Device And Materials Modeling In Pem Fuel Cells

Computational studies on fuel cell-related issues are increasingly common. These studies range from engineering level models of fuel cell systems and stacks to molecular level, electronic structure calculations on the behavior of membranes and catalysts, and everything in between. This volume explores this range. It is appropriate to ask what, if anything, does this work tell us that we cannot deduce intuitively? Does the emperor have any clothes? In answering this question resolutely in the affirmative, I will also take the liberty to comment a bit on what makes the effort worthwhile to both the perpetrator(s) of the computational study (hereafter I will use the blanket terms modeler and model for both engineering and chemical physics contexts) and to the rest of the world. The requirements of utility are different in the two spheres. As with any activity, there is a range of quality of work within the modeling community. So what constitutes a useful model? What are the best practices, serving both the needs of the promulgator and consumer? Some of the key com- nents are covered below. First, let me provide a word on my ‘credentials’ for such commentary. I have participated in, and sometimes initiated, a c- tinuous series of such efforts devoted to studies of PEMFC components and cells over the past 17 years. All that participation was from the experim- tal, qualitative side of the effort.

This book is a comprehensive introduction to the rapidly developing field of modeling and characterization of PEM fuel cells. It focuses on i) fuel cell performance modeling and performance characterization applicable from single cells to stacks, ii) fundamental and advanced techniques for structural and compositional characterization of fuel cell components and iii) electrocatalyst design. Written by experts in this field, this book is an invaluable tool for graduate students and professionals.

Although, the basic concept of a fuel cell is quite simple, creating new designs and optimizing their performance takes serious work and a mastery of several technical areas. PEM Fuel Cell Modeling and Simulation Using Matlab, provides design engineers and researchers with a valuable tool for understanding and overcoming barriers to designing and building the next generation of PEM Fuel Cells. With this book, engineers can test components and verify designs in the development phase, saving both time and money. Easy to read and understand, this book provides design and modelling tips for fuel cell components such as: modelling proton exchange structure, catalyst layers, gas diffusion, fuel distribution structures, fuel cell stacks and fuel cell plant. This book includes design advice and MATLAB and FEMLAB codes for Fuel Cell types such as: polymer electrolyte, direct methanol and solid oxide fuel cells. This book also includes types for one, two and three dimensional modeling and two-phase flow phenomena and microfluidics. *Modeling and design validation techniques *Covers most types of Fuel Cell including SOFC *MATLAB and FEMLAB modelling codes *Translates basic phenomena into mathematical equations

Fuel cells are expected to play a major role in the future power supply that will transform to renewable, decentralized and fluctuating primary energies. At the same time the share of electric power will continually increase at the expense of thermal and mechanical energy not just in transportation, but also in households. Hydrogen as a perfect fuel for fuel cells and an outstanding and efficient means of bulk storage for renewable energy will spearhead this development together with fuel cells. Moreover, small fuel cells hold great potential for portable devices such as gadgets and medical applications such as pacemakers. This handbook will explore specific fuel cells within and beyond the mainstream development and focuses on materials and production processes for both SOFC and lowtemperature fuel cells, analytics and diagnostics for fuel cells, modeling and simulation as well as balance of plant design and components. As fuel cells are getting increasingly sophisticated and industrially developed the issues of quality assurance and methodology of development are included in this handbook. The contributions to this book come from an international panel of experts from academia, industry, institutions and government. This handbook is oriented toward people looking for detailed information on specific fuel cell types, their materials, production processes, modeling and analytics. Overview information on the contrary on mainstream fuel cells and applications are provided in the book 'Hydrogen and Fuel Cells', published in 2010.

PEM Fuel Cells: Fundamentals, Advanced Technologies, and Practical Application provides a comprehensive introduction to the principles of PEM fuel cell, their working condition and application, and the latest breakthroughs and challenges for fuel cell technology. Each chapter follows a systematic and consistent structure with clear illustrations and diagrams for easy understanding. The opening chapters address the basics of PEM technology; stacking and membrane electrode assembly for PEM, degradation mechanisms of electrocatalysts, platinum dissolution and redeposition, carbon-support corrosion, bipolar plates and carbon nanotubes for the PEM, and gas diffusion layers. Thermodynamics, operating conditions, and electrochemistry address fuel cell efficiency and the fundamental workings of the PEM. Instruments and techniques for testing and diagnosis are then presented alongside practical tests. Dedicated chapters explain how to use MATLAB and COMSOL to conduct simulation and modeling of catalysts, gas diffusion layers, assembly, and membrane. Degradation and failure modes are discussed in detail, providing strategies and protocols for mitigation. High-temperature PEMs are also examined, as are the fundamentals of EIS. Critically, the environmental impact and life cycle of the production and storage of hydrogen are addressed, as are the risk and durability issues of PEMFC technology. Dedicated chapters are presented on the economics and commercialization of PEMFCs, including discussion of installation costs, initial capital costs, and the regulatory frameworks; apart from this, there is a separate chapter on their application to the automotive industry. Finally, future challenges and applications are considered. PEM Fuel Cells: Fundamentals, Advanced Technologies, and Practical Application provides an in-depth and comprehensive reference on every aspect of PEM fuel cells fundamentals, ideal for researchers, graduates, and students. Presents the fundamentals of PEM fuel cell technology, electrolytes, membranes, modeling, conductivity, recent trends, and future applications Addresses commercialization, public policy, and the environmental impacts of PEMFC in dedicated chapters Presents state-of-the-art PEMFC research alongside the underlying concepts

Demand for fuel cell technology is growing rapidly. Fuel cells are being commercialized to provide power to buildings like hospitals and schools, to replace batteries in portable electronic devices, and as replacements for internal combustion engines in vehicles. PEM (Proton Exchange Membrane) fuel cells are lighter, smaller, and more efficient than other types of fuel cell. As a result, over 80% of fuel cells being produced today are PEM cells. This new edition of Dr. Barbir’s groundbreaking book still lays the groundwork for engineers, technicians and students better than any other resource, covering fundamentals of design, electrochemistry, heat and mass transport, as well as providing the context of system design and applications. Yet it now also provides invaluable information on the latest advances in modeling, diagnostics, materials, and components, along with an updated chapter on the evolving applications areas wherein PEM cells are being deployed. Comprehensive guide covers all aspects of PEM fuel cells, from theory and fundamentals to practical applications Provides solutions to heat and water management problems engineers must face when designing and implementing PEM fuel cells in systems Hundreds of original illustrations, real-life engineering examples, and end-of-chapter problems help clarify, contextualize, and aid understanding

A Detailed, Up-to-Date Treatment of Key Developments in PEMFC Materials The potential to revolutionize the way we power our world Because of its lower temperature and special polymer electrolyte membrane, the proton exchange membrane fuel cell (PEMFC) is well-suited for transportation, portable, and micro fuel cell applications. But the performance of these fuel cells critically depends on the materials used for the various cell components. Durability, water management, and reducing catalyst poisoning are important factors when selecting PEMFC materials. Written by international PEMFC scientists and engineers from top-level organizations, Proton Exchange Membrane Fuel Cells: Materials Properties and Performance provides a single resource of information for understanding how to select and develop materials for improved PEMFC performance. The book focuses on the major components of the fuel cell unit, along with design and modeling aspects. It covers catalysts and catalyst layers, before discussing the key components of membranes, diffusion layers, and bipolar plates. The book also explores materials modeling for the PEMFC. This volume assesses the current status of PEMFC fuel cell technology, research and development directions, and the scientific and engineering challenges facing the fuel cell community. It demonstrates how the production of a commercially viable PEMFC requires a compromise of materials with adequate properties, design interaction, and manufacturability.

The second edition of PEM Fuel Cell Modeling and Simulation provides design engineers and researchers with a valuable and completely updated tool for understanding and overcoming barriers to designing and building fuel cells and fuel cell systems. Starting from the basic concept of a fuel cell, this book presents tools for creating new designs and optimizing their performance. It provides information on how to test components and verify designs in the development phase, saving both time and money. Also included are design and modelling tips for fuel cell components such as exchange structure, catalyst layers, gas diffusion and fuel distribution structures, as well as for fuel cell stacks and fuel cell plants. MATLAB® and FEMLAB codes for polymer electrolyte, direct methanol and solid oxide fuel cells are made available, covering types for one, two and three dimensional modeling and two-phase flow phenomena and microfluidics. Chapters have been updated and/or expanded in this new edition. New sections have been added to bring more details on topics like degradation in the proton exchange membrane and the catalyst layer, effect of compression of the gas diffusion layer, hydrogen and oxygen crossover modeling, transient behavior modeling, fuel cell modeling assumptions and limitations, fuel cell systems design for vehicles and buildings. It is an indispensable reference for all those involved in fuel cell modeling, especially engineers involved in planning and simulating fuel cell systems or fuel cell integration into energy systems, energy researchers interested in modeling all aspects of fuel cells, from individual components to entire systems, and graduate students entering this field. This new edition has been updated to include the most current knowledge in the field, and its content has been expanded to cover several new topics, such as degradation in the proton exchange membrane and the catalyst layer, effect of compression of the gas diffusion layer, hydrogen and oxygen crossover modeling, transient behavior modeling, fuel cell modeling assumptions and limitations, fuel cell systems design for vehicles and buildings Includes MATLAB® and FEMLAB modelling codes applicable for polymer electrolyte, direct methanol and solid oxide fuel cells Translates basic phenomena into mathematical equations