Statics And Strength Of Materials For Construction Engineering Technology And Architecture

This book provides students and industry professionals with the necessary statics and strength of materials background for more innovative approaches to particular fields of engineering technology, construction engineering and management, civil engineering, and architectural technology.

For courses in Statics, Strength of Materials, and Structural Principles in Architecture, Construction, and Engineering Technology. Statics and Strength of Materials for Architecture and Building Construction, Fourth Edition, offers students an accessible, visually oriented introduction to structural theory that doesn't rely on calculus. Instead, illustrations and examples of building frameworks and components enable students to better visualize the connection between theoretical concepts and the experiential nature of real buildings and materials. This new edition includes fully worked examples in each chapter, a companion website with extra practice problems, and expanded treatment of load tracing.

A valuable reference source, this richly illustrated, user-friendly text provides an informative introduction to structures, and appeals to architectural and building construction students' strong need for visual reinforcement. No calculus is required.

This textbook provides students with a foundation in the general procedures and principles of the mechanical design process. It introduces students to solving force systems, selecting components and determining resultants in equilibrium. Strength failures of various materials will also be presented. In addition, the author has includes information about how to -- analyze and solve problems involving force systems, components, resultants and equilibrium; determine center of gravity and centroids of members and objects; identify moment of inertia of objects; analyze simple structures under linear stress and strain; investigate the effects of torsion on shafts and springs; find the load, stress and deflection on beams; and analyze structures subjected to combined loading.

Statics and Strength of Materials for Construction, Engineering Technology, and Architecture: Theory, Analysis, and Application provides students and industry professionals with the necessary statics and strength of materials background for more innovative approaches to particular fields of engineering technology, construction engineering and management, civil engineering, and architectural technology. It presents an introduction to statics, a review of algebra and trigonometry, concepts of vectors, a classification of building structural systems, an overview of advanced topics in statics and strength of materials, and frameworks of real-world application projects. This book contains 19 chapters and discusses several topics related to statics and strength of materials, such as coplanar force systems; the equilibrium of particle and rigid bodies; design loads; beam and frame reactions; trusses; arches, cables, and pulleys; space force systems; centroid of areas; moment of inertia; friction; properties of materials; axial deformation; bending and shear stress; torsional stress; combined loading; stress transformation; deflection; and stress in columns. Each chapter includes an Instructor’s Solution Manual and Guide with instructional materials and comprehensive explanations of the related practice problems, critical thinking exercises, and application projects.

Unique in perspective, approach, and coverage, this book is written specifically to introduce architectural, construction and civil engineering technicians to elementary engineering concepts, design principles, and practices. Using a practical, non-classical, non-calculus approach, it combines -- in one volume -- full coverage of the statics, strengths of materials, and building structure analysis/design concepts that technicians must master for the demands of today's changing workplace. Provides nearly 180 examples and over 200 supporting illustrations and photographs, including photos of buildings under construction and in sequence. Contains a very comprehensive set of tables of structural products and their properties. For anyone studying or interested in architectural technology, architectural engineering technology, structural technology, structural engineering technology, civil engineering technology, construction engineering technology, or construction management.

The fourth edition ofApplied Statics and Strength of Materialspresents an elementary, analytical, and practical approach to the principles and physical concepts of statics and strength of materials. It is written at an appropriate mathematics level for engineering technology students, using algebra, trigonometry, and analytic geometry. A knowledge of calculus is not required for understanding the text or for working the problems. The book is intended primarily for use in two-year or four-year technology programs in engineering, construction, or architecture. Much of the material has been classroom tested in our Accreditation Board for Engineering and Technology (ABET) accredited engineering technology programs as well as in our American Council for Construction Education (ACCE) accredited construction technology program. The text can also serve as a concise reference guide for undergraduates in a first Engineering Mechanics (Statics) and/or Strength of Materials course in engineering programs. Although written primarily for the technology student, it could also serve as a valuable guide for practicing technologists and technicians as well as for those preparing for state licensing exams for professional registration in engineering, architecture, or construction. The emphasis of the book is on the mastery of basic principles, since it is this mastery that leads to successful solutions of real-life problems. This emphasis is achieved through abundant worked-out examples, a logical and methodical presentation, and a topical selection geared to student needs. The problem-solving method that we emphasize is a consistent, comprehensive, step-by-step approach. The principles and applications (both examples and problems) presented are applicable to many fields of engineering technology, among them civil, mechanical, construction, architectural, industrial, and manufacturing. This fourth edition was prepared with the objective of updating the content where necessary and rearranging and revising some of the material to enhance the teaching aspects of the text. While the primary unit system remains the U.S. Customary System, metric (SI) units continue to be used throughout the text, and the examples and problems reflect a mix of the two measurement systems. The homework problem sets have some additions and some deletions, and some other problems were revised. The book includes the following features: Each chapter is written to introduce more complex material gradually. Problems are furnished at the end of each chapter and are grouped and referenced to a specific section. These are then followed by a group of supplemental problems provided for review purposes. Generally, problems are arranged in order of increasing difficulty. A summary at the end of each chapter presents a thumbnail sketch of the important concepts presented in the chapter. Useful tables of properties of areas and conversion factors for U.S. Customary-SI conversion are printed inside the covers for easy access. Most chapters contain computer problems following the section problems. These problems require students to develop computer programs to solve problems pertinent to the topics of the chapter. Any appropriate computer software may be used. The computer problems are another tool with which to reinforce students' understanding of the concepts under consideration. Answers to selected problems are provided at the back of the text. The primary unit system in this book remains the U.S. Customary system. SI, however, is fully integrated in both the text and the problems. This is a time of transition between unit systems. Much of the new construction work in the public sector (particularly in the transportation field) now uses metric (SI) measurement; full conversion to SI in the technology field in the United States is inevitable and will undoubtedly occur eventually. Technicians and technologists must be familiar with both systems. To make the book self contained, design and analysis aids are furnished in an extensive appendix section. Both U.S. Customary and SI data are presented. Calculus-based proofs are introduced in the appendices. The Instructor's Manual includes complete solutions for all the end-of-chapter problems in the text. There is sufficient material in this book for two semesters of work in statics and strength of materials. In addition, by selecting certain chapters, topics, and problems, the instructor can adapt the book to other situations, such as separate courses in statics (or mechanics) and strength of materials. Thanks are extended to many colleagues, associates, and students who with their enthusiastic encouragement, insightful comments, and constructive criticisms have helped with the input for this edition. A special word of thanks goes to James F. Limbrunner, P.E., for his contributions to the text and help with proofreading and problem sets. Also, appreciation is extended to the reviewers for this edition for their help and constructive suggestions: Elliot Colchamiro, New York City Technical College, and Dorey Diab, Stark State College. And last, my thanks to Jane Limbrunner for her support, patience, and understanding during the term of this project. George F. Limbrunner

This text covers the topics of statics and strength of materials at a level that is appropriate for industrial technology and engineering technology programs, as well as for university-level courses for non-engineering majors such as architecture. The book uses U.S. Customary and SI units equally in worked examples and practice problems. Sections requiring calculus are included for professors who teach in accredited programs in the technologies; these sections are marked with asterisks and may be omitted, depending on the level of coverage required, without a loss of continuity in the text. Chapters I through 8 cover the topic of statics and include a review of unit conversions, trigonometry, and simultaneous equations. Chapters 9 through 18 are devoted to the study of strength of materials. The new edition also includes: "Application sidebars" scattered throughout the text containing photos and line art that integrate theory with practice in selected areas of construction and manufacturing A new section on residential design using tabulated values taken from the principal model building codes More than 200 worked examples, and over 950 practice problems in varying degrees of difficulty A new table of properties for MEL and MSR machine-graded lumber, with examples demonstrating their use