Advances In Fluid Solid Coupling Processes Between Fractures And Porous Rocks Experimental And Numerical Investigation

Hydraulic fracturing is the key measure for improving recovery of unconventional oil and gas reservoirs. Prediction of fracture morphology and productivity after fracturing is critical for fracturing design and optimization. The hydraulic fracturing process is to open porous rocks by artificially injecting highly compressed fluid, and the hydraulic fracture will be closed under the compaction of in-situ stress during the production process. In this regard, hydraulic fracturing and production processes are both fluid-solid coupling processes involving fractures and porous rocks. This Research Topic aims to gather the latest studies addressing how to improve the prediction accuracy of hydraulic fracturing morphology and post-fracturing productivity through experimental and numerical investigation. The experimental research shall underline hydraulic fracturing and fracture conductivity experiments and associated experimental methods, while the numerical research shall pay particular attention to discrete fracture network models, including the calculation efficiency and accuracy as well as the applicability.

Porous Rock Failure Mechanics: Hydraulic Fracturing, Drilling and Structural Engineering focuses on the fracture mechanics of porous rocks and modern simulation techniques for progressive quasi-static and dynamic fractures. The topics covered in this volume include a wide range of academic and industrial applications, including petroleum, mining, and civil engineering. Chapters focus on advanced topics in the field of rock’s fracture mechanics and address theoretical concepts, experimental characterization, numerical simulation techniques, and their applications as appropriate. Each chapter reflects the current state-of-the-art in terms of the modern use of fracture simulation in industrial and academic sectors. Some of the major contributions in this volume include, but are not limited to: anisotropic elasto-plastic deformation mechanisms in fluid saturated porous rocks, dynamics of fluids transport in fractured rocks and simulation techniques, fracture mechanics and simulation techniques in porous rocks, fluid-structure interaction in hydraulic driven fractures, advanced numerical techniques for simulation of progressive fracture, including multiscale modeling, and micromechanical approaches for porous rocks, and quasi-static versus dynamic fractures in porous rocks. This book will serve as an important resource for petroleum, geomechanics, drilling and structural engineers, R&D managers in industry and academia. Includes a strong editorial team and quality experts as chapter authors Presents topics identified for individual chapters are current, relevant, and interesting Focuses on advanced topics, such as fluid coupled fractures, rock’s continuum damage mechanics, and multiscale modeling Provides a ‘one-stop’ advanced-level reference for a graduate course focusing on rock’s mechanics

This Research Topic is Volume II of a series. The previous volume can be found here: Coal and Rock Dynamic Disasters: Advances of Physical and Numerical Simulation in Monitoring, Early Warning, and Prevention With the soaring growth of global population and socioeconomy, energy consumption and demand has been rapidly rising, and coal would still remain a fundamental energy source for a long time into the future. Seeking deep coal resources becomes an inevitable trend due to the depletion of shallow coal resources. Deep mining of coal resources promotes socioeconomic development, whereas bringing a variety of security challenges. In deep underground, there is a significant risk increase in coal and rock dynamic disasters (CRDDs), owing to the changes in physical and mechanical properties of coal and rock. In this regard, it is of great importance and necessity to prevent and control CRDDs effectively and efficiently.

This book presents the coupled Thermo-Hydro-Mechanical-Chemical (THMC) processes in fractured rocks at varying scales from single fractures to fracture networks. It also discussed the implication and potential application of the advanced understanding of coupled THMC processes in fractured rocks for geotechnical and geo-energy engineering.

The fluid flow in fracture porous media plays a significant role in the assessment of deep underground reservoirs, such as through CO2 sequestration, enhanced oil recovery, and geothermal energy development. Many methods have been employed—from laboratory experimentation to theoretical analysis and numerical simulations—and allowed for many useful conclusions. This Special Issue aims to report on the current advances related to this topic. This collection of 58 papers represents a wide variety of topics, including on granite permeability investigation, grouting, coal mining, roadway, and concrete, to name but a few. We sincerely hope that the papers published in this Special Issue will be an invaluable resource for our readers.

Despite of many years of studies, predicting fluid flow, heat, and chemical transport in fractured-porous media remains a challenge for scientists and engineers worldwide. This monograph is the third in a series on the dynamics of fluids and transport in fractured rock published by the American Geophysical Union (Geophysical Monograph Series, Vol. 162, 2005; and Geophysical Monograph, No. 122, 2000). This monograph is dedicated to the late Dr. Paul Witherspoon for his seminal influence on the development of ideas and methodologies and the birth of contemporary fractured rock hydrogeology, including such fundamental and applied problems as environmental remediation; exploitation of oil, gas, and geothermal resources; disposal of spent nuclear fuel; and geotechnical engineering. This monograph addresses fundamental and applied scientific questions and is intended to assist scientists and practitioners bridge gaps in the current scientific knowledge in the areas of theoretical fluids dynamics, field measurements, and experiments for different practical applications. Readers of this book will include researchers, engineers, and professionals within academia, Federal agencies, and industry, as well as graduate/undergraduate students involved in theoretical, experimental, and numerical modeling studies of fluid dynamics and reactive chemical transport in the unsaturated and saturated zones, including studies pertaining to petroleum and geothermal reservoirs, environmental management and remediation, mining, gas storage, and radioactive waste isolation in underground repositories. Volume highlights include discussions of the following: Fundamentals of using a complex systems approach to describe flow and transport in fractured-porous media. Methods of Field Measurements and Experiments Collective behavior and emergent properties of complex fractured rock systems Connection to the surrounding environment Multi-disciplinary research for different applications

Porosity plays a clearly important role in geology. It controls fluid storage in aquifers, oil and gas fields and geothermal systems, and the extent and connectivity of the pore structure control fluid flow and transport through geological formations, as well as the relationship between the properties of individual minerals and the bulk properties of the rock. In order to quantify the relationships between porosity, storage, transport and rock properties, however, the pore structure must be measured and quantitatively described.Porous Rock Fracture Mechanics focuses on the fracture mechanics of porous rocks and modern simulation techniques for progressive quasi-static and dynamic fractures. The topics covered in this volume include a wide range of academic and industrial applications, including petroleum, mining, and civil engineering. The goal of this book is to summarize, in a manner the reader can use for future experimental work, many of the techniques for analyzing the porosity of rocks or other porous materials. The mechanisms pertaining to percussion drilling and blasting are investigated, with specific reference to the application of fracture mechanics. In order to gain an improved understanding of the mechanisms controlling rock fragmentation, a multidisciplinary approach is followed which includes laboratory experiments conducted in plexiglass and rock, in-situ field experiments and analytical/numerical modeling techniques.This book discusses scattering methods for porosity analysis, petrophysical approaches, and image analysis approaches. Chapters focus on advanced topics in the field of rock's fracture mechanics and address theoretical concepts, experimental characterization, numerical simulation techniques, and their applications as appropriate. The increased attention paid to experimental rock fracture mechanics has led to major contributions to the solving of geophysical problems.This book serves as an important guiding tool for petroleum, geomechanics, drilling and structural engineers, Civil Engineers, Material Scientists, R&D managers in industry and academia as well as researchers in this field find this book beneficial.