Circuit Analysis With Multisim

This book is concerned with circuit simulation using National Instruments Multisim. It focuses on the use and comprehension of the working techniques for electrical and electronic circuit simulation. The first chapters are devoted to basic circuit analysis. It starts by describing in detail how to perform a DC analysis using only resistors and independent and controlled sources. Then, it introduces capacitors and inductors to make a transient analysis. In the case of transient analysis, it is possible to have an initial condition either in the capacitor voltage or in the inductor current, or both. Fourier analysis is discussed in the context of transient analysis. Next, we make a treatment of AC analysis to simulate the frequency response of a circuit. Then, we introduce diodes, transistors, and circuits composed by them and perform DC, transient, and AC analyses. The book ends with simulation of digital circuits. A practical approach is followed through the chapters, using step-by-step examples to introduce new Multisim circuit elements, tools, analyses, and virtual instruments for measurement. The examples are clearly commented and illustrated. The different tools available on Multisim are used when appropriate so readers learn which analyses are available to them. This is part of the learning outcomes that should result after each set of end-of-chapter exercises is worked out. Table of Contents: Introduction to Circuit Simulation / Resistive Circuits / Time Domain Analysis -- Transient Analysis / Frequency Domain Analysis -- AC Analysis / Semiconductor Devices / Digital Circuits

This book is concerned with circuit simulation using National Instruments Multisim. It focuses on the use and comprehension of the working techniques for electrical and electronic circuit simulation. The first chapters are devoted to basic circuit analysis. It starts by describing in detail how to perform a DC analysis using only resistors and independent and controlled sources. Then, it introduces capacitors and inductors to make a transient analysis. In the case of transient analysis, it is possible to have an initial condition either in the capacitor voltage or in the inductor current, or both. Fourier analysis is discussed in the context of transient analysis. Next, we make a treatment of AC analysis to simulate the frequency response of a circuit. Then, we introduce diodes, transistors, and circuits composed by them and perform DC, transient, and AC analyses. The book ends with simulation of digital circuits. A practical approach is followed through the chapters, using step-by-step examples to introduce new Multisim circuit elements, tools, analyses, and virtual instruments for measurement. The examples are clearly commented and illustrated. The different tools available on Multisim are used when appropriate so readers learn which analyses are available to them. This is part of the learning outcomes that should result after each set of end-of-chapter exercises is worked out. Table of Contents: Introduction to Circuit Simulation / Resistive Circuits / Time Domain Analysis -- Transient Analysis / Frequency Domain Analysis -- AC Analysis / Semiconductor Devices / Digital Circuits

Consisting of multiple experiments covering multiple subjects regarding alternating current circuits, this book aims to spread knowledge and spark discussion with its readers. The book will cover each experiment theoretically, understand its background and verify statements made using NI Multisim 14.1. The book is filled with easy to understand circuit diagrams built in iCircuit for better understanding of the topics at hand. There are two chapters covering six experiments, three each, these include: - Experiment 1, Transient Analysis of RC Circuit - Experiment 2, Transient Analysis of RL Circuit - Experiment 3, Transient Analysis of RLC Circuit - Experiment 4, Superposition Theory - Experiment 5, Resonance - Experiment 6, Two Port Networks This book will be helpful for future electrical and electronic engineering students and hobbyists looking to better integrate their knowledge of electrical theory with modern simulation software that pushes for further possibilities.

Multisim is now the de facto standard for circuit simulation. It is a SPICE-based circuit simulator which combines analog, discrete-time, and mixed-mode circuits. In addition, it is the only simulator which incorporates microcontroller simulation in the same environment. It also includes a tool for printed circuit board design. Advanced Circuit Simulation Using Multisim Workbench is a companion book to Circuit Analysis Using Multisim, published by Morgan & Claypool in 2011. This new book covers advanced analyses and the creation of models and subcircuits. It also includes coverage of transmission lines, the special elements which are used to connect components in PCBs and integrated circuits. Finally, it includes a description of Ultiboard, the tool for PCB creation from a circuit description in Multisim. Both books completely cover most of the important features available for a successful circuit simulation with Multisim. Table of Contents: Models and Subcircuits / Transmission Lines / Other Types of Analyses / Simulating Microcontrollers / PCB Design With Ultiboard

Covers advanced analyses and the creation of models and subcircuits. This book also includes coverage of transmission lines, the special elements which are used to connect components in PCBs and integrated circuits. Finally, it includes a description of Ultiboard, the tool for PCB creation from a circuit description in Multisim.

This textbook provides a compact but comprehensive treatment that guides students through the analysis of circuits, using NI MultisimTM and MATLAB®. Ideal as a hands-on source for courses in Circuits, Electronics, Digital Logic and Power Electronics this text focuses on solving problems using market-standard software, corresponding to all key concepts covered in the classroom. The author uses his extensive classroom experience to guide students toward deeper understanding of key concepts, while they gain facility with software they will need to master for later studies and practical use in their engineering careers.

This book provides a comprehensive treatment of the popular circuit analysis program Multisim, along with a sufficient amount of underlying theory to constitute a complete study of a relevant modern approach to circuit analysis. The book begins with the process required for obtaining parts and constructing a circuit model. Two chapters are then devoted to DC Circuit Analysis including analysis at a fixed operating point followed by the process of sweeping a DC variable. Several chapters are then devoted to Transient Analysis ranging from the simplest single-element forms to more complex transient situations. The treatment then moves to Frequency Response Analysis and Steady-State AC Analysis at a single frequency. Fourier Analysis is covered followed by Pole-Zero Analysis. Finally, Sensitivity Analysis, Worst-Case analysis, Monte Carlo Analysis, and Temperature Sweep Analysis are covered. The underlying theory is covered as a supplement to each of the preceding topics. Numerous examples are provided. Circuit diagrams and Multisim generated curves each occupy a full page providing a convenient way to display the results in a presentation form.

Designed for use in a one or two-semester Introductory Circuit Analysis or Circuit Theory Course taught in Electrical or Computer Engineering Departments.