Development Of Infrared Techniques For Practical Defect Identification In Bonded Joints

Maximizing reader insights into the use of thermography, specifically pulsed and pulse phase thermography (PT and PPT), for the identification of kissing defects in adhesive bonds, this thesis focuses on the application of PT and PPT for the identification of a range of defect types in a variety of materials to establish the effect of material properties on identification of defects. Featuring analysis of a numerical model developed to simulate the thermal evolution created during a PT or PPT experiment, after validation through a series of case studies, this model is then used as a predictive tool to relate defect detectability to the thermal property contrast between defect and bulk materials. Demonstrating a means of producing realistic kissing defects in bonded joints where insufficient thermal property contrast exists defects have a limited effect on heat propagation through a component and therefore are not detected using PT or PPT, this thesis discusses the addition of a small load to bonds containing kissing defects which was found to open the defects sufficiently to enable their detection. A low cost infrared detector, Flir Tau320, is compared to the research based photon detector, Flir SC5000, and is shown to be suitable for application in PT, thus enabling a significantly lower cost tool to be developed.

This book comprises the proceedings of the Conference and Exhibition on Non Destructive Evaluation, (NDE 2019). The contents of the book encompass a vast spectrum from Conventional to Advanced NDE including novel methods, instrumentation, sensors, procedures and data analytics as applied to all industry segments for quality control, periodic maintenance, life estimation, structural integrity and related areas. This book will be a useful reference for students, researchers and practitioners.

Electromagnetic Non-destructive Evaluation (ENDE) is an invaluable, non-invasive diagnostic tool for the inspection, testing, evaluation and characterization of materials and structures. It has now become indispensible in a number of diverse fields ranging from biomedics to many branches of industry and engineering. This book presents the proceedings of the 24th International Workshop on Electromagnetic Nondestructive Evaluation, held in Chengdu, China from 11 - 14 September 2019. The 38 peer-reviewed and extended contributions included here were selected from 45 original submissions, and are divided into 7 sections: eddy current testing and evaluation; advanced sensors; analytical and numerical modeling; material characterization; inverse problem and signal processing; artificial intelligence in ENDE; and industrial applications of ENDE. The papers cover recent studies concerning the progress and application of electromagnetic (EM) fields in the non-destructive examination of materials and structures, and topics covered include evaluations at a micro-structural level, such as correlating the magnetic properties of a material with its grain structure, and a macroscopic level, such as techniques and applications for EM NDT&E. Recent developments and emerging materials such as advanced EM sensors, multi-physics NDT&E, intelligent data management and maintaining the integrity of structures are also explored. The book provides a current overview of developments in ENDE, and will be of interest to all those working in the field.

The increased use of polymer matrix composites in structural applications has led to the growing need for a very high level of quality control and testing of products to ensure and monitor performance over time. Non-destructive evaluation (NDE) of polymer matrix composites explores a range of NDE techniques and the use of these techniques in a variety of application areas. Part one provides an overview of a range of NDE and NDT techniques including eddy current testing, shearography, ultrasonics, acoustic emission, and dielectrics. Part two highlights the use of NDE techniques for adhesively bonded applications. Part three focuses on NDE techniques for aerospace applications including the evaluation of aerospace composites for impact damage and flaw characterisation. Finally, the use of traditional and emerging NDE techniques in civil and marine applications is explored in part four. With its distinguished editor and international team of expert contributors, Non-destructive evaluation (NDE) of polymer matrix composites is a technical resource for researchers and engineers using polymer matrix composites, professionals requiring an understanding of non-destructive evaluation techniques, and academics interested in this field. Explores a range of NDE and NDT techniques and considers future trends Examines in detail NDE techniques for adhesively bonded applications Discusses NDE techniques in aerospace applications including detecting impact damage, ultrasonic techniques and structural health monitoring