Dc Microgrids

Urban DC Microgrid: Intelligent Control and Power Flow Optimization focuses on microgrids for urban areas, particularly associated with building-integrated photovoltaic and renewable sources. This book describes the most important problems of DC microgrid application, with grid-connected and off-grid operating modes, aiming to supply DC building distribution networks. The book considers direct current (DC) microgrid to supply DC building distribution networks for positive energy buildings; dynamic interactions with the utility grid based on communication with the smart grid; supervisory control systems; and energy management. The global power system is exposed and the DC microgrid system is presented and analyzed with results and discussion, highlighting both the advantages and limitations of the concept. Coverage at the system level of microgrid control as well as the various technical aspects of the power system components make this a book interesting to academic researchers, industrial energy researchers, electrical power and power system professionals. Provides a strong overview of microgrid modelling Describes the most important problems of DC microgrid application, with grid-connected and off-grid operating modes, aiming to supply DC building distribution networks Offers experimental problem examples and results Includes supervisory control and energy management

DC MICROGRIDS Written and edited by a team of well-known and respected experts in the field, this new volume on DC microgrids presents the state-of-the-art developments and challenges in the field of microgrids for sustainability and scalability for engineers, researchers, academicians, industry professionals, consultants, and designers. The electric grid is on the threshold of a paradigm shift. In the past few years, the picture of the grid has changed dramatically due to the introduction of renewable energy sources, advancements in power electronics, digitalization, and other factors. All these megatrends are pointing toward a new electrical system based on Direct Current (DC). DC power systems have inherent advantages of no harmonics, no reactive power, high efficiency, over the conventional AC power systems. Hence, DC power systems have become an emerging and promising alternative in various emerging applications, which include distributed energy sources like wind, solar and Energy Storage System (ESS), distribution networks, smart buildings, remote telecom systems, and transport electrification like electric vehicles (EVs). All these applications are designed at different voltages to meet their specific requirements individually because of the lack of standardization. Thus, the factors influencing the DC voltages and system operation needed to be surveyed and analyzed, which include voltage standards, architecture for existing and emerging applications, topologies and control strategies of power electronic interfaces, fault diagnosis and design of the protection system, optimal economical operation, and system reliability.

SMART HYBRID AC/DC MICROGRIDS Addresses the technical aspects and implementation challenges of smart hybrid AC/DC microgrids Hybrid AC/DC Microgrids: Power Management, Energy Management, and Power Quality Control provides comprehensive coverage of interconnected smart hybrid microgrids, their different structures, and the technical issues associated with their control and implementation in the next generation of smart grids. This authoritative single-volume resource addresses smart hybrid microgrids power management, energy management, communications, power converter control, power quality, renewable generation integration, energy storage, and more. The book contains both basic and advanced technical information about smart hybrid AC/DC microgrids, featuring a detailed discussion of microgrid structures, communication technologies, and various configurations of interfacing power converters and control strategies. Numerous case studies highlight effective solutions for critical issues in hybrid microgrid operation, control and power quality compensation throughout the text. Topics include control strategies of renewable energy and energy storage interfacing converters in hybrid microgrids, supervisory control strategies of interfacing power converters for microgrid power management and energy microgrid, and smart interfacing power converters for power quality control. This volume: Includes a thorough overview of hybrid AC/DC microgrid concepts, structures, and applications Discusses communication and security enhancement techniques for guarding against cyberattacks Provides detailed controls of smart interfacing power electronics converters from distributed generations and energy storage systems in hybrid AC/DC microgrids Provides details on transient and steady-state power management systems in microgrids Discusses energy management systems, hierarchical control, multi-agent control, and advanced distribution management control of smart microgrids Identifies opportunities to control power quality with smart interfacing power electronic converters Addresses power quality issues in the context of real-world applications in data centers, electric railway systems, and electric vehicle charging stations Smart Hybrid AC/DC Microgrids: Power Management, Energy Management, and Power Quality Control is a valuable source of up-to-date information for senior undergraduate and graduate students as well as academic researchers and industry engineers in the areas of renewable energy, smart grids, microgrids, and power electronics.

AC/DC Microgrids are a small part of low voltage distribution networks that are located far from power substations, and are interconnected through the point of common coupling to power grids. These systems are important keys for the flexible, techno-economic, and environmental-friendly generation of units for the reliable operation and cost-effective planning of smart electricity grids. Although AC/DC microgrids, with the integration of renewable energy resources and other energy systems, such as power-to-gas, combined heat and power, combined cooling heat and power, power-to-heat, power-to-vehicle, pump and compressed air storage, have several advantages, there are some technical aspects that must be addressed. This Special Issue aims to study the configuration, impacts, and prospects of AC/DC microgrids that enable enhanced solutions for intelligent and optimized electricity systems, energy storage systems, and demand-side management in power grids with an increasing share of distributed energy resources. It includes AC/DC microgrid modeling, simulation, control, operation, protection, dynamics, planning, reliability and security, as well as considering power quality improvement, load forecasting, market operations, energy conversion, cyber/physical security, supervisory and monitoring, diagnostics and prognostics systems.

This book introduces several novel contributions into the current literature. Firstly, given that microgrid topologies are paramount in theoretical analysis, the author has proposed a rigorous method of computing the network’s admittance matrix and developed to facilitate the stability analysis of DC microgrids supplying nonlinear loads. This unique approach enabled the factorisation of the admittance matrix in a particular way that facilitates a rigorous theoretical analysis for deriving the stability conditions. Secondly, author has proposed a unified control structure at the primary control layer that maintains the widely accepted droop-based approaches and additionally ensures crucial current- and voltage-limiting properties, thus offering an inherent protection to distributed energy resources. He has formalised the control design proofs using Lyapunov methods and nonlinear ultimate boundedness theory, for both parallel and meshed microgrid configurations. Moreover, he has developed a distributed secondary controller using a diffusive coupling communication network, on top of the primary control, to achieve voltage restoration and improve the power sharing. In this way, the author has formulated the complete hierarchical control scheme. In this high-order nonlinear setting, he has analytically proven closed-loop system stability of the overall system, for the first time, using two-time scale approaches and singular perturbation theory, by formulating rigorous theorems that introduce straightforward conditions that guide the system and control design and demonstrate system stability at the desired equilibrium point. In addition, the author has provided a straightforward algorithm for simple testing of system stability and explored from a graphical perspective by giving an interpretation to the effect of the nonlinear load onto the system performance and stability.

The DC/AC microgrid system is a crucial empowering technology for the integration of various types of renewable energy sources (RES) accompanied by a smart control approach to enhance the system reliability and efficiency. This book presents cutting-edge technology developments and recent investigations performed with the help of power electronics. Large-scale renewable energy integration presents challenges and issues for power grids. In particular, these issues include microgrid adaption to RES, AC machines, the new configuration of AC/DC converters, and electrification of domestic needs with optimal cost expenses from domestic standalone microgrids. Furthermore, this book elaborates cutting-edge developments in electric vehicle fast charging configuration, battery management, and control schemes with renewable energies through hardware-in-loop testing and validation for performance durability in real-time application. Overall, the book covers the diverse field of microgrids, allowing readers to adopt new technologies and prepare for future power demands with sustainable green engineering.

This book provides an overview of recent research activities in the control, protection and architectural design of a number of different types of DC distribution systems and microgrids. Practical requirements and implementation details of several types of DC distribution systems used in real world industrial applications are also given.

Discover the art and science of designing, building, and installing DC microgrid systems with this authoritative resource Introduction to DC Microgrids delivers a comprehensive and concise introduction to the fundamentals of DC microgrid technology. Beginning with the basic concepts of DC systems and their various constituents, the book moves on to a variety of DC architectures and voltage levels of DC microgrid systems. Typical examples, use cases, and applications round out the material to form a practical and accessible resource ideal for students, professionals, and enthusiasts. Accomplished engineers and authors, Vivek Agarwal and Prajof Prabhakaran, offer readers solved numerical examples in every chapter to shore up the theoretical concepts presented. They also discuss different types of power converters used in several roles in DC microgrid systems and common issues faced by those who install and use them. Introduction to DC Microgrids makes a compelling case for the merits of using DC microgrids over AC solutions and includes usable techniques to determine optimal placement of loads and sources. You’ll also learn from: A complete introduction to DC microgrid systems with discussions of a variety of reported architectures and voltage levels A fulsome description of power electronic converters in DC microgrid systems with simulation and experimental results of several different converters An explanation of DC microgrid control methods, including novel control techniques to minimize voltage regulation and improve load sharing accuracy A treatment of power quality and protection of DC microgrids, including a discussion of how to mitigate voltage fluctuation and harmonic issues Perfect for doctoral, graduate, and senior undergraduate students in electrical engineering and related programs, Introduction to DC Microgrids also has a place on the bookshelves of diploma students, technicians who install and implement microgrid systems in the field, and industrial professionals interested in electrical sustainability projects.