Surface Acoustic Wave Devices

Surface acoustic wave (SAW) devices are widely used in mobile communications, a rapidly evolving market. This book gives an overview on the latest SAW technologies with an emphasis on the design and simulation of devices, such as resonator-based devices employing the SH-type leaky SAW.

Surface Acoustic Wave Devices and Their Signal Processing Applications is a textbook that combines experiment and theory in assessing the signal processing applications of surface acoustic wave (SAW) devices. The operating principles of SAW devices are described from a circuit design viewpoint. This book is comprised of 18 chapters and begins with a historical background on surface acoustic waves and a discussion on the merits of SAW devices as well as their applications. The next chapter introduces the reader to the basics of acoustic waves and piezoelectricity, together with the effect of acoustic bulk waves on the performance of SAW filters. The principles of linear phase SAW filter design and equivalent circuit models for a SAW filter are then described. The remaining chapters focus on trade-offs in linear phase SAW filter design; compensation for second-order effects; harmonic SAW delay lines for gigahertz frequencies; and coding techniques using linear SAW transducers. The final chapter highlights Some other significant alternative design techniques and applications for SAW devices. This monograph will be suitable for engineering or physics students as well as engineers, scientists, and technical staff in industry who seek further information on SAW-based circuits, systems, and applications.

Written for readers with or without surface acoustic wave (SAW) experience, this book covers a wide range of SAW filter- and device-design techniques as well as applications to mobile and wireless circuitry. It provides numerous references and worked examples on SAW devices to highlight various design aspects, and contains illustrations from many leading electronic companies around the world. The first half of the book covers the principles of SAW devices. The secondhalf focuses on applications to the mobile/wireless field, including SAW devices for antenna duplexers, RF and IF filters for cellular cordless phones, front-end filters for wireless transceivers, fixed and tunable oscillators, filters for on-board satellite communications, as well as coding and convolvers for indoor/outdoor spread-spectrum communications. Surface Acoustic Wave Devices for Mobile and Wireless Communications serves as an excellent sourcebook for engineers and designers with some SAW background, or for technical staff with no prior knowledge of SAW devices who need to know how this technology can help their products. It can be used as a textbook for senior and graduate students engaged in the study of signal processing techniques and systems for mobile communications. Key Features * First SAW text applied to mobile and wireless communications * Written by an award-winning researcher with over 20 years of SAW device experience * Presents the theory and design of major SAW devices for mobile/wireless communications as applied to some of the major telecommunication standards * Accessible to both engineering and scientific readers with or without prior SAW device knowledge

This book introduces acoustic wave theories using a reader-friendly matrix-based linear algebra approach. It will enable the reader to take advantage of software tools such as MATLAB (commercial codes) and OCTAVE (open-source codes) to gain better and deeper understanding of the underlying physics quickly. In this aspect, this text can be regarded as a practical introduction of the acoustic wave theories in an easy-to-follow linear algebra format using matrix manipulations instead of an abstract approach relying on tensor manipulations. The book also uses case studies to demonstrate how the fundamentals on acoustic waves discussed throughout the book are applied in device designs and analyses such that the connections and interdependences between the underlying sciences and the observed behavior and performances can be better appreciated by the reader. To achieve this, all problems for illustrations, examples, case studies, and device analyses are developed and solved based on the mathematical foundations laid out in the book.

Surface Acoustic Wave Filters gives the fundamental principles and device design techniques for surface acoustic wave filters. It covers the devices in widespread use today: bandpass and pulse compression filters, correlators and non-linear convolvers and resonators. The newest technologies for low bandpass filters are fully covered such as unidirectional transducers, resonators in impedance element filters, resonators in double-mode surface acoustic wave filters and transverse-coupled resonators using waveguides. The book covers the theory of acoustic wave physics, the piezoelectric effect, electrostatics at a surface, effective permittivity, piezoelectric SAW excitation and reception, and the SAW element factor. These are the main requirements for developing quasi-static theory, which gives a basis for the non-reflective transducers in transversal bandpass filters and interdigital pulse compression filters. It is also needed for the reflective transducers used in the newer devices. A thorough revision of a classic on surface acoustic wave filters first published in 1985 and still in print Uniquely combines easy-to-understand principles with practical design techniques for all the devices in widespread use today Complete coverage of all the latest devices which are key to mobile phones, TVs and radar systems Includes a new foreword by Sir Eric Albert Ash

Written by an interdisciplinary group of experts from both industry and academia, Acoustic Wave Sensors provides an in-depth look at the current state of acoustic wave devices and the scope of their use in chemical, biochemical, and physical measurements, as well as in engineering applications. Because of the inherent interdisciplinary applications of these devices, this book will be useful for the chemist and biochemist interested in the use and development ofthese sensors for specific applications; the electrical engineer involved in the design and improvement of these devices; the chemical engineer and the biotechnologist interested in using these devices for process monitoring and control; and the sensor community at large. Provides in-depth comparison and analyses of different types of acoustic wave devices Discusses operating principles and design considerations Includes table of relevant material constants for quick reference Presents an extensive review of current uses of these devices for chemical, biochemical, and physical measurements, and engineering applications

Surface acoustic wave (SAW) devices are recognized for their versatility and efficiency in controlling and processing electrical signals. This has resulted in a multitude of device concepts for a wide range of signal processing functions, such as delay lines, filters, resonators, pulse compressors, convolvers, and many more. As SAW technology has found its way into mass market products such as TV receivers, pagers, keyless entry systems and cellular phones, the production volume has risen to millions of devices produced every day. At the other end of the scale, these are specialized high performance signal processing SAW devices for satellite communication and military applications, such as radar and electronic warfare. This volume, together with Volume 1, presents an overview of recent advances in SAW technology, systems and applications by some of the foremost researchers in this exciting field. Contents: Coupling-of-Modes Analysis of SAW Devices (V Plessky & J Koskela); Theory and Applications of Green''s Functions (A R Baghai-Wadji); New Piezoelectric Substrates for SAW Devices (J Kosinski); Pseudo and High Velocity Pseudo SAWs (M P da Cunha); SAW Devices Beyond 5 GHz (H Odagawa & K Yamanouchi); Wireless SAW Identification and Sensor Systems (F Schmidt & G Scholl); Interaction of Surface Acoustic Waves, Electrons, and Light (A Wixforth). Readership: Graduate students, researchers and academics in device and circuit design, as well as designers of mobile communications systems.