The Metal Lathe

Using castings from your charcoal foundry (see Book 1 in the series: The Charcoal Foundry by David Gingery) and simple hand methods (no machine tools needed!) you can build a sturdy and accurate bed for a metal lathe. Then additional castings, common hardware items and improvised equipment will add the headstock, tailstock, carriage and all the remaining parts to complete the lathe. Illustrated with photos and drawings to show you all you need to know about patterns, molding, casting and finishing the parts. The lathe specs. include a 7" swing over the bed and 12" between centers. Adjustable tailstock with set-over for taper turning. Adjustable gibs in sliding members and adjustable sleeve bearings in the headstock. A truly practical machine capable of precision work. Once you have a foundry to cast the parts and a lathe to machine them you can tackle more exotic projects.

· An introduction and project-based course to the lathe and lathe metalworking · Contains 12 projects that start with basic tasks and progress into advanced skills · Projects are heavily illustrated with drawings and photographs · Great practice for both beginners and experienced lathe owners

The lathe is an essential tool for all but the most basic of workshops. It enables the engineer to produce turned components to a high degree of accuracy. Often called the 'king of machine tools', it is also very versatile and can be used to make a wide range of engineering components. This new book shows you how to make full use of your lathe safely and effectively in your workshop. Topics covered include: A guide to choosing a lathe looking at different sizes and features available; Advice on installing and maintaining a lathe, selecting and sharpening tools, and working with chucks; Instruction on a range of techniques ranging from how to hold work in a collet through to cutting a screw thread. A new and practical guide to this essential tool, the lathe, aimed at both the aspiring and experienced engineers, modelmakers and horologists, Metal Turning on the Lathe gives advice on choosing, installing, maintaining and using a lathe safely and effectively in your workshop and is superbly illustrated with 239 colour illustrations. David Clark has spent over 30 years in the engineering industry and is the editor of Model Engineer and Model Engineers' Workshop.

This handbook is a guide to indexable or "insert" tooling for use on medium-sized (10"-14") metal lathes. It pulls together the relevant information every metal lathe user should know and understand about indexable tooling and carbide inserts. The material is presented in a logical and tutorial manner and includes extensive field-tested recommendations for indexable tools, carbide inserts, and best practices for their use. For newcomers to the world of carbide inserts and toolholders, this handbook offers practical suggestions on what tools to buy to get started and how to expand your tool collection over time. And if you already own indexable tooling, this handbook will take help you decipher insert characteristics, and eliminate confusion when buying the correct insert for the job at hand. For less than the cost of a package of carbide inserts or a single indexable tool, this handbook can be your guide to selecting indexable tooling and inserts with confidence. The field of indexable tooling is complex, murky, and poorly explained for someone who is not a professional tooling engineer. Much of the available printed and online information is steeped in seemingly endless code-words, acronyms, and secret recipes. This handbook cuts through all this complexity and distills the information for novice and experienced machinists alike. There are four main sections to this handbook: The basics of indexable tooling terminology are covered, with specific suggestions on what tools to buy if just getting started, along with extensive lists of tools to round out your collection based on your experience level, types of projects you tackle, and your budget. The section on carbide inserts draws on many sources of information and helps the small shop user make informed and confident decisions when choosing or buying an insert for a particular project. Each lathe tool category is covered in-depth, along with specific recommendations for tools and inserts for turning/facing, threading, parting/cut-off, and boring. The final section demystifies the alphabet soup used to distinguish and specify carbide inserts and toolholders. Also included is information on feeds and speeds, quick-change tool post and tool holder selection, sources of supply, and a glossary of terms.

Build your own Metal Shaper. Exotic is a mild adjective when applied to this shaper. It will cut splines, keyways, gears, sprockets, dovetail slides, flat and angular surfaces and irregular profiles. And all of these with a simple hand-ground lathe tool bit. Obsolete in modern industry, of course, because milling machines do the work much faster and cheaper. But you can’t beat a shaper for simplicity and economy in the home shop.The shaper has a 6" stroke and a mean capacity of 5" x 5", variable and adjustable stroke length, automatic variable cross feed and graduated collars. You will be proud to add this machine to your shop.

The mini-lathe is a useful tool in the model engineer's workshop. With more choice than ever of more compact machines, a mini-lathe is able to accommodate a wide range of engineering requirements, projects and techniques, as well as being suitable for the novice engineer and for those with limited workshop space. Author and model engineer Neil Wyatt provides a practical guide to purchasing and using a mini-lathe, as well as examining more advanced techniques. The book includes a projects section to show the application of mini-lathe techniques. Topics covered include: choosing a mini-lathe; workshop safety and setting up the lathe; basic through to more advanced machining skills; modifications, additions and tuning of the mini-lathe. This essential reference source is aimed at the novice engineer, home metalworkers and for those with limited workshop space. Fully illustrated with 304 colour photographs.

This book follows on from the author's introduction to the mini-lathe (Mini-Lathe for Home Machinists by David Fenner, also available from Fox Chapel Publishing) and presents a series of projects that will help to extend the versatility of small metal lathes.