The Tolerability Of Risk From Nuclear Power Stations

This document replaces the statement and proposals made in the discussion document Tolerability of Risk form Nuclear Power Stations published in 1988. It represents a revision of the earlier document in the light of comments received and of the discussion on the document during the Hinkley Point Inquiry and in the Inquiry report.

Over the last three decades the process industries have grown very rapidly, with corresponding increases in the quantities of hazardous materials in process, storage or transport. Plants have become larger and are often situated in or close to densely populated areas. Increased hazard of loss of life or property is continually highlighted with incidents such as Flixborough, Bhopal, Chernobyl, Three Mile Island, the Phillips 66 incident, and Piper Alpha to name but a few. The field of Loss Prevention is, and continues to, be of supreme importance to countless companies, municipalities and governments around the world, because of the trend for processing plants to become larger and often be situated in or close to densely populated areas, thus increasing the hazard of loss of life or property. This book is a detailed guidebook to defending against these, and many other, hazards. It could without exaggeration be referred to as the "bible" for the process industries. This is THE standard reference work for chemical and process engineering safety professionals. For years, it has been the most complete collection of information on the theory, practice, design elements, equipment, regulations and laws covering the field of process safety. An entire library of alternative books (and cross-referencing systems) would be needed to replace or improve upon it, but everything of importance to safety professionals, engineers and managers can be found in this all-encompassing reference instead. Frank Lees' world renowned work has been fully revised and expanded by a team of leading chemical and process engineers working under the guidance of one of the world’s chief experts in this field. Sam Mannan is professor of chemical engineering at Texas A&M University, and heads the Mary Kay O’Connor Process Safety Center at Texas A&M. He received his MS and Ph.D. in chemical engineering from the University of Oklahoma, and joined the chemical engineering department at Texas A&M University as a professor in 1997. He has over 20 years of experience as an engineer, working both in industry and academia. New detail is added to chapters on fire safety, engineering, explosion hazards, analysis and suppression, and new appendices feature more recent disasters. The many thousands of references have been updated along with standards and codes of practice issued by authorities in the US, UK/Europe and internationally. In addition to all this, more regulatory relevance and case studies have been included in this edition. Written in a clear and concise style, Loss Prevention in the Process Industries covers traditional areas of personal safety as well as the more technological aspects and thus provides balanced and in-depth coverage of the whole field of safety and loss prevention. * A must-have standard reference for chemical and process engineering safety professionals * The most complete collection of information on the theory, practice, design elements, equipment and laws that pertain to process safety * Only single work to provide everything; principles, practice, codes, standards, data and references needed by those practicing in the field

There is an increasing dissatisfaction about how risk is regulated, leading to vivid debates about the use of 'risk assessment' and 'precaution'. As a result, academics, government officials and industry leaders are calling for new approaches and fresh ideas. This book provides a historical and topical perspective on the alternative concept of 'Tolerability of Risk' and its concrete regulatory applications. In the UK, Tolerability of Risk has been developed into a sophisticated framework, particularly within the health and safety sectors. It is expected to guide decision-makers when applying their legal obligation of keeping risks as low as practically reasonable. Could Tolerability of Risk become a wider source of inspiration across the full scope of risk analysis and management? Written by leading academics and risk practitioners from industry and government, The Tolerability of Risk presents a summary of theoretical perspectives on risk approaches, providing a detailed elicitation of the methods and approaches used to build the Tolerability of Risk framework and examining the prospect of universal application of that framework. From nuclear power to environmental pollution, climate change and drug testing, the Tolerability of Risk framework may offer a workable, pragmatic solution for balancing risks against the costs involved in controlling them, as well as developing the institutional capacity to make effective decisions in all jurisdictions worldwide.

This book is a practical guide to the international, EC and UK law applying to the various uses of nuclear energy and radioactive substances. The first edition was produced in 1997, and given the renaissance of interest in nuclear power in the UK and worldwide, this new, updated and much expanded edition is timely. It will cover the law relating to the permitting and operation of nuclear power stations, the decommissioning and clean-up of former nuclear facilities, radiological protection, the management of radioactive waste and spent fuel, liability and insurance, and the security and transport of radioactive materials. Readers will find a clear framework explaining the development and application of nuclear law, and how domestic law is based on and influenced by international and European requirements and by its historical context. In the commercial context, the chapters dealing specifically with new build and with decommissioning will be vital reading.

Plant life management (PLiM) is a methodology focussed on the safety-first management of nuclear power plants over their entire lifetime. It incorporates and builds upon the usual periodic safety reviews and licence renewals as part of an overall framework designed to assist plant operators and regulators in assessing the operating conditions of a nuclear power plant, and establishing the technical and economic requirements for safe, long-term operation. Understanding and mitigating ageing in nuclear power plants critically reviews the fundamental ageing-degradation mechanisms of materials used in nuclear power plant structures, systems and components (SSC), along with their relevant analysis and mitigation paths, as well as reactor-type specific PLiM practices. Obsolescence and other less obvious ageing-related aspects in nuclear power plant operation are also examined in depth. Part one introduces the reader to the role of nuclear power in the global energy mix, and the importance and relevance of plant life management for the safety regulation and economics of nuclear power plants. Key ageing degradation mechanisms and their effects in nuclear power plant systems, structures and components are reviewed in part two, along with routes taken to characterise and analyse the ageing of materials and to mitigate or eliminate ageing degradation effects. Part three reviews analysis, monitoring and modelling techniques applicable to the study of nuclear power plant materials, as well as the application of advanced systems, structures and components in nuclear power plants. Finally, Part IV reviews the particular ageing degradation issues, plant designs, and application of plant life management (PLiM) practices in a range of commercial nuclear reactor types. With its distinguished international team of contributors, Understanding and mitigating ageing in nuclear power plants is a standard reference for all nuclear plant designers, operators, and nuclear safety and materials professionals and researchers. Introduces the reader to the role of nuclear power in the global energy mix Reviews the fundamental ageing-degradation mechanisms of materials used in nuclear power plant structures, systems and components (SSC) Examines topics including elimination of ageing effects, plant design, and the application of plant life management (PLiM) practices in a range of commercial nuclear reactor types

Covers advances in nuclear fuel handling and fuel management and assesses their impact in increasing reactor availability

The 25 papers collected together in this volume present comprehensive coverage of all major aspects of landslide risk assessment, including the risk assessment framework, and methods for estimating probability of landsliding vulnerability and risk.