Adhesion International 1993

First published in 1996. ADHESION INTERNATIONAL 1993 is a volume of the Proceedings of the 16th Annual Meeting of The Adhesion Society, Inc. Williamsburg, Virginia, USA February 21-26,1993. This meeting featured an International Symposium on The Interphase. Interphases are extremely important in many areas of technology. They are formed when dissimilar materials are joined and they control the properties of adhesive joints, composites, coatings, and microelectronics devices. Considering the importance and scope of phenomena associated with the interphase, it was appropriate to convene such a symposium at the meeting.

First published in 1996. ADHESION INTERNATIONAL 1993 is a volume of the Proceedings of the 16th Annual Meeting of The Adhesion Society, Inc. Williamsburg, Virginia, USA February 21-26,1993. This meeting featured an International Symposium on The Interphase. Interphases are extremely important in many areas of technology. They are formed when dissimilar materials are joined and they control the properties of adhesive joints, composites, coatings, and microelectronics devices. Considering the importance and scope of phenomena associated with the interphase, it was appropriate to convene such a symposium at the meeting.

This book chronicles the proceedings of the Second International Symposium on Polymer Surface Modification: Relevance to Adhesion held Newark, New Jersey, May 24--26, 1999. Polymeric materials are intrinsically not very adhesionable and this necessitates their surface treatment to enhance their adhesion characteristics to other materials. Since the first symposium on this topic, held in 1993, there has been a tremendous R&D activity in devising novel or ameliorating the existing techniques for surface modification of polymers. This volume contains a total of 32 papers, which have been rigorously peer-reviewed and suitably revised before inclusion in this volume. The book is divided into three parts as follows. Part 1: Plasma Surface Modification Techniques; Part 2: Other/Miscellaneous Surface Modification Techniques; and Part 3: General Papers. The topics covered include: plasma surface modification of a variety of polymers using various plasma gases; atmospheric plasma system; surface functionalization; ultrahydrophobic polymeric surfaces; metallization of plasma treated polymers; surface modification of polymers via molecular design for adhesion promotion; wet chemical methods for polymer surface modification; laser surface modification of various polymers; UV/ozone treatment; surface and interface studies of treated polymer surfaces by an array of techniques; bioadhesion of polymeric biomaterials to tissue; polymer-fiber systems; and plasma deposited coatings.

This Festschrift documents the Proceedings of the First International Congress on Adhesion Science and Technology, held in honor of Dr. Kash Mittal on the occasion of his 50 birthday, in Amsterdam, The Netherlands, October 16-20, 1995. It contains the full accounts of the plenary and invited lectures, which are divided into the following seven parts: Part 1: Fundamental aspects of adhesion and general topics; Part 2: Contact angle, wettability and surface energetics; Part 3: Surface modification: Relevance to adhesion; Part 4: Adhesives and adhesive joints; Part 5: Adhesion aspects of polymeric coatings, and polymer-polymer interphase; Part 6: Metal-polymer and metal-ceramic adhesion; and Part 7: General papers. The topics covered include many different aspects of adhesion science and technology, and both fundamental and applied issues are addressed. The final section of this volume gives a listing of titles, authors and affiliations of the other 185 papers which were included in the technical program of the conference.

Handbook of Thermoset Plastics, Fourth Edition provides complete coverage of the chemical processes, manufacturing techniques and design properties of each polymer, along with its applications. This new edition has been expanded to include the latest developments in the field, with new chapters on radiation curing, biological adhesives, vitrimers, and 3D printing. This detailed handbook considers the practical implications of using thermoset plastics and the relationships between processing, properties and applications, as well as analyzing the strengths and weakness of different methods and applications. The aim of the book is to help the reader to make the right decision and take the correct action on the basis of informed analysis – avoiding the pitfalls the authors’ experience has uncovered. In industry, the book supports engineers, scientists, manufacturers and R&D professionals working with plastics. The information included will also be of interest to researchers and advanced students in plastics engineering, polymer chemistry, adhesives and coatings. Offers a systematic approach, guiding the reader through chemistry, processing methods, properties and applications of thermosetting polymers Includes thorough updates that discuss current practice and the new developments on biopolymers, nanotechnology, 3D printing, radiation curing and biological adhesives Uses case studies to demonstrate how particular properties make different polymers suitable for different applications Covers end-use and safety considerations

Adhesives have been used for thousands of years, but until 100 years ago, the vast majority was from natural products such as bones, skins, fish, milk, and plants. Since about 1900, adhesives based on synthetic polymers have been introduced, and today, there are many industrial uses of adhesives and sealants. It is difficult to imagine a product—in the home, in industry, in transportation, or anywhere else for that matter—that does not use adhesives or sealants in some manner. The Handbook of Adhesion Technology is intended to be the definitive reference in the field of adhesion. Essential information is provided for all those concerned with the adhesion phenomenon. Adhesion is a phenomenon of interest in diverse scientific disciplines and of importance in a wide range of technologies. Therefore, this handbook includes the background science (physics, chemistry and materials science), engineering aspects of adhesion and industry specific applications. It is arranged in a user-friendly format with ten main sections: theory of adhesion, surface treatments, adhesive and sealant materials, testing of adhesive properties, joint design, durability, manufacture, quality control, applications and emerging areas. Each section contains about five chapters written by internationally renowned authors who are authorities in their fields. This book is intended to be a reference for people needing a quick, but authoritative, description of topics in the field of adhesion and the practical use of adhesives and sealants. Scientists and engineers of many different backgrounds who need to have an understanding of various aspects of adhesion technology will find it highly valuable. These will include those working in research or design, as well as others involved with marketing services. Graduate students in materials, processes and manufacturing will also want to consult it.

This open access book reviews the recent research achievements of the investigation of interfacial phenomena in polymer/polymer and polymer/metal joint interfaces with the state-of-the-art analytical techniques not previously used in the field of adhesion and bonding. Adhesion performance is determined not only by the two-dimensional interfaces but also by a three-dimensional (3D) region having different properties and structural characteristics that extends into the bulk materials. In this book, the authors also discuss in detail the bonding mechanism by characterizing such 3D regions called “interphase”. The book is of great interest to researchers and engineers devoted to adhesion science and technology. Videos via app: download the SN More Media app for free, scan an image or a link with play button, and access videos directly on your smartphone or tablet.