Thermal And Electro Thermal System Simulation

With increasing power levels and power densities in electronics systems, thermal issues are becoming more and more critical. The elevated temperatures result in changing electrical system parameters, changing the operation of devices, and sometimes even the destruction of devices. To prevent this, the thermal behavior has to be considered in the design phase. This can be done with thermal end electro-thermal design and simulation tools. This Special Issue of Energies, edited by two well-known experts of the field, Prof. Marta Rencz, Budapest University of Technology and Economics, and by Prof. Lorenzo Codecasa, Politecnico di Milano, collects twelve papers carefully selected for the representation of the latest results in thermal and electro-thermal system simulation. These contributions present a good survey of the latest results in one of the most topical areas in the field of electronics: The thermal and electro-thermal simulation of electronic components and systems. Several papers of this issue are extended versions of papers presented at the THERMINIC 2018 Workshop, held in Stockholm in the fall of 2018. The papers presented here deal with modeling and simulation of state-of-the-art applications that are highly critical from the thermal point of view, and around which there is great research activity in both industry and academia. Contributions covered the thermal simulation of electronic packages, electro-thermal advanced modeling in power electronics, multi-physics modeling and simulation of LEDs, and the characterization of interface materials, among other subjects.

With increasing power levels and power densities in electronics systems, thermal issues are becoming more and more critical. The elevated temperatures result in changing electrical system parameters, changing the operation of devices, and sometimes even the destruction of devices. To prevent this, the thermal behavior has to be considered in the design phase. This can be done with thermal end electro-thermal design and simulation tools. This Special Issue of Energies, edited by two well-known experts of the field, Prof. Marta Rencz, Budapest University of Technology and Economics, and by Prof. Lorenzo Codecasa, Politecnico di Milano, collects twelve papers carefully selected for the representation of the latest results in thermal and electro-thermal system simulation. These contributions present a good survey of the latest results in one of the most topical areas in the field of electronics: The thermal and electro-thermal simulation of electronic components and systems. Several papers of this issue are extended versions of papers presented at the THERMINIC 2018 Workshop, held in Stockholm in the fall of 2018. The papers presented here deal with modeling and simulation of state-of-the-art applications that are highly critical from the thermal point of view, and around which there is great research activity in both industry and academia. Contributions covered the thermal simulation of electronic packages, electro-thermal advanced modeling in power electronics, multi-physics modeling and simulation of LEDs, and the characterization of interface materials, among other subjects.

This book, edited by Prof. Marta Rencz and Prof Andras Poppe, Budapest University of Technology and Economics, and by Prof. Lorenzo Codecasa, Politecnico di Milano, collects fourteen papers carefully selected for the “thermal and electro-thermal system simulation” Special Issue of Energies. These contributions present the latest results in a currently very “hot” topic in electronics: the thermal and electro-thermal simulation of electronic components and systems. Several papers here proposed have turned out to be extended versions of papers presented at THERMINIC 2019, which was one of the 2019 stages of choice for presenting outstanding contributions on thermal and electro-thermal simulation of electronic systems. The papers proposed to the thermal community in this book deal with modeling and simulation of state-of-the-art applications which are highly critical from the thermal point of view, and around which there is great research activity in both industry and academia. In particular, contributions are proposed on the multi-physics simulation of families of electronic packages, multi-physics advanced modeling in power electronics, multiphysics modeling and simulation of LEDs, batteries and other micro and nano-structures.

This book provides the reader with a complete methodology and software environment for creating efficient dynamic compact models for electro-thermal MEMS devices. It supplies the basic knowledge and understanding for using model order reduction at the engineering level. This tutorial is written for MEMS engineers and is enriched with many case studies which equip readers with the know-how to facilitate the simulation of a specific problem.

Faced with an ever-growing resource scarcity and environmental regulations, the last 30 years have witnessed the rapid development of various renewable power sources, such as wind, tidal, and solar power generation. The variable and uncertain nature of these resources is well-known, while the utilization of power electronic converters presents new challenges for the stability of the power grid. Consequently, various control and operational strategies have been proposed and implemented by the industry and research community, with a growing requirement for flexibility and load regulation placed on conventional thermal power generation. Against this background, the modelling and control of conventional thermal engines, such as those based on diesel and gasoline, are experiencing serious obstacles when facing increasing environmental concerns. Efficient control that can fulfill the requirements of high efficiency, low pollution, and long durability is an emerging requirement. The modelling, simulation, and control of thermal energy systems are key to providing innovative and effective solutions. Through applying detailed dynamic modelling, a thorough understanding of the thermal conversion mechanism(s) can be achieved, based on which advanced control strategies can be designed to improve the performance of the thermal energy system, both in economic and environmental terms. Simulation studies and test beds are also of great significance for these research activities prior to proceeding to field tests. This Special Issue will contribute a practical and comprehensive forum for exchanging novel research ideas or empirical practices that bridge the modelling, simulation, and control of thermal energy systems. Papers that analyze particular aspects of thermal energy systems, involving, for example, conventional power plants, innovative thermal power generation, various thermal engines, thermal energy storage, and fundamental heat transfer management, on the basis of one or more of the following topics, are invited in this Special Issue: • Power plant modelling, simulation, and control; • Thermal engines; • Thermal energy control in building energy systems; • Combined heat and power (CHP) generation; • Thermal energy storage systems; • Improving thermal comfort technologies; • Optimization of complex thermal systems; • Modelling and control of thermal networks; • Thermal management of fuel cell systems; • Thermal control of solar utilization; • Heat pump control; • Heat exchanger control.

Thermal System Design and Simulation covers the fundamental analyses of thermal energy systems that enable users to effectively formulate their own simulation and optimal design procedures. This reference provides thorough guidance on how to formulate optimal design constraints and develop strategies to solve them with minimal computational effort. The book uniquely illustrates the methodology of combining information flow diagrams to simplify system simulation procedures needed in optimal design. It also includes a comprehensive presentation on dynamics of thermal systems and the control systems needed to ensure safe operation at varying loads. Designed to give readers the skills to develop their own customized software for simulating and designing thermal systems, this book is relevant for anyone interested in obtaining an advanced knowledge of thermal system analysis and design. Contains detailed models of simulation for equipment in the most commonly used thermal engineering systems Features illustrations for the methodology of using information flow diagrams to simplify system simulation procedures Includes comprehensive global case studies of simulation and optimization of thermal systems

This book, edited by Prof. Marta Rencz and Prof Andras Poppe, Budapest University of Technology and Economics, and by Prof. Lorenzo Codecasa, Politecnico di Milano, collects fourteen papers carefully selected for the “thermal and electro-thermal system simulation” Special Issue of Energies. These contributions present the latest results in a currently very “hot” topic in electronics: the thermal and electro-thermal simulation of electronic components and systems. Several papers here proposed have turned out to be extended versions of papers presented at THERMINIC 2019, which was one of the 2019 stages of choice for presenting outstanding contributions on thermal and electro-thermal simulation of electronic systems. The papers proposed to the thermal community in this book deal with modeling and simulation of state-of-the-art applications which are highly critical from the thermal point of view, and around which there is great research activity in both industry and academia. In particular, contributions are proposed on the multi-physics simulation of families of electronic packages, multi-physics advanced modeling in power electronics, multiphysics modeling and simulation of LEDs, batteries and other micro and nano-structures.

This useful book addresses electrothermal problems in modern VLSI systems. It discusses electrothermal phenomena and the fundamental building blocks that electrothermal simulation requires. The authors present three important applications of VLSI electrothermal analysis: temperature-dependent electromigration diagnosis, cell-level thermal placement, and temperature-driven power and timing analysis.