Circular Column Design Charts To Eurocode 2

This book provides design chart for circular columns with common size from 300mm to 2400mm diameter. These data serve as quick reference for structural engineer to determine the size of columns, effectively aid in preliminary design and construction cost estimation.

Applies to the design of building and civil engineering structures in plain, reinforced and pre-stressed concrete. The code (for convenience referred to as EC2) is written in several parts: EN 1992 - 1 - 1; EN 1992 - 1 - 2; EN 1992 - 2; and EN 1992 - 3.

This book provides the design charts that had been included in CP 110 Part 3 but were omitted from BS 8110 when it was published in 1985. The charts cover the use of those grades of concrete and steel recommended in the standard. It also includes four additional charts which can be used for any grade of concrete or steel, a particularly useful reference when checking existing structures and when designing for overseas work.

This handbook aims to assist designers to apply Eurocode 2 by explaining the background to, and the intention of, the provisions indicating the most convenient design approaches, comparing the provisions with those in BS 8110 presenting design aids, charts and examples.

A concise and practical introduction to the new European Code of Practice for Design of Concrete Structures, EC2. This book guides the reader through the background to the Eurocodes and explains the main differences between them and the equivalent Standard Codes of Practice. An Introduction to Eurocode 2 will be invaluable for engineers who need to learn about the new code and how it can be used effectively in design.

This book contains auxiliary calculation tools to facilitate the safety assessment of reinforced concrete sections. Essential parameters in the design to the ultimate limit state of resistance such as the percentage of reinforcement and the position of the neutral axis in concrete cross-sections, as well as the control of the maximum stresses in service limit states are provided by these tools. A set of tables, charts and diagrams used to design cross-sections of reinforced and prestressed concrete structures are supplied. The most current beams and columns cross-sections namely, rectangular, circular and T-sections are considered. These tools have been prepared in line with the provisions of the new European regulations, with particular reference to Eurocode 2 – Design of Concrete Structures. The book stands as an ideal learning resource for students of structural design and analysis courses in civil engineering, building construction and architecture, as well as a valuable reference for concrete structural design professionals in practice.

This practical design guide illustrates through worked examples how Eurocode 2 may be used in practice. Complete and detailed designs of six archetypal building and public utility structures are provided. The book caters to students and engineers with little or no practical experience of design, as well as to more experienced engineers who may be u