Design Of Fire Resistant Concrete Structures

Design of Fire-resistant Concrete Structures gives a thorough insight into the behaviour of concrete structures when exposed to fire. It mixes theory, including physics and analysed data, with practice, and shows design methods for beams, slabs, columns and walls of fire-exposed cross-sections. It explains the physical processes that concrete materials experience when exposed to high temperatures, therefore allowing engineers to make informed decisions when choosing materials and designing concrete structures.

Fire design of concrete structures has emerged in recent years as a high profile subject of great interest to both experts and the public. This has been largely prompted by severe damage to concrete in a number of recent tunnel fires, as well as a considerable amount of research and development that has taken place world-wide. fib Task Group 4.3, "Fire Design of Concrete Structures", therefore took the initiative to develop this bulletin in order to present the results of this international research to a wider group of concrete professionals. The report presents a general brief outline of the effect of fire on both concrete material and concrete structures, with emphasis placed on the important developments of the past few years, namely: (a) the increasing use of high strength concrete (HSC) in buildings, tunnels and bridges; (b) the growing acceptance of the use of performance based fire engineering calculations for the structural analysis and design against fire; (c) the problem of, and solutions to, explosive spalling; and (d) fires in tunnels. This report is not intended to be an exhaustive review of the effect of fire on concrete and concrete structures, nor to present a database of properties at high temperature. Instead, the main aims of this document are to present recent trends and developments, highlight key influencing factors, bring together the disparate but related issues in one short document, highlight the deficiencies in current practice and point to the future. The basic principles of performance based codes and fire engineering are also presented on the assumption that the reader is not a specialist in this field.

Concrete is well known to behave efficiently in fire conditions, as it is incombustible, does not emit smoke, and provides good thermal insulation. Furthermore, in reinforced concrete structures, the concrete cover gives a natural protection to the reinforcement, and the size of the sections often delays the heating of the core, thus favouring the fire resistance of the structural members. In addition, concrete structures are often robust and therefore able to accommodate local damage without major consequences to the overall structural integrity. However, past experience with real fires shows that a thorough understanding of concrete behaviour and structural mechanics is still needed to improve the design of R/C structures with respect to fire. The objective of fib Bulletin 46 is to augment the current knowledge about concrete and concrete structures under fire, not only for the design of new structures, but also for the analysis and repair of existing fire-damaged structures. Both structural and materials issues are examined, and the results of the most recent research activities on the structural performance of concrete subjected to fire are reported. Special attention is paid to the indirect actions caused by the restrained thermal deformations and several basic examples show how a local fire influences global structural behaviour. fib Bulletin 46 is intended for use by practicing engineers to improve their understanding of the behaviour of concrete structures in fire and thereby produce better and safer design standards.

Structural Design for Fire Safety, 2nd edition Andrew H. Buchanan, University of Canterbury, New Zealand Anthony K. Abu, University of Canterbury, New Zealand A practical and informative guide to structural fire engineering This book presents a comprehensive overview of structural fire engineering. An update on the first edition, the book describes new developments in the past ten years, including advanced calculation methods and computer programs. Further additions include: calculation methods for membrane action in floor slabs exposed to fires; a chapter on composite steel-concrete construction; and case studies of structural collapses. The book begins with an introduction to fire safety in buildings, from fire growth and development to the devastating effects of severe fires on large building structures. Methods of calculating fire severity and fire resistance are then described in detail, together with both simple and advanced methods for assessing and designing for structural fire safety in buildings constructed from structural steel, reinforced concrete, or structural timber. Structural Design for Fire Safety, 2nd edition bridges the information gap between fire safety engineers, structural engineers and building officials, and it will be useful for many others including architects, code writers, building designers, and firefighters. Key features: • Updated references to current research, as well as new end-of-chapter questions and worked examples. •Authors experienced in teaching, researching, and applying structural fire engineering in real buildings. • A focus on basic principles rather than specific building code requirements, for an international audience. An essential guide for structural engineers who wish to improve their understanding of buildings exposed to severe fires and an ideal textbook for introductory or advanced courses in structural fire engineering.

Designing structures to withstand the effects of fire is challenging, and requires a series of complex design decisions. This third edition of Fire Safety Engineering Design of Structures provides practising fire safety engineers with the tools to design structures to withstand fires. This text details standard industry design decisions, and offers