Concrete Structures Deteriorated By Delayed Ettringite Formation And Alkali Silica Reactions

This book discusses the behaviour of isolated concrete bottle-shaped struts affected by internal expansion reactions (ISR). For that purpose, the numerical modelling of damaged concrete was performed using the Concrete Damaged Plasticity Model (CDPM) implemented in ABAQUS and validated the model through Sankovich's tests. A procedure to automatically obtain the concrete plasticity and damage parameters, essential for CDPM, was developed in Matlab. The inputs were the characteristic compressive strength of the concrete, the equivalent length of the finite element mesh and the ratio between the plastic and inelastic compressive strains. The results showed that the CDPM could represent the load-bearing mechanisms of isolated concrete bottle-shaped struts for a range of several stress levels to which these elements may be subjected in the panels investigated. The numerical simulations for different expansion levels consistently captured the expected damage profile of the panels and the load corresponding to the formation of the first crack, the estimated crack opening, and the ultimate load. For the panels investigated, the reduction observed in the failure load reached values close to 70%, the increase of the tensile plastic deformation was more than 60%, and the maximum crack opening can reach an increase of 113% when compared with those observed experimentally in panels without internal swelling reactions The book also offers a systematic review of the current state of knowledge and it is a valuable resource for scientists, students, practitioners, and lecturers in various scientific and engineering disciplines, namely, civil and materials engineering, as well as and other interested parties.

The report comprises a review and analysis of the available literature pertaining to the causes, effects and prevention of secondary (delayed) ettringite in concrete . Over 300 publications have been examined . Case studies of damage in concrete possibly caused by secondary ettringite formation are examined first. Fundamental research on secondary ettringite formation, its chemistry, and deposition mechanisms is then reviewed. Key investigations on the topic are analyzed in detail. Next, the potential importance of (a) method of heat-curing and (b) the chemistry of cement is outlined. In the final chapter, a rapid test for evaluation of potential secondary ettringite susceptibility (the "Duggan" test) is evaluated. The analysis indicates that there appears to be a potential for a secondary ettringite formation problem in North America; it is highly probable that secondary ettringite formation can lead to significant deterioration of heat-treated concrete. However, it is unlikely that secondary ettringite formation is, or will be, the sole mechanism responsible for premature deterioration. The critical factors that determine extent of damage due to secondary ettringite formation are (a) duration of delay period before heating the concrete; (b) severity of the heating and/or cooling regime ; and (c) the SO3/A1203 ratio of the cement. There is no evidence that nonheat-treated concrete is susceptible to this phenomenon. Further research and improvements to the Duggan test may result in the development of a useful standard test method to assess the long-term dimensional stability and durability of concrete.

This book offers a complete diagnosis of concrete samples collected from a pile cap block of residential buildings affected by internal swelling reactions. Covering an extensive laboratory campaign to evaluate the transport properties of concrete samples, as well as their physical and chemical composition using advanced techniques to analyse cores extracted from real buildings that have concrete elements affected by internal swelling reactions (ISR). It features several rehabilitation procedures, pile caps repair and rehabilitation design, executed using strengthening procedures to provide the complete restoration of the structural integrity of the element deteriorated. These rehabilitation procedures proved to be a good solution to retrofit pile cap deteriorated by expansions due to internal swelling reactions of concrete. The book also offers a systematic review of the current state of knowledge and it is a valuable resource for scientists, students, and practitioners in various scientific and engineering disciplines, namely, civil and materials engineering, as well as and other interested parties.

Poor durability of concrete is a continuing concern to owners of structures and their professional advisors. Advances in methods of assessing and predicting durability are being made in many areas, and this book provides a state of art review of the current situation. Contributions from leading researchers and consultants make it a valuable guide for all those responsible for concrete buildings and structures.

Alkali-Aggregate Reaction in Concrete: A World Review is unique in providing authoritative and up to date expert information on the causes and effects of Alkali-Aggregate Reaction (AAR) in concrete structures worldwide. In 1992 a first edition entitled The Alkali-Silica Reaction in Concrete, edited by Professor Narayan Swamy, was published in a first attempt to cover this concrete problem from a global perspective, but the coverage was incomplete. This completely new edition offers a fully updated and more universal coverage of the world situation concerning AAR and includes a wealth of new evidence and research information that has accumulated in the intervening years. Although there are various textbooks offering readers sections that deal with AAR deterioration and damage to concrete, no other single book brings together the views of recognised international experts in the field, and the wealth of scattered research information that is available. It provides a ‘state of the art’ review and deals authoritatively with the mechanisms of AAR, its diagnosis and how to treat concrete affected by AAR. It is illustrated by numerous actual examples from around the world, and comprises specialist contributions provided by senior engineers and scientists from many parts of the world. The book is divided into two distinct but complementary parts. The first five chapters deal with the most recent findings concerning the mechanisms involved in the reaction, methods concerning its diagnosis, testing and evaluation, together with an appraisal of current methods used in its avoidance and in the remediation of affected concrete structures. The second part is divided into eleven chapters covering each region of the world in turn. These chapters have been written by experts with specialist knowledge of AAR in the countries involved and include an authoritative appraisal of the problem and its solution as it affects concrete structures in the region. Such an authoritative compilation of information on AAR has not been attempted previously on this scale and this work is therefore an essential source for practising and research civil engineers, consultant engineers and materials scientists, as well as aggregate and cement producers, designers and concrete suppliers, especially regarding projects outside their own region.

The Concrete Solutions series of International Conferences on Concrete Repair began in 2003 with a conference held in St. Malo, France in association with INSA Rennes. Subsequent conferences have seen us partnering with the University of Padua in 2009 and with TU Dresden in 2011. This conference is being held for the first time in the UK, in associ