Disturbance Observer Based Control

Due to its abilities to compensate disturbances and uncertainties, disturbance observer based control (DOBC) is regarded as one of the most promising approaches for disturbance-attenuation. One of the first books on DOBC, Disturbance Observer Based Control: Methods and Applications presents novel theory results as well as best practices for applica

Control of Integral Processes with Dead Time provides a unified and coherent review of the various approaches devised for the control of integral processes, addressing the problem from different standpoints. In particular, the book treats the following topics: How to tune a PID controller and assess its performance; How to design a two-degree-of-freedom control scheme in order to deal with both the set-point following and load disturbance rejection tasks; How to modify the basic Smith predictor control scheme in order to cope with the presence of an integrator in the process; and how to address the presence of large process dead times. The methods are presented sequentially, highlighting the evolution of their rationale and implementation and thus clearly characterising them from both academic and industrial perspectives.

Motion Control Systems is concerned with design methods that support the never-ending requirements for faster and more accurate control of mechanical motion. The book presents material that is fundamental, yet at the same time discusses the solution of complex problems in motion control systems. Methods presented in the book are based on the authors' original research results. Mathematical complexities are kept to a required minimum so that practicing engineers as well as students with a limited background in control may use the book. It is unique in presenting know-how accumulated through work on very diverse problems into a comprehensive unified approach suitable for application in high demanding, high-tech products. Major issues covered include motion control ranging from simple trajectory tracking and force control, to topics related to haptics, bilateral control with and without delay in measurement and control channels, as well as control of nonredundant and redundant multibody systems. Provides a consistent unified theoretical framework for motion control design Offers graduated increase in complexity and reinforcement throughout the book Gives detailed explanation of underlying similarities and specifics in motion control Unified treatment of single degree-of-freedom and multibody systems Explains the fundamentals through implementation examples Based on classroom-tested materials and the authors' original research work Written by the leading researchers in sliding mode control (SMC) and disturbance observer (DOB) Accompanying lecture notes for instructors Simulink and MATLAB® codes available for readers to download Motion Control Systemsis an ideal textbook for a course on motion control or as a reference for post-graduates and researchers in robotics and mechatronics. Researchers and practicing engineers will also find the techniques helpful in designing mechanical motion systems.

Developing the essential theory for architecting and tackling issues faced during complex realistic engineering problems, this volume focuses on enhanced anti-disturbance control and filtering theory and applications. The book specifically addresses the novel disturbance observer based control (DOBC) methodologies for uncertain and nonlinear systems in time domain. It also examines novel anti-disturbance control and filtering with the composite hierarchical architecture to enhance control and filtering for the complex control systems with multiple disturbances. The book provides application examples, including flight control, robotic system, altitude control, and initial alignment to show how to use the theoretical methods in engineering

The sliding mode control methodology has proven effective in dealing with complex dynamical systems affected by disturbances, uncertainties and unmodeled dynamics. Robust control technology based on this methodology has been applied to many real-world problems, especially in the areas of aerospace control, electric power systems, electromechanical systems, and robotics. Sliding Mode Control and Observation represents the first textbook that starts with classical sliding mode control techniques and progresses toward newly developed higher-order sliding mode control and observation algorithms and their applications. The present volume addresses a range of sliding mode control issues, including: *Conventional sliding mode controller and observer design *Second-order sliding mode controllers and differentiators *Frequency domain analysis of conventional and second-order sliding mode controllers *Higher-order sliding mode controllers and differentiators *Higher-order sliding mode observers *Sliding mode disturbance observer based control *Numerous applications, including reusable launch vehicle and satellite formation control, blood glucose regulation, and car steering control are used as case studies Sliding Mode Control and Observation is aimed at graduate students with a basic knowledge of classical control theory and some knowledge of state-space methods and nonlinear systems, while being of interest to a wider audience of graduate students in electrical/mechanical/aerospace engineering and applied mathematics, as well as researchers in electrical, computer, chemical, civil, mechanical, aeronautical, and industrial engineering, applied mathematicians, control engineers, and physicists. Sliding Mode Control and Observation provides the necessary tools for graduate students, researchers and engineers to robustly control complex and uncertain nonlinear dynamical systems. Exercises provided at the end of each chapter make this an ideal text for an advanced course taught in control theory.

A concise, in-depth introduction to active disturbance rejection control theory for nonlinear systems, with numerical simulations and clearly worked out equations Provides the fundamental, theoretical foundation for applications of active disturbance rejection control Features numerical simulations and clearly worked out equations Highlights the advantages of active disturbance rejection control, including small overshooting, fast convergence, and energy savings

New Trends in Observer-Based Control: A Practical Guide to Process and Engineering Applications presents a concise introduction to the latest advances in observer-based control design. The book gives a comprehensive tutorial on new trends in the design of observer-based controllers for which the separation principle is well established. It covers a wide range of applications, also including worked examples that make it ideal for both advanced courses and researchers starting work in the field. This book is also particularly suitable for engineers who want to quickly and efficiently enter the field. Presents a clear-and-concise introduction to the latest advances in observer-based control design Offers content on many facets of observer-based control design Discusses key applications in the fields of power systems, robotics and mechatronics, flight and automotive systems

Covers PID control systems from the very basics to the advanced topics This book covers the design, implementation and automatic tuning of PID control systems with operational constraints. It provides students, researchers, and industrial practitioners with everything they need to know about PID control systems—from classical tuning rules and model-based design to constraints, automatic tuning, cascade control, and gain scheduled control. PID Control System Design and Automatic Tuning using MATLAB/Simulink introduces PID control system structures, sensitivity analysis, PID control design, implementation with constraints, disturbance observer-based PID control, gain scheduled PID control systems, cascade PID control systems, PID control design for complex systems, automatic tuning and applications of PID control to unmanned aerial vehicles. It also presents resonant control systems relevant to many engineering applications. The implementation of PID control and resonant control highlights how to deal with operational constraints. Provides unique coverage of PID Control of unmanned aerial vehicles (UAVs), including mathematical models of multi-rotor UAVs, control strategies of UAVs, and automatic tuning of PID controllers for UAVs Provides detailed descriptions of automatic tuning of PID control systems, including relay feedback control systems, frequency response estimation, Monte-Carlo simulation studies, PID controller design using frequency domain information, and MATLAB/Simulink simulation and implementation programs for automatic tuning Includes 15 MATLAB/Simulink tutorials, in a step-by-step manner, to illustrate the design, simulation, implementation and automatic tuning of PID control systems Assists lecturers, teaching assistants, students, and other readers to learn PID control with constraints and apply the control theory to various areas. Accompanying website includes lecture slides and MATLAB/ Simulink programs PID Control System Design and Automatic Tuning using MATLAB/Simulink is intended for undergraduate electrical, chemical, mechanical, and aerospace engineering students, and will greatly benefit postgraduate students, researchers, and industrial personnel who work with control systems and their applications.