Thermal Power Plants Volume I

Thermal Power Plants theme is a component of Encyclopedia of Energy Sciences, Engineering and Technology Resources in the global Encyclopedia of Life Support Systems (EOLSS), which is an integrated compendium of twenty Encyclopedias. The Theme on Thermal Power Plants presents three main topics which are then expanded into multiple subtopics, each as a chapter. The first topic covers the basic theory including fossil fuel combustion, nuclear fission, thermal fluids and thermodynamic cycles. It then deals with those aspects important to the maintenance of high efficiency and good reliability such as exergy analysis, material characteristics and life extension. The second topic deals with the production of steam. Although this is only the heat receiving part of the steam cycle it is consistent with the general layout of the power plant where the fossil fuel fired boiler or nuclear fission reactor is a separate and distinct part with its own ancilliary equipment. Fossil boilers and nuclear reactors both produce steam but are so different that each is covered separately in its respective series of chapters. The third topic deals with the generation of power utilizing the steam produced in the boiler or reactor. Several chapters cover steam turbine design and operation. Since power must be produced to exactly match the demand, consideration is given to operational constraints and protective devices. Heat rejection in cooling towers is important where no large body of water exists and is addressed in one chapter. Gas turbines are used for peak power generation and, with steam turbines, for combined cycle plants so are dealt with in two chapters. Conversion of mechanical power from the turbine to electrical power for distribution to the consumer is an important aspect and is covered by the last chapter. These three volumes are aimed at the following five major target audiences: University and College Students Educators, Professional Practitioners, Research Personnel and Policy Analysts, Managers, and Decision Makers, NGOs and GOs.

Thermal Power Pants (Volume III) has been derived from the work of several professors in the nuclear and power industry all of whom have been directly involved with the industry as managers or consultants. The text has been written as educational material and many of the individual chapters have been written as course material for advanced university courses. Also several chapters include material related to plant operation which is prescribed for operator training. Hence it bridges the gap between academic study and practical training. While it is not intended to be comprehensive in all respects it does provide an overview of the topic with sufficient technical depth for a general understanding of power plant technology and a basis for further study in a particular area. When used as a reference in this way each chapter can stand alone and be read independently of the others. Overall it meets the general philosophy of EOLSS in providing a source of knowledge for sustainable development and technological progress for educators and decision makers

Thermal Power Plant: Design and Operation deals with various aspects of a thermal power plant, providing a new dimension to the subject, with focus on operating practices and troubleshooting, as well as technology and design. Its author has a 40-long association with thermal power plants in design as well as field engineering, sharing his experience with professional engineers under various training capacities, such as training programs for graduate engineers and operating personnel. Thermal Power Plant presents practical content on coal-, gas-, oil-, peat- and biomass-fueled thermal power plants, with chapters in steam power plant systems, start up and shut down, and interlock and protection. Its practical approach is ideal for engineering professionals. Focuses exclusively on thermal power, addressing some new frontiers specific to thermal plants Presents both technology and design aspects of thermal power plants, with special treatment on plant operating practices and troubleshooting Features a practical approach ideal for professionals, but can also be used to complement undergraduate and graduate studies

This book has been derived from the work of several professors in the nuclear and power industry all of whom have been directly involved with the industry as managers or consultants. The text has been written as educational material and many of the individual chapters have been written as course material for advanced university courses. Also several chapters include material related to plant operation which is prescribed for operator training. Hence it bridges the gap between academic study and practical training. While it is not intended to be comprehensive in all respects it does provide an overview of the topic with sufficient technical depth for a general understanding of power plant technology and a basis for further study in a particular area. When used as a reference in this way each chapter can stand alone and be read independently of the others. Overall it meets the general philosophy of EOLSS in providing a source of knowledge for sustainable development and technological progress for educators and decision makers

This book explains the modelling and simulation of thermal power plants, and introduces readers to the equations needed to model a wide range of industrial energy processes. Also featuring a wealth of illustrative, real-world examples, it covers all types of power plants, including nuclear, fossil-fuel, solar and biomass. The book is based on the authors’ expertise and experience in the theory of power plant modelling and simulation, developed over many years of service with EDF. In more than forty examples, they demonstrate the component elements involved in a broad range of energy production systems, with detailed test cases for each chemical, thermodynamic and thermo-hydraulic model. Each of the test cases includes the following information: • component description and parameterization data; • modelling hypotheses and simulation results; • fundamental equations and correlations, with their validity domains; • model validation, and in some cases, experimental validation; and • single-phase flow and two-phase flow modelling equations, which cover all water and steam phases. A practical volume that is intended for a broad readership, from students and researchers, to professional engineers, this book offers the ideal handbook for the modelling and simulation of thermal power plants. It is also a valuable aid in understanding the physical and chemical phenomena that govern the operation of power plants and energy processes.

Thermal power plants are significant process industries for engineering specialists. The power sector has been facing several crucial issues over the past few years. The primary challenge is to meet the increasing power demand in a sustainable and efficient manner. Practicing power plant engineers not only look after the maintenance and operations of the plant, but also look after a variety of activities like research and development, starting from power generation to the environmental evaluation of the power plants. This book discusses features, operational matters, advantages and limitations of power plants, as well as the benefits of renewable power generation. It also elucidates thermal performance evaluation, fuel combustion matters, performance monitoring and modeling, component fault diagnosis and prognosis, functional analysis, economics of plant operation and maintenance, and environmental facets. This book discusses numerous issues related to both coal fired and gas turbine power plants. It will be beneficial for undergraduate and research oriented students, and for engineers working in power plants.

Thermal Power Plants: Modeling, Control, and Efficiency Improvement explains how to solve highly complex industry problems regarding identification, control, and optimization through integrating conventional technologies, such as modern control technology, computational intelligence-based multiobjective identification and optimization, distributed computing, and cloud computing with computational fluid dynamics (CFD) technology. Introducing innovative methods utilized in industrial applications, explored in scientific research, and taught at leading academic universities, this book: Discusses thermal power plant processes and process modeling, energy conservation, performance audits, efficiency improvement modeling, and efficiency optimization supported by high-performance computing integrated with cloud computing Shows how to simulate fossil fuel power plant real-time processes, including boiler, turbine, and generator systems Provides downloadable source codes for use in CORBA C++, MATLAB®, Simulink®, VisSim, Comsol, ANSYS, and ANSYS Fluent modeling software Although the projects in the text focus on industry automation in electrical power engineering, the methods can be applied in other industries, such as concrete and steel production for real-time process identification, control, and optimization.