Design Principles And Applications Micro And Nano Technologies

Nanotechnology ("nanotech") is the manipulation of matter on an atomic, molecular, and supramolecular scale. The earliest, widespread description of nanotechnology referred to the particular technological goal of precisely manipulating atoms and molecules for fabrication of macroscale products, also now referred to as molecular nanotechnology. A more generalized description of nanotechnology was subsequently established by the National Nanotechnology Initiative, which defines nanotechnology as the manipulation of matter with at least one dimension sized from 1 to 100 nanometers. This definition reflects the fact that quantum mechanical effects are important at this quantum-realm scale, and so the definition shifted from a particular technological goal to a research category inclusive of all types of research and technologies that deal with the special properties of matter that occur below the given size threshold. It is therefore common to see the plural form "nanotechnologies" as well as "nanoscale technologies" to refer to the broad range of research and applications whose common trait is size. Because of the variety of potential applications (including industrial and military), governments have invested billions of dollars in nanotechnology research. Through its National Nanotechnology Initiative, the USA has invested 3.7 billion dollars. The European Union has invested[when?] 1.2 billion and Japan 750 million dollars.

This tutorial book offers an in-depth overview of the fundamental principles of micro/nano technologies and devices related to sensing, actuation and diagnosis in fluidics and biosystems. Research in the MEMS/NEMS and lab-on-chip fields has seen rapid growth in both academic and industrial domains, as these biodevices and systems are increasingly replacing traditional large size diagnostic tools. This book is unique in describing not only the devices and technologies but also the basic principles of their operation. The comprehensive description of the fabrication, packaging and principles of micro/nano biosystems presented in this book offers guidance for researchers designing and implementing these biosystems across diverse fields including medical, pharmaceutical and biological sciences. The book provides a detailed overview of the fundamental mechanical, optical, electrical and magnetic principles involved, together with the technologies required for the design, fabrication and characterization of micro/nano fluidic systems and bio-devices. Written by a collaborative team from France and Korea, the book is suitable for academics, researchers, advanced level students and industrial manufacturers.

Nano-Bioremediation: Fundamentals and Applications explores how nano-bioremediation is used to remedy environmental pollutants. The book's chapters focus on the design, fabrication and application of advanced nanomaterials and their integration with biotechnological processes for the monitoring and treatment of pollutants in environmental matrices. It is an important reference source for materials scientists, engineers and environmental scientists who are looking to increase their understanding of bioremediation at the nanoscale. The mitigation of environmental pollution is the biggest challenge to researchers and the scientific community, hence this book provides answers to some important questions. As an advanced hybrid technology, nano-bioremediation refers to the integration of nanomaterials and bioremediation for the remediation of pollutants. The rapid pace of urbanization, massive development of industrial sectors, and modern agricultural practices all cause a controlled or uncontrolled release of environmentally-related hazardous contaminants that are seriously threatening every key sphere, including the atmosphere, hydrosphere, biosphere, lithosphere, and anthroposphere. Explores the current and potential applications of nano-bioremediation in the remediation of hazardous pollutants Outlines the major properties and classes of nanomaterials that make them efficient bioremediation agents Assesses the major challenges of effectively implementing bioremediation techniques at the nanoscale

Introducing the fields of nanomaterials and devices, and their applications across a wide range of academic disciplines and industry sectors, Donglu Shi bridges knowledge acquisition and practical work, providing a starting point for the research and development of applications. The book describes characterization of nanomaterials, their preparation methods and performance testing techniques; the design and development of nano-scale devices; and the applications of nanomaterials, with examples taken from different industry sectors, such as lighting, energy, bioengineering and medicine / medical devices. Key nanomaterial types are covered, such as carbon nanotubes, nanobiomaterials, nano-magnetic materials, semiconductor materials and nanocomposites. Shi also provides detailed coverage of key emerging technologies such as DNA nanotechnology and spintronics. The resulting text is equally relevant for advanced students (senior and graduate) and for engineers and scientists from a variety of different academic backgrounds working in the multi-disciplinary field of nanotechnology. Provides detailed guidance for the characterization of nanomaterials, their preparation, and performance testing Explains the principles and challenges of the design and development of nano-scale devices Explores applications through cases taken from a range of different sectors, including electronics, energy and medicine.

Research and innovation in areas such as circuits, microsystems, packaging, biocompatibility, miniaturization, power supplies, remote control, reliability, and lifespan are leading to a rapid increase in the range of devices and corresponding applications in the field of wearable and implantable biomedical microsystems, which are used for monitoring, diagnosing, and controlling the health conditions of the human body. This book provides comprehensive coverage of the fundamental design principles and validation for implantable microsystems, as well as several major application areas. Each component in an implantable device is described in details, and major case studies demonstrate how these systems can be optimized for specific design objectives. The case studies include applications of implantable neural signal processors, brain-machine interface (BMI) systems intended for both data recording and treatment, neural prosthesis, bladder pressure monitoring for treating urinary incontinence, implantable imaging devices for early detection and diagnosis of diseases as well as electrical conduction block of peripheral nerve for chronic pain management. Implantable Biomedical Microsystems is the first comprehensive coverage of bioimplantable system design providing an invaluable information source for researchers in Biomedical, Electrical, Computer, Systems, and Mechanical Engineering as well as engineers involved in design and development of wearable and implantable bioelectronic devices and, more generally, teams working on low-power microsystems and their corresponding wireless energy and data links. First time comprehensive coverage of system-level and component-level design and engineering aspects for implantable microsystems. Provides insight into a wide range of proven applications and application specific design trade-offs of bioimplantable systems, including several major case studies Enables Engineers involved in development of implantable electronic systems to optimize applications for specific design objectives.

In daily life, we are accustomed to working with length scales of feet or meters, but the building blocks from which our bodies are constructed are many orders of magnitude smaller. The technologies that are being developed to intervene at these minute scales have the potential to improve human health and significantly enrich our lives. Revolutionary micro/nano technology platforms have led to dramatic advances in sample preparation, analysis and cell culture. From the 1990s through to the very beginning of the twenty-first century, the focus was on the development of manufacturing technologies. Through elegant design and sophisticated fabrication, the micro- to nano-scale manipulation of fluids and particles has become routine. Since then, it has become possible to control molecular interactions at device surfaces, and optical manipulation, imaging and sensing techniques can also be incorporated. Micro/nano technology platforms are already being used to study and direct biological processes at the cellular and sub-cellular level, and to detect disease with greater sensitivity and specificity. The challenges and excitement in the near future will be in engineering these sophisticated, multifunctional devices to seamlessly interface with complex biological systems. Providing a clear guide that moves from molecules through devices to systems, this book reviews fundamental aspects of microfluidic devices, including fabrication, surface property control, pressure-driven and electrokinetic flow, and functions such as fluid mixing, particle sorting and molecular separations. The integration of optical and plasmonic imaging, optoelectronic tweezers for single particle manipulation, and optical and electrical signal transduction methods for biosensing are shown to provide extraordinary capabilities for bioanalytical and biomedical applications. These represent key areas of research that will lead to the next generation of micro/nano-based systems. Anyone working in this fast-changing field will benefit from this comprehensive review of the latest thinking, while researchers will find much to inspire and direct their work.

Working at the nano-scale demands an understanding of the high-precision measurement techniques that make nanotechnology and advanced manufacturing possible. Richard Leach introduces these techniques to a broad audience of engineers and scientists involved in nanotechnology and manufacturing applications and research. He also provides a routemap and toolkit for metrologists engaging with the rigor of measurement and data analysis at the nano-scale. Starting from the fundamentals of precision measurement, the author progresses into different measurement and characterization techniques. The focus on nanometrology in engineering contexts makes this book an essential guide for the emerging nanomanufacturing / nanofabrication sector, where measurement and standardization requirements are paramount both in product specification and quality assurance. This book provides engineers and scientists with the methods and understanding needed to design and produce high-performance, long-lived products while ensuring that compliance and public health requirements are met. Updated to cover new and emerging technologies, and recent developments in standards and regulatory frameworks, this second edition includes many new sections, e.g. new technologies in scanning probe and e-beam microscopy, recent developments in interferometry and advances in co-ordinate metrology. Demystifies nanometrology for a wide audience of engineers, scientists, and students involved in nanotech and advanced manufacturing applications and research Introduces metrologists to the specific techniques and equipment involved in measuring at the nano-scale or to nano-scale uncertainty Fully updated to cover the latest technological developments, standards, and regulations

Fundamental Principles of Engineering Nanometrology provides a comprehensive overview of engineering metrology and how it relates to micro and nanotechnology (MNT) research and manufacturing. By combining established knowledge with the latest advances from the field, it presents a comprehensive single volume that can be used for professional reference and academic study. Provides a basic introduction to measurement and instruments Thoroughly presents numerous measurement techniques, from static length and displacement to surface topography, mass and force Covers multiple optical surface measuring instruments and related topics (interferometry, triangulation, confocal , variable focus, and scattering instruments) Explains, in depth, the calibration of surface topography measuring instruments (traceability; calibration of profile and areal surface texture measuring instruments; uncertainties) Discusses the material in a way that is comprehensible to even those with only a limited mathematical knowledge