Structure And Concentration Of Point Defects In Selected Spinels And Simple Oxides

Structure and Concentration of Point Defects in Selected Spinels and Simple Oxides presents diagrams and numerical data of important properties of spinels and oxides based on experimental results published in the literature. The values of many parameters presented can be used for optimization of preparation of new systems, to predict the practical properties of these systems. Applications include electronic devices, new metallic alloys with improved corrosion resistance, new ceramic materials, and novel catalysts, particularly for oxygen evolution and reduction reactions. Organized into four comprehensive parts, the authors present the problem of the structure and concentration of ionic and electronic defects in magnetite and hausmannite, pure and doped with M3+ cations, and in spinels exhibiting magnetic properties and high electric conductance. Additional Features include: Includes 236 figures presenting equilibrium diagrams of point defects and other useful details related to stoichiometric and nonstoichiometric spinels and oxides. Details novel methods of calculation of equilibria involving point defects. Collects scattered data published in nearly 500 original articles since the 1950s on spinels and oxides in one useful volume. Building upon the data presented, this book is an indispensable reference for material scientists and engineers developing new metal or oxide-based systems can easily calculate other useful parameters and compare the properties of different materials to select the best candidates for an intended use.

Structure and Concentration of Point Defects in Selected Spinels and Simple Oxides presents diagrams and numerical data of important properties of spinels and oxides based on experimental results published in the literature. The values of many parameters presented can be used for optimization of preparation of new systems, to predict the practical properties of these systems. Applications include electronic devices, new metallic alloys with improved corrosion resistance, new ceramic materials, and novel catalysts, particularly for oxygen evolution and reduction reactions. Organized into four comprehensive parts, the authors present the problem of the structure and concentration of ionic and electronic defects in magnetite and hausmannite, pure and doped with M3+ cations, and in spinels exhibiting magnetic properties and high electric conductance. Additional Features include: Includes 236 figures presenting equilibrium diagrams of point defects and other useful details related to stoichiometric and nonstoichiometric spinels and oxides. Details novel methods of calculation of equilibria involving point defects. Collects scattered data published in nearly 500 original articles since the 1950s on spinels and oxides in one useful volume. Building upon the data presented, this book is an indispensable reference for material scientists and engineers developing new metal or oxide-based systems can easily calculate other useful parameters and compare the properties of different materials to select the best candidates for an intended use.

The properties of materials at high temperature play a vital role in their processing and practical use. The real properties of materials at elevated temperatures are very often governed by defects in their structure. Lattice defects may consist of point defects like vacancies, interstitial atoms or substituted atoms. These classes are discussed in general and specifically for oxides, nitrides, carbides and sulfides. Defect aggregates, shear structures and adaptive structures are also described. Special attention is paid to hydrogen defects which seem to play an important role in several materials.Defects in solids lead to transport properties such as diffusion and conductivity. These themes are thoroughly treated in this book, with examples from various materials being provided. Special attention is paid to the transport properties of grain boundaries. In high temperature corrosion and other types of oxidation, the diffusion of atoms through the reaction products is often the rate limiting step of the reaction. This book takes the reader from the theoretical treatment of defects to applications in high temperature corrosion. Reactions between metals and pure oxygen lead to the formation of oxides on the surface, and the reaction rates may often be related to the diffusion coefficients of the oxide. However, in practical use alloys are subjected to other severe gaseous atmospheres which may often lead to accelerated attack on the material. The severest condition, namely where a salt deposit is combined with oxidizing gases, is called hot corrosion. This and other types of corrosion are also covered. Finally, a chapter is devoted to the prevention of corrosive attack on materials by the addition of rare earth metals.The book has been published in honour of Professor Per Kofstad on the occasion of his 60th birthday. Professor Kofstad has for many years been active in the field of high temperature chemistry in all its aspects, from basic and theoretical work to its application in high temperature corrosion of metals and alloys. The various chapters have been contributed by his friends and colleagues, all of whom are international experts in the field.

The current book brings together cutting-edge research in the area of heterogeneous catalytic redox processes. The first part of the book covers the catalytic properties of transition metal oxides and the techniques for catalysts preparation, such as mechanochemistry, plasmochemistry, hydrothermal treatment, etc. Further the authors focus on mechanisms of heterogeneous redox reactions followed by the overview of industrial applications.

Annotation Every article from the 1987 edition has been reviewed, revised, expanded or updated! The purpose of ASM Handbook, Volume 13A: Corrosion: Fundamentals, Testing, and Protection is to help engineers and designers understand corrosion so that they can solve existing corrosion problems and prevent future ones. It should be the first book you select when researching a corrosion problem. The overage of the volume had been completely revised to ensure that it is the most comprehensive, practical, and up-to-date resource available. Each article is indexed to other appropriate sections of the Handbook, and each provides a road map to the thousand of individual bibliographical references that were used to compile the information. The editors have assembled over 120 leading authorities in the field of corrosion to review, revise, and contribute new articles to this volume. This volume replaces the landmark 1987 Metals Handbook volume on corrosion. In developing this new edition, the coverage of many of the topics has been greatly expanded. The volume has six major sections: Fundamentals of Corrosion, Forms of Corrosion, Corrosion Testing and Evaluation, Methods of Corrosion Protection, Designing for Corrosion Control and Prevention, and Tools for the Corrosionist.