The Amateur Mechanic S Workshop By The Author Of The Lathe And Its Uses

In this invaluable guide to amateur mechanics, Lukin provides readers with a comprehensive introduction to the tools, techniques, and skills needed to build and repair a wide range of machinery. Drawing on his extensive experience as a mechanic and inventor, Lukin offers practical advice and helpful insights into every aspect of the craft. With clear explanations and step-by-step instructions, this book is an essential resource for anyone interested in the art and science of mechanical engineering. This work has been selected by scholars as being culturally important, and is part of the knowledge base of civilization as we know it. This work is in the "public domain in the United States of America, and possibly other nations. Within the United States, you may freely copy and distribute this work, as no entity (individual or corporate) has a copyright on the body of the work. Scholars believe, and we concur, that this work is important enough to be preserved, reproduced, and made generally available to the public. We appreciate your support of the preservation process, and thank you for being an important part of keeping this knowledge alive and relevant.

This historic book may have numerous typos and missing text. Purchasers can usually download a free scanned copy of the original book (without typos) from the publisher. Not indexed. Not illustrated. 1870 edition. Excerpt: ...with a 3in. crank and used with a treadle, being heavy enough to continue in motion, notwithstanding the pressure of the tool, even when the latter is a broad plane-iron. It is necessary to use water; consequently, the stone must have a trough beneath, and this should be hinged at the further end so that it can be elevated by a wedge beneath, or suspended at the free end. The water poured into this can thus be raised to touchu the stone when in use, and lowered out of contact when the grinding is finished. The stone must not be left to soak in the water. Attached to the frame of the grindstone, and capable of some little adjustment as to height and distance, must be a strong rest of wood or ironu to assist in supporting and keeping the tool firmly in position. The Fig. 99, from Holtzapffel, will show at once the best form of mounted grindstone for the amateur's use, although he may fit up one on a similar plau at a considerably lower price than is charged for the one shown. Let it be observed, however, that a stone badly mounted, and which does not run truly, is not only a disgrace to the owner but absolutely useless. The greatest care, therefore, should be used in first setting it up and in afterwards keeping it in order. If the amateur can spare time and a few extra shillings, let him by all means discard the clumsy square axle and wedges. Let the central hole be plugged with a piece of boxwood bored truly at right angles with the flat face of the stone with an augur, and let FIG.100 the round axle be made with a fixed and a movable flange, as in the Fig. 100, where A is the stone, B the axle, with flange (0) fixed, and a second (D) made with a central hole, to enable it to be screwed against the stone by the nut E. F F are washers of...

Reprint of the original, first published in 1874. The publishing house Anatiposi publishes historical books as reprints. Due to their age, these books may have missing pages or inferior quality. Our aim is to preserve these books and make them available to the public so that they do not get lost.

Vols. for 1871-76, 1913-14 include an extra number, The Christmas bookseller, separately paged and not included in the consecutive numbering of the regular series.