The Building Regulations 2000 B Vol 2 Buildings Other Than Dwellinghouses

Coming into effect 6 April 2007, when it replaces the 2000 edition (incorporating 2002 amendments) of approved document B (TSO ISBN 011703634X). Approved document B Vol. 2 Buildings other than dwellinghouses is also available (ISBN 0117037257). With addenda (8p., February 2007) which contains two text amendments and an index to the main work

Clay’s Handbook of Environmental Health, since its first publication in 1933, has provided a definitive guide for the environmental health practitioner or reference for the consultant or student. This twentieth edition continues as a first point of reference, reviewing the core principles, techniques and competencies, and then outlining the specialist subjects. It has been refocused on the current curriculum of the UK’s Chartered Institute of Environmental Health but should also readily suit the generalist or specialist working outside the UK.

The new Part L2B, will require a 25% improvement on the 2006 standards for every new home. An aggregate approach for improvements of new non-domestic buildings will deliver an improvement of 25% overall, rather than for each individual building. This is due to the fact that there is a greater variety amongst non-domestic buildings and some will be much easier than others to make efficient. The changes to Part L will increase the minimum levels of energy efficiency for building fabric and services, so that CO2 targets cannot be achieved through renewables alone. This reflects the principles of reducing overall demand for energy. The measures will also be relevant when people elect to carry out work to existing buildings including extensions and conversions, fabric renovations, replacement windows and boilers. This Approved Document L2B (2010) comes into force October 2010 in support of the Building Regulations 2000. The Approved Documents provide technical guidance on ways of complying with the Building Regulations. They are continuously revised in line with new legislations

Building Regulations 2000

Andrew Furness and Martin Muckett give an introduction to all areas of fire safety management, including the legal framework, causes and prevention of fire and explosions, fire protection measures, fire risk assessment, and fire investigation. Fire safety is not treated as an isolated area but linked into an effective health and safety management system. Introduction to Fire Safety Management has been developed for the NEBOSH Certificate in Fire Safety and Risk Management and is also suitable for other NVQ level 3 and 4 fire safety courses. The text is highly illustrated in full colour, easy to read and supported by checklists, report forms and record sheets. This practical approach makes the book a valuable reference for health and safety professionals, fire officers, facility managers, safety reps, managers, supervisors and HR personnel in companies, as well as fire safety engineers, architects, construction managers and emergency fire services personnel. Andrew Furness CFIOSH, GIFireE, Dip2OSH, MIIRSM, MRSH, is Managing Director of Salvus Consulting Limited who specialise in Fire Safety. He was the chairman of the NEBOSH / IOSH working party that developed the NEBOSH Fire Safety and Risk Management certificate. Martin Muckett MA, MBA, CMIOSH, MIFireE, Dip2OSH, former Principal Health and Safety Advisor to The Fire Service Inspectorate and Principal Fire Safety Officer, Martin is currently Salvus Consulting Limited’s Senior Fire Safety Trainer / Consultant.

In 2010 the then current European national standards for building and construction were replaced by the EN Eurocodes, a set of pan-European model building codes developed by the European Committee for Standardization. The Eurocodes are a series of 10 European Standards (EN 1990 – EN 1999) that provide a common approach for the design of buildings, other civil engineering works and construction products. The design standards embodied in these Eurocodes will be used for all European public works and are set to become the de-facto standard for the private sector in Europe, with probable adoption in many other countries. This classic manual on structural steelwork design was first published in 1955, since when it has sold many tens of thousands of copies worldwide. For the seventh edition of the Steel Designers' Manual all chapters have been comprehensively reviewed, revised to ensure they reflect current approaches and best practice, and brought in to compliance with EN 1993: Design of Steel Structures (the so-called Eurocode 3).

This Generic Risk Assessment examines the hazards, risks and control measures relating to Fire and Rescue Service personnel, the personnel of other agencies and members of the public when Service personnel are fighting fires in buildings. It assesses the issues which may be present from the building structure itself, to the contents and the tasks undertaken by firefighting crews.