Surface Effects And Contact Mechanics Including Tribology Xii

The book contains papers from the twelfth in a series of biennial conferences, first held in 1993, on the topics of contact mechanics and surface effects and their interaction. In general, structural components fail by wear, corrosion and fatigue, that is to say affected and initiated by surface conditions. Consequently, it is often appropriate to modify the surface layer of a base material or coat it, so as to provide an enhanced performance or longer life. However, in many cases it is the combined effect of wear and corrosion that is damaging, contributing to complexity in determining the proper approach. The surface treatment chosen should be suitably related to the problem to be solved. The necessary thickness of the coating depends largely on the applied loading and environmental conditions. The papers in the book address novel protective layers for advances in sliding wear and low friction. The contents cover topics such as: Experimental and Measurement Tests; Surface Modification; Surface Problems in Contact Mechanics; Thick and Thin Coatings; Tribomechanics; Computer Simulation.

Contact mechanics and surface effects, as well as their interaction, are important in modern engineering. The life and performance of structural components is affected by surface conditions such as wear, corrosion and, high cycle fatigue. Surface treatments that address contact conditions can reduce costs by extending the life of components. These are the subjects of a biennial conference first held in 1993, the papers from the latest of which are collected in this volume. The book discusses Computer simulation; Surface modification; Surface treatments; Surface problems in contact mechanics; Contact mechanics; Applications and case studies; Indentation and hardness; Thick and thin coatings; Corrosion problems; Nano-characterisation; Test methodology; Multiscale experiments and modelling; and Fracture fatigue and mechanics.

Tribology is the science of friction, lubrication and wear of moving components. Results obtained from tribology are used to reduce energy losses in friction pro cesses, to reduce material losses due to wear, and to increase the service life of components. Contact Mechanics plays an important role in Tribology. Contact Mechanics studies the stress and strain states of bodies in contact; it is contact that leads to friction interaction and wear. This book investigates a variety of contact problems: discrete contact of rough surfaces, the effect of imperfect elasticity and mechanical inhomogeneity of contacting bodies, models of friction and wear, changes in contact characteristics during the wear process, etc. The results presented in this book were obtained during my work at the Insti tute for Problems in Mechanics of the Russian Academy of Sciences. The first steps of this research were carried out under the supervision of Professor L. A. Galin who taught me and showed me the beauty of scientific research and solutions. Some of the problems included in the book were investigated together with my col leagues Dr. M. N. Dobychin, Dr. O. G. Chekina, Dr. I. A. Soldatenkov, and Dr. E. V. Tor skaya from the Laboratory of Friction and Wear (IPM RAS) and Prof. F. Sadeghi from Purdue University (West Lafayette, USA). I would like to express my thanks to them. I am very grateful to Professor G. M. L.

Containing the papers from the eleventh biennial conference on the topic, first held in 1993, this book covers contact mechanics and surface effects and their interaction, so important in modern engineering. The life and performance of structural components is affected by surface conditions such as wear, corrosion and, high cycle fatigue. Surface treatments that address contact conditions can reduce costs by extending the life of components. Hence the importance of the conference discussions.The book's papers cover such matters as Experimental and measurement tests; Fracture fatigue and mechanics; Surface modification; Surface problems in contact mechanics; Thick and thin coatings; Heat transfers; Multiscale experiments and modelling; Computer simulation; Biocompatible materials; Vacuum technologies; Residual stress problems; Tribomechanics; Case studies.

Experiments, and discusses the following topics: Surface treatments; Thick coatings; Thin coatings; Surface problems in contact mechanics; Indentation and hardness; Fatigue; Numerical analysis; Applications and case studies." --Book Jacket.

Discrete Contact Mechanics with Applications in Tribology presents new solutions to contact problems for elastic and viscoelastic bodies in normal, sliding, and rolling contact, taking into account effects such as surface microgeometry, adhesion, fluid films, and viscous hysteresis in bulk material or surface layers. These solutions are applied to problems in tribology for modeling contact and friction of bodies with surface microgeometry (rough or textured). The book provides exact mathematical formulations for cases of discrete contact based on classical approaches of contact mechanics, allowing readers to study the influence of different parameters of surface microgeometry on contact characteristics and friction force.The book will help solve problems in modeling contact and friction interaction in cases of discrete character of contact interaction, mutual influence of individual contact spots in contact interaction of elastic and viscoelastic solids, calculating sliding and rolling friction forces as a result of adhesive and viscoelastic mechanisms of dissipation, and more. Provides a raft of solutions to contact problems for elastic and viscoelastic materials in normal, sliding, and rolling contact Provides solutions and formulations that consider surface microgeometry, adhesion, fluid films, viscous hysteresis in bulk material or surface layers, and other common material effects Features applied methods based on classical contact mechanics approaches, allowing for analytic and half-analytic treatment of problems

The English edition of “Contact Mechanics and Friction” lying before you is, for st the most part, the text of the 1 German edition (Springer Publishing, 2009). The book was expanded by the addition of a chapter on frictional problems in ear- quake research. Additionally, Chapter 15 was supplemented by a section on elasto-hydrodynamics. The problem sections of several chapters were enriched by the addition of new examples. This book would not have been possible without the active support of J. Gray, who translated it from the German edition. I would like to thank Prof. G. G. - charyan and Prof. S. Sobolev for discussions and critical comments on the chapter over earthquake dynamics. Dr. R. Heise made significant contributions to the - velopment and correction of new problems. I would like to convey my affecti- ate thanks to Dr. J. Starcevic for her complete support during the composition of this book. I want to thank Ms. Ch. Koll for her patience in creating figures and Dr. R. Heise, M. Popov, M. Heß, S. Kürscher, and B. Grzemba for their help in pro- reading. Berlin, November 2009 V.L. Popov Preface to the German Edition