Dams And Earthquakes

Dams and Earthquakes deals with the association of earthquakes and large artificial lakes, particularly on the part that pore pressure plays in inducing earthquakes. The book also contains methods for recording seismic activity, before, during, and after the filling of reservoir dams through the installation of a network of portable seismographs. The text assesses the parameters and macroseismic effects of the Koyna earthquake in India in December 1967, as well as the instrumental and macroseismic data showing that the Koyna earthquake is a multiple seismic event. The book investigates the geology, hydrology, and seismicity of seismic reservoir sites, including three cases of induced seismicity after fluid injections in deep wells. A possible correlation between the reservoir level or volume of the injected fluid and the tremor frequency exists. The characteristic seismic features of reservoir associated earthquakes can reflect changes in the mechanical properties of rock masses near the reservoirs. The book also investigates the part played by increased pore-fluid pressures in triggering the earthquakes at Denver, Rangely, Kariba, Kremasta and Koyna. The UNESCO Working Group on "Seismic Phenomena Associated with Large Reservoirs" recommends the adoption of a two-phase planning in instrumental studies and surveys at sites to be used for large reservoirs. The book can be beneficial for meteorologists, environmentalists, geologists, civil engineers, structural engineers, or for officers of river and lake authorities.

A comprehensive guide to modern-day methods for earthquake engineering of concrete dams Earthquake analysis and design of concrete dams has progressed from static force methods based on seismic coefficients to modern procedures that are based on the dynamics of dam–water–foundation systems. Earthquake Engineering for Concrete Dams offers a comprehensive, integrated view of this progress over the last fifty years. The book offers an understanding of the limitations of the various methods of dynamic analysis used in practice and develops modern methods that overcome these limitations. This important book: Develops procedures for dynamic analysis of two-dimensional and three-dimensional models of concrete dams Identifies system parameters that influence their response Demonstrates the effects of dam–water–foundation interaction on earthquake response Identifies factors that must be included in earthquake analysis of concrete dams Examines design earthquakes as defined by various regulatory bodies and organizations Presents modern methods for establishing design spectra and selecting ground motions Illustrates application of dynamic analysis procedures to the design of new dams and safety evaluation of existing dams. Written for graduate students, researchers, and professional engineers, Earthquake Engineering for Concrete Dams offers a comprehensive view of the current procedures and methods for seismic analysis, design, and safety evaluation of concrete dams.

From earth tectonics and meteorology to risk, responsibility, and the role of government, this comprehensive and detailed book reviews current practices in designing dams to withstand extreme hydrologic and seismic events. Recommendations for action and for further research to improve dam safety evaluations are presented.

Earthquakes have always been a significant aspect of the design and safety of dams. This position paper deals with the seismic safety of large dams, based on experiences with large earthquakes in Japan (Tohoku earthquake, 2011, Richter magnitude 9.0), in China (Wenchuan earthquake, 2008, Richter magnitude 8.0) and in Chile (Maule earthquake, 2010, Richter magnitude 8.8). It presents ways to prevent key aspects of large dam failure under severe seismic conditions with a focus on design instead of on earthquake prediction. This is done by considering the prevention of uncontrolled rapid release of water of a storage dam under full reservoir conditions in relation to expected seismic conditions. This position paper is composed by the Committee on Seismic Aspects of Dam Design of The International Committee of Large Dams. Les tremblements de terre ont toujours été un aspect important de la conception et de la sécurité des barrages. Ce document de synthèse traite de la sécurité sismique des grands barrages, en se fondant sur l’expérience acquise lors de grands séismes au Japon (séisme de Tohoku, 2011, magnitude 9,0 sur l’échelle de Richter), en Chine (séisme de Wenchuan, 2008, magnitude 8,0 sur l’échelle de Richter) et au Chili (séisme de Maule, 2010, magnitude 8,8 sur l’échelle de Richter). Il présente des moyens de prévenir les aspects clés de la défaillance des grands barrages dans des conditions sismiques sévères en mettant l’accent sur la conception plutôt que sur la prévision des séismes. Pour ce faire, on examine la prévention d’une libération rapide et incontrôlée de l’eau d’un barrage de stockage dans des conditions de réservoir plein par rapport aux conditions sismiques prévues. Cet argumentaire est composé par le Comité sur les Aspects Sismiques des Projets de Barrages de la Commission Internationale des Grands Barrages.

Earthquake Engineering for Dams and Reservoirs is an invaluable source for any engineer, or designer, tasked with building, retrofitting or maintaining dams in all seismically active regions to make decisions on the type of dam structure required for new projects and understand the issues that face existing dams and how to mitigate them.

Since the publication of the first Dams and Earthquakes in 1976, the phenomenon of reservoir induced seismicity (RIS) is more widely understood. There are now over 70 known cases of reservoir-induced earthquakes. These damaging earthquakes have occurred in China, Kariba, Zambia, Greece, Kremasta, Koyna, India, California and elsewhere. The December 10, 1967 Koyna earthquake, with a magnitude of 6.3 claimed over 200 lives, injured 1500 and rendered thousands homeless. Because of the ever increasing demand for dam construction, for power generation, irrigation, and flood control, it is necessary to understand how, where and why induced earthquakes occur. Recent research has demonstrated that when suitable physical measurements of rock properties are made, a fairly accurate model of induced seismicity can be obtained. It appears possible to mitigate the hazard of RIS through manipulation of reservoir levels. The present volume is an updated and revised follow-up to the 1976 book. It presents an overview of the world-wide distribution of RIS, the salient aspects of RIS at specific reservior sites where earthquakes of M〉5 have occurred and where new results on RIS are reported, and how they differ from the normal earthquake sequences. An examination of the non-occurrence of induced earthquakes in the vicinity of the Himalyan reservoirs and other related topics such as: the size of the largest induced earthquake that could occur at a given reservoir site; prediction of induced earthquakes; and dam site investigations which should be completed during the planning and operation of the reservoirs are also included.