Advances In Superconductivity V

This book covers all research fields in high Tc Superconductivity. Breakthrougs in the single crystal growth of a monolithic device leads to a new technology.

This volume contains the proceedings of the 2004 University of Miami Workshop on Unconventional Superconductivity. The workshop was the fourth in a series of successful meetings on High-T Superconductivity and C related topics, which took place at the James L. Knight Physics Building on the University of Miami campus in Coral Gables, Florida, in January 1991, 1995, 1999, and 2004. The workshop consisted of two consecutive events: 1. NATO Advanced Research Workshop (ARW) on New Challenges in Superconductivity: Experimental Advances and Emerging Theories, held on January 11-14, 2004; 2. Symposium on Emerging Mechanisms for High Temperature Superconductivity (SEMHTS), held on January 15-16, 2004. It is hard to write a balanced preface to a volume like this one, yet at least we try to offer the reader a taste of what was happening in this workshop. There were close to a hundred scientists from around the world, albeit fewer Russians than we had originally hoped for. Nevertheless, the workshop was very lively and we trust that this is demonstrated in this volume. The workshop included high-quality presentations on state of the art works, yet a key issue, discussed by many, was how homogeneous the cuprates are. STM data, as well as other reports, showed that the cuprate superconductors (SC’s) studied were inhomogeneous, especially in the underdoped regime; while experiments, like ARPES and magnetoresistance have established the existence of a Fermi Surface (FS), at least above some doping level, in the cuprates.

More than seven years have passed since the dramatic breakthrough in the critical temperature for superconductors. During this period, a host of new materials have been discovered, and efforts have been stepped up in a variety of domains including device and systems applications, commercialization, and basic research on the properties of superconductive materials. Recent progress in areas such as bulk single crystal production, long-scale wire and tape produc tion, flywheel and bearing applications, and electronic device applications for thin films indicate that science and technology have been working hand in hand in this field, as has been the case in the research and development of semi conductors. This interdisciplinary "resonance" will be certain to lead to further outstanding advances in the years to come. It goes without saying that worldwide information exchange is the key to accelerating progress in superconductivity science and technology. As in previous years, the ISS '93 served as a venue where visions of future develop ments were shared in addition to presentations and extensive discussions on the most up-to-date research results. I hope that the Proceedings contained in this volume will be consulted not only as a summary of the current "state of the art" in high-Tc superconductivity but also as a stimulating source of ideas regarding future applications of superconductivity research.

The 11th International Symposium on Superconductivity was held November 16-19, 1998, in Fukuoka, Japan. Convened annually since 1988, the symposium covers the whole field of superconductivity from fundamental physics and chemistry to new applications. At the 11th Symposium, there was increased interest reported in the development of trial devices using bismuth wires and yttrium-based bulk materials. Among the presentations were those that clearly defined the development targets for next-generation yttrium-based wires and bulk materials and single-flux quantum (SFQ) circuits. Other popular topics were high-temperature superconductivity applications such as SQUIDs, microwave filters, and cryocooler-cooled magnets. With more than 600 participants from 18 countries, the symposium provided an excellent forum for exchanges of the most recent information in the field of superconductivity.

Since the discovery of superconductivity with trans1tton temperatures above 77 K, concentrated research activities toward the exploration of practical applica tions of these materials have been carried out. Currently, a remarkable improve ment in superconducting properties has been achieved due to the fine optimization of fabrication processes, and this has attracted industrial interest for future applications. In the case of NdBa Cu 0 materials, a new pinning mecha 2 3 7 nism was found which enhances the critical current under applied magnetic fields. In single crystals of these materials, oxygen control results in an increase in the growth rate. The metalorganic chemical vapor deposition (MOCVD) film quality has been improved by using a new liquid raw material. Simultaneously, real demands from the viewpoint of the market start to be a motivation force, es pecially in electronics application where some products are already being sold. At the same time, interesting physical properlies have been obtained from a new superconducting single crystal which has a layered perovskite structure without copper. In addition, various precision measurement techniques have confirmed the d-wave mechanism and the existence of intrinsicJosephson junctions in single crystals. These new phenomena challenge the existing theoretical models but also open the way for new applications. These significant areas of progress in materials science have led high-Tc super conductivity research into the next phase of activity, while fundamental research continues to be very important. I sincerely hope that this volume will give further impetus to this development.

This volume contains the proceedings of the 2004 University of Miami Workshop on Unconventional Superconductivity. The workshop was the fourth in a series of successful meetings on High-T Superconductivity and C related topics, which took place at the James L. Knight Physics Building on the University of Miami campus in Coral Gables, Florida, in January 1991, 1995, 1999, and 2004. The workshop consisted of two consecutive events: 1. NATO Advanced Research Workshop (ARW) on New Challenges in Superconductivity: Experimental Advances and Emerging Theories, held on January 11-14, 2004; 2. Symposium on Emerging Mechanisms for High Temperature Superconductivity (SEMHTS), held on January 15-16, 2004. It is hard to write a balanced preface to a volume like this one, yet at least we try to offer the reader a taste of what was happening in this workshop. There were close to a hundred scientists from around the world, albeit fewer Russians than we had originally hoped for. Nevertheless, the workshop was very lively and we trust that this is demonstrated in this volume. The workshop included high-quality presentations on state of the art works, yet a key issue, discussed by many, was how homogeneous the cuprates are. STM data, as well as other reports, showed that the cuprate superconductors (SC’s) studied were inhomogeneous, especially in the underdoped regime; while experiments, like ARPES and magnetoresistance have established the existence of a Fermi Surface (FS), at least above some doping level, in the cuprates.

Five years have passed since the breakthrough in the critical temperature for superconductors. During this period, many superconducting materials have been discovered and developed, and our knowledge of the physical and other properties of oxide superconductors has deepened through extensive and intensive research. This knowledge has advanced superconductivity science and technology from the initial questioning stage to a more developed but still uncertain second stage where research activity in superconductivity now overlaps with fields of application. Generally speaking, science resonates with technology. Science not only complements but also competes with or stimulates technology. New scientific knowledge has triggered the second technological research stage. Much progress has been made in the development of practical devices, encouraging the application of superconductors in areas such as human levitation, a high speed levitated bearing, large current transforming leads, and high frequency devices. This technological progress has increased our understanding of the science involved, such as flux pinning and dynamics, and anomalous long-range superconducting interactions. At this important stage, international cooperation and collaborative projects can effectively sustain aggressive research and development in order to advance superconductivity to the next stages. The ISS Symposium is expected to serve as a venue for increasing our knowledge of superconductivity and for exchanging visions for future research and applications, through the presentation and discus of the latest research results. These proceedings also aim to summarize sion annual progress in high-Tc superconductivity in all fields.

Intense recent activity in the field of high-temperature superconductivity both in Japan and in the rest of the world was discussed at the First International Symposium on Superconductivity held in Nagoya in August 1988. Current research and development efforts by major Japanese companies in the field of high-temperature superconductivity are reported by leading company scientists, to give an overview of the high level of activity in the area. Progress in the development of new materials and recent theoretical work is reported both from Japanese and international researchers. Contributions are organized by topic, with such topics as crystal chemistry and electronic structure, processing and microstructure, tapes and thick films, wires and coils, and thin film processing and properties. Future applications of superconductivity including magnetic levitation vehicles, electronics based on Josephson junctions, power delivery, energy storage, ship propulsion and magnetic resonance imaging are particularly stressed.