Delamination In Wood Wood Products And Wood Based Composites

In the last quarter century, delamination has come to mean more than just a failure in adhesion between layers of bonded composite plies that might affect their load-bearing capacity. Ever-increasing computer power has meant that we can now detect and analyze delamination between, for example, cell walls in solid wood. This fast-moving and critically important field of study is covered in a book that provides everyone from manufacturers to research scientists the state of the art in wood delamination studies. Divided into three sections, the book first details the general aspects of the subject, from basic information including terminology, to the theoretical basis for the evaluation of delamination. A settled terminology in this subject area is a first key goal of the book, as the terms which describe delamination in wood and wood-based composites are numerous and often confusing. The second section examines different and highly specialized methods for delamination detection such as confocal laser scanning microscopy, light microscopy, scanning electron microscopy and ultrasonics. Ways in which NDE (non-destructive evaluation) can be employed to detect and locate defects are also covered. The book’s final section focuses on the practical aspects of this defect in a wide range of wood products covering the spectrum from trees, logs, laminated panels and glued laminated timbers to parquet floors. Intended as a primary reference, this book covers everything from the microscopic, anatomical level of delamination within solid wood sections to an examination of the interface of wood and its surface coatings. It provides readers with the perspective of industry as well as laboratory and is thus a highly practical sourcebook for wood engineers working in manufacturing as well as a comprehensively referenced text for materials scientists wrestling with the theory underlying the subject.

Nature's engineering of wood through genetics, wind, and weather creates a wide variability in wood as a material. Consequently, manufacture and users of wood products are frequently frustrated in dealing with the forest resource. Manufacturers sometimes argue that wood is difficult to consistently process into quality products because of the wide range of properties that exist in this raw material. Users of wood products can be equally frustrated with the performance variability found in finished products. Nondestructive evaluation (NDE) technologies have contributed significantly toward eliminating the cause of these frustrations. NDE technologies have been developed and are currently used in lumber and veneer grading programs that result in engineered materials that have consistent well-defined performance characteristics. This brief volume explores some of the processes that are used to manufacture wood, including green wood technology and provides a bit of history to wood production and its uses too. Other products that may interest you from the US Forest Service can be found at this link: https://bookstore.gpo.gov/agency/819

This handbook provides an overview on wood science and technology of unparalleled comprehensiveness and international validity. It describes the fundamental wood biology, chemistry and physics, as well as structure-property relations of wood and wood-based materials. The different aspects and steps of wood processing are presented in detail from both a fundamental technological perspective and their realisation in industrial contexts. The discussed industrial processes extend beyond sawmilling and the manufacturing of adhesively bonded wood products to the processing of the various wood-based materials, including pulp and paper, natural fibre materials and aspects of bio-refinery. Core concepts of wood applications, quality and life cycle assessment of this important natural resource are presented. The book concludes with a useful compilation of fundamental material parameters and data as well as a glossary of terms in accordance with the most important industry standards. Written and edited by a truly international team of experts from academia, research institutes and industry, thoroughly reviewed by external colleagues, this handbook is well-attuned to educational demands, as well as providing a summary of state-of-the-art research trends and industrial requirements. It is an invaluable resource for all professionals in research and development, and engineers in practise in the field of wood science and technology.

"This book examines the latest research advances and technological developments for wood material as an engineering product and the innovation it provides for environmental friendly materials"--Provided by publisher.

Global awareness of environmental issues has resulted in the emergence of economically and environmentally friendly bio-based materials free from the traditional side effects of synthetics. This book delivers an overview of the advancements made in the development of natural biorenewable resources-based materials, including processing methods and p

The mechanics of fracture and fatigue have produced a huge body of research work in relation to applications to metal materials and structures. However, a variety of non-metallic materials (e.g., concrete and cementitious composites, rocks, glass, ceramics, bituminous mixtures, composites, polymers, rubber and soft matter, bones and biological materials, and advanced and multifunctional materials) have received relatively less attention, despite their attractiveness for a large spectrum of applications related to the components and structures of diverse engineering branches, applied sciences and architecture, and to the load-carrying systems of biological organisms. This book covers the broad topic of structural integrity of non-metallic materials, considering the modelling, assessment, and reliability of structural elements of any scale. Original contributions from engineers, mechanical materials scientists, computer scientists, physicists, chemists, and mathematicians are presented, applying both experimental and theoretical approaches.

Forests are “victims” of disaster when unable to provide services required by society and cannot recover within a relevant timeframe. Trees damaged may host insect pests that may kill healthy trees or become fuel for forest fires. Fallen trees also damage infrastructure.Extreme events can change the cultural and economic life of small states/islands and/or cause the breakdown of societal services.Disasters affect timber supplies, distorting market functioning. Damaged timber is susceptible to attack from insects and fungi, quickly losing value, and insect attacks may spread to healthy trees.Forests can mitigate disasters by e.g. reducing the intensity of tsunamis or stabilizing slopes. Single trees may become important refuges for people during floods.Key messages include:• Responses require planning and training to enable efficient response also in the absence of key personnel.• Information about the location of critical resources is important, e.g. key staff, forestry equipment, access routes, and timber storage sites.• It is impossible for many small countries to be resilient on their own. Development of regional response capacity is desirable, e.g. pools of qualified operators, equipment resources, and training.• Salvage timber is a resource and an economic asset. Planning on the use of forest resources after disasters is rarely undertaken, and policies or regulations covering this type of use are often missing.• Salvaging timber is dangerous and requires training.

This book addresses core questions about the role of materials in general and of wood in particular in the construction of string instruments used in the modern symphony orchestra – violins, violas, cellos and basses. Further attention is given to materials for classical guitars, harps, harpsichords and pianos. While some of the approaches discussed are traditional, most of them depend upon new scientific approaches to the study of the structure of materials, such as for example wood cell structure, which is visible only using modern high resolution microscopic techniques. Many examples of modern and classical instruments are examined, together with the relevance of classical techniques for the treatment of wood. Composite materials, especially designed for soundboards could be a good substitute for some traditional wood species. The body and soundboard of the instrument are of major importance for their acoustical properties, but the study also examines traditional and new wood species used for items such as bows, the instrument neck, string pegs, etc. Wood species’ properties for musical instruments and growth origins of woods used by great makers such as Antonio Stradivari are examined and compared with more recently grown woods available to current makers. The role of varnish in the appearance and acoustics of the final instrument is also discussed, since it has often been proposed as a ‘secret ingredient’ used by great makers. Aspects related to strings are commented.As well as discussing these subjects, with many illustrations from classical and contemporary instruments, the book gives attention to conservation and restoration of old instruments and the physical results of these techniques. There is also discussion of the current value of old instruments both for modern performances and as works of art having great monetary value.The book will be of interest and value to researchers, advanced students, music historians, and contemporary string instrument makers. Musicians in general, particularly those playing string instruments, will also find its revelations fascinating. It will also attract the attention of those using wood for a variety of other purposes, for its use in musical instruments uncovers many of its fundamental features. Professor Neville H. FletcherAustralian National University, Canberra