Drilling For Water

There have been very few, if any, books of a practical nature covering the ’art’ of drilling holes in the ground especially for water. Some rather lengthy tomes are and have been available over the years which have been pretty well incomprehensible to the average field man, or indeed, those responsible for the administration of field operations. Most of those books have been written by people with peripheral disciplines to the industry thus haven’t had the field experience to really get hold of the heart of the matter. Drilling for Water - 2 has been written to be understandable to field personnel and in their own terms. Everything in it is based on considerable field experience. Following the publication of Drilling for Water, many accolades were forthcoming such as ...packed with information... ...my bible... ...most welcome... ...a breath of fresh air... ...couldn’t put it down... etc.

Oil and gas engineers today use three main factors in deciding drilling fluids: cost, performance, and environmental impact, making water-based products a much more attractive option. Water-Based Chemicals and Technology for Drilling, Completion, and Workover Fluids effectively delivers all the background and infrastructure needed for an oil and gas engineer to utilize more water-based products that benefit the whole spectrum of the well’s life cycle. Helping to mitigate critical well issues such as formation damage, fluid loss control, and borehole repair, more operators demand to know the full selection of water-based products available to consistently keep a peak well performance. This must-have training guide provides the necessary coverage in the area, broken down by type and use, along with an extensive list of supportive materials such as a chemical index of structural formulas and helpful list of references for further reading. In addition to understanding the types, special additives, and chemical compatibilities of the products available, the reader will also learn proper waste disposal techniques, including management of produced water, a component mandatory to hydraulic fracturing operations. Concise and comprehensive, Water-Based Chemicals and Technology for Drilling, Completion, and Workover Fluids details all the necessary educational content and handy references to elevate your well’s performance while lowering your environmental impact. Understand the basics and functions on all water-based fluids for drilling, completion, cementing, and enhanced oil recovery operations Get up to date with the growing need for water-based fluids in hydraulic fracturing operations including supportive materials such as an index of trade names, acronyms, and chemicals Stay responsible and know the environmental aspects and current regulations, including disposal and discharge

Discover the lost art of do-it-yourself well drilling on the cheap, and learn how to use common materials to fabricate percussion bits, sludging pipes, bailer valves, casings, screens, and much more. Included are step-by-step instructions for how to rig and operate these low-tech drilling devices to create a private water well up to 100 feet deep. Jam-packed with instructional diagrams, photos, and illustrations that provide easy-to-follow directions, this book provides the appropriate level of detail to empower even beginners to embark on their own well projects. Sections include: Percussion Drilling to Create a Well Hole, Sludging (Reverse Jetting) to Create a Well Hole, Hand Auger to Create a Well Hole, Drive Points for Creating Ready-Made Wells, Casing and Finishing Bored Well Holes, Water Flow Development of New Wells, and Hydrology Basics and Locating Groundwater.

Water Wells and Boreholes focuses on wells that are used for drinking, industry, agriculture or other supply purposes. Other types of wells and boreholes are also covered, including boreholes for monitoring groundwater level and groundwater quality. This fully revised second edition updates and expands the content of the original book whilst maintaining its practical emphasis. The book follows a life-cycle approach to water wells, from identifying a suitable well site through to successful implementation, operation and maintenance of the well, to its eventual decommissioning. Completely revised and updated throughout, Water Wells and Boreholes, Second edition, is the ideal reference for final-year undergraduate students in geology and civil engineering; graduate students in hydrogeology, civil engineering and environmental sciences; research students who use well data in their research; professionals in hydrogeology, water engineering, environmental engineering and geotechnical engineering; and aid workers and others involved in well projects.

Standard work in demand.