Cryogenic Crushing Of Materials

"Written by engineers for engineers (with over 150 International Editorial Advisory Board members),this highly lauded resource provides up-to-the-minute information on the chemical processes, methods, practices, products, and standards in the chemical, and related, industries. "

In recent years, the technology of cryogenic comminution has been widely applied in the field of chemical engineering, food making, medicine production, and particularly in recycling of waste materials. Because of the increasing pollution of waste tires and the shortage of raw rubber resource, the recycling process for waste rubber products has become important and commercially viable. This technology has shown a great number of advantages such as causing no environmental pollution, requiring low energy consumption and producing high quality products. Hence, the normal crusher which was used to reclaim materials, such as waste tires, nylon, plastic and many polymer materials at atmospheric 12 temperature is being replaced by a cryogenic crusher. • In the cryogenic crusher, the property of the milled material is usually very sensitive to temperature change. When a crusher is in operation, it will generate a great deal of heat that causes the material temperature increased. Once the temperature increases over the vitrification temperature, the material property will change and lose the brittle behavior causing the energy consumption to rise sharply. Consequently, the comminution process cannot be continued. Therefore, it is believed that the cryogenic crusher is the most critical component in the cryogenic comminution system. The research on the temperature increase and energy consumption in the cryogenic crusher is not only to reduce the energy consumption of the crasher, but also to reduce the energy consumption of the cryogenic system.

There are many academic references describing how RMs are made, but few that explain why they are used, how they should be used and what happens when they are not properly used. In order to fill this gap, the editors have taken the contributions of more than thirty RM practitioners to produce a highly readable text organized in nine chapters. Starting with an introduction to historical, theoretical and technical requirements, the book goes on to examine all aspects of RM production from planning, preparation through analysis to certification, reviews recent development areas, RMs for life analysis and some important general application fields, considers the proper usage of RMs, gives advice on availability and sources of information and lastly looks at future trends and needs for RMs. This book is intended to be a single point of information that both guides the reader through the use of RMs and serves as a primary reference source. It should be on the reading list of anyone working in an analytical laboratory and be found on the library shelf of all analytical chemical laboratories.

The work contains the results of the Sixth International Conference on Advanced Manufacturing Systems and Technology – AMST’02, which was held in Udine in June 2002. It presents up-to-date information on the latest developments – research results and experience – in the field of machining of conventional and advanced materials, machine tools and flexible manufacturing systems, forming, nonconventional processes, robotics, measurement and control, quality, design and ecodesign, rapid prototyping, rapid tooling and manufacturing, materials and mechanics.

Resource recovery and recycling from millions of tons of wastes produced from industrial activities is a continuing challenge for environmental engineers and researchers. Demand for conservation of resources, reduction in the quantity of waste and sustainable development with environmental control has been growing in every part of the world. Resource Recovery and Recycling from Metallurgical Wastes brings together the currently used techniques of waste processing and recycling, their applications with practical examples and economic potentials of the processes. Emphasis is on resource recovery by appropriate treatment and techniques. Material on the subject is scatterend in waste management and environmental related journals, conference volumes and government departmental technical reports. This work serves as a source book of information and as an educational technical reference for practicing scientists and engineers, as well as for students. Describes the currently used and potential techniques for the recovery of valuable resources from mineral and metallurgical wastes Discusses the applications to specific kinds of wastes with examples from current practices, as well as eht economics of the processes Presents recent and emerging technologies of potentials in metal recycling and by-product utilization