Air And Water Purification And Pollution Control Equipment

This book has arisen directly from a course on Air and Water Pollution Control delivered by the first named author at the Technical University of Berlin. Extractions of this course have been presented in Brazil, Turkey and India. It was at the Indian Institute of Technology of Madras where the first named author got in contact with Professor Varma, who turned out to be a suggestive, cooperative coauthor. This book is addressed primarily to chemical, environmental and mechanical engineers, engaged in the design and operation of equipment for air pollution control. But it will certainly be helpful to chemists and physicists confronted with the solution of environmental problems. Furthermore it is intended as a text book for engineering courses on environmental protection. The goal of the book is the presentation of knowledge on design and operation of equipment applicable to the abatement of harmful emissions into air. The technology of air pollution control is of relatively young age, but it has already achieved a high degree of performance, due to the research and develop ment work invested in the last decades in this field.

Unique problem-and-solution approach for quickly mastering a broad range of calculations This book's problem-and-solution approach enables readers to quickly grasp the fundamentals of air pollution control equipment and essential applications. Moreover, the author sets forth solid principles for the design and selection of air pollution control equipment as well as for its efficient operation and maintenance. Readers gain a deep understanding of both the equipment itself and the many factors affecting performance. Following two introductory chapters, the book dedicates four chapters to examining control equipment for gaseous pollutants, including adsorption, absorption, and incineration equipment. The remaining six chapters deal with equipment for managing airborne particulate pollutants, including gravity settlers, cyclones, electrostatic precipitators, scrubbers, and baghouses. The appendix contains discussions of hybrid systems, the SI system (including conversion constants), and a cost-equipment model. Each chapter offers a short introduction to the control device discussed. Next, progressively more difficult problems with accompanying solutions enable readers to build their knowledge as they advance through the chapter. Problems reflect the most recent developments in pollution control and include a variety of performance equations and operation and maintenance calculations. Each problem includes a statement of the problem, the data used to solve the problem, and a detailed solution. Readers may further hone their skills by visiting the text's Web site for additional problems and solutions. This publication serves both as a textbook for engineering students and as areference for engineers and technicians who need to ensure that air pollution control equipment operates efficiently and enables their facility to meet all air pollution control standards and regulations.

This Revised Edition Of The Book On Environmental Pollution Control Engineering Features A Systematic And Thorough Treatment Of The Principles Of The Origin Of Air, Water And Land Pollutants, Their Effect On The Environment And The Methods Available To Control Them. The Demographic And Environmental Trends, Energy Consumption Patterns And Their Impact On The Environment Are Clearly Discussed. Application Of The Physical, And Chemical Engineering Concepts To The Design Of Pollution Control Equipment Is Emphasized. Due Importance Is Given To Modelling, Quality Monitoring And Control Of Specific Major Pollutants. A Separate Chapter On The Management Of Hazardous Wastes Is Added. Information Pertaining To Indian Conditions Is Given Wherever Possible To Help The Reader Gain An Insight Into India Sown Pollution Problems.This Book Is Mainly Intended As A Textbook For An Integrated One-Semester Course For Senior Level Undergraduate Or First Year Post-Graduate Engineering Students And Can Also Serve As A Reference Book To Practising Engineers And Decision Makers Concerned With Environmental Pollution Control.

This book is a good discussion of various air pollution control equipment. It covers a wide range of equipment and gives a good overview of the principles and applications. Very valuable is the practical experiences that are not commonly available in a typical textbook. The language is easy to understand, especially for those who do not have formal

The past thirty years have witnessed a growing worldwide desire that po- tive actions be taken to restore and protect the environment from the degr- ing effects of all forms of pollution—air, water, soil, and noise. Because pollution is a direct or indirect consequence of waste, the seemingly idealistic demand for “zero discharge” can be construed as an unrealistic demand for zero waste. However, as long as waste continues to exist, we can only attempt to abate the subsequent pollution by converting it to a less noxious form. Three major questions usually arise when a particular type of pollution has been id- tified: (1) How serious is the pollution? (2) Is the technology to abate it ava- able? and (3) Do the costs of abatement justify the degree of abatement achieved? This book is one of the volumes of the Handbook of Environmental Engineering series. The principal intention of this series is to help readers f- mulate answers to the last two questions above. The traditional approach of applying tried-and-true solutions to specific pollution problems has been a major contributing factor to the success of en- ronmental engineering, and has accounted in large measure for the establi- ment of a “methodology of pollution control. ” However, the realization of the ever-increasing complexity and interrelated nature of current environmental problems renders it imperative that intelligent planning of pollution abatement systems be undertaken.

USA. Handbook designed to help industry meet its environmental protection obligations in respect of pollution control of industrial waste disposal - covers research programmes for air pollution and water pollution control, equipment and costs examines control methods in the iron and steel industry, the metalworking industry, the pulp and pulp and paper industry, the chemical industry, the food industry, the textile industry, etc., and comments on relevant federal and state legislation. Diagrams, illustrations and statistical tables.