is modelled. The proceedings were structured so as nature of the Colloquium, with papers to reflect the interdisciplinary grouped together largely on the basis of the phenomena being examined, rather than by class of material. Mechanics of Creep Brittle Materials-2 was held in Leicester in Septem ber 1991 to discuss advances made in our understanding of the response of creep brittle materials since the first Colloquium. The scope of the Colloquium was extended to include mineral salts, concrete and com posite systems. These proceedings are once more structured so that the reader can readily compare the response of different material systems and evaluate the suitability of the range of models presented to the materials he is interested in. In fact a number of papers directly compare the of a range of different materials with the aim of identifying behaviour general strategies for the testing and modelling of creeping materials.

In this book a new phenomenological approach to brittle medium fracture initiation under shock pulses is developped. It provides an opportunity to estimate fracture of media with and without macrodefects. A qualitative explanation is thus obtained for a number of principally important effects of high-speed dynamic fracture that cannot be clarified within the framework of previous approaches. It is possible to apply this new strategy to resolve applied problems of disintegration, erosion, and dynamic strength determination of structural materials. Specialists can use the methods described to determine critical characteristics of dynamic strength and optimal effective fracture conditions for rigid bodies. This book can also be used as a special educational course on deformation of materials and constructions, and fracture mechanics.